Manual Pengguna Gergaji Rantai Pemegang Atas Bateri Echo DCS-2500T

pengenalan

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ECHO eFORCE 56V DCS-2500T Top Handle Chainsaw. This chainsaw is designed for professional and demanding tasks, offering superior performance and lightweight handling.

Maklumat Keselamatan

Always read and understand all safety warnings and instructions before operating the chainsaw. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Peraturan Keselamatan Am

• Wear appropriate personal protective equipment (PPE) including head protection, eye protection, hearing protection, gloves, and safety footwear.
• Keep all bystanders, children, and pets at least 50 feet (15 meters) away from the work area.
• Do not operate the chainsaw in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Sentiasa kekalkan pijakan dan keseimbangan yang betul. Jangan melebihi jangkauan.
• Avoid accidental starting. Ensure the power button is off before picking up or carrying the tool.

Chainsaw Specific Safety

• Always hold the chainsaw firmly with both hands when operating.
• Be aware of kickback. Kickback may occur when the moving chain contacts an object at the upper quadrant of the guide bar or when the wood closes in and pinches the saw chain in the cut.
• Do not operate the chainsaw with one hand. One-handed operation may result in serious injury to the operator, helpers, or bystanders.
• Ensure the chain brake is engaged when starting the chainsaw and when moving between cuts.
• Periksa ketegangan dan pelinciran rantai secara kerap.

Persediaan

Your ECHO DCS-2500T chainsaw requires minimal assembly before first use.

Kandungan Pakej

• ECHO DCS-2500T Chainsaw Unit
• 12-inch Guide Bar
• Rantai Gergaji
• 56V 2.5Ah eFORCE Battery
• eFORCE Battery Charger
• Penutup Bar Panduan
• Manual Operator

Arahan Perhimpunan

1. Install Guide Bar and Chain:

   Remove the side cover by loosening the bolt.

   Carefully place the chain around the drive sprocket and then align it with the groove of the guide bar.

   Position the guide bar and chain onto the chainsaw body, ensuring the chain tension pin fits into the hole on the guide bar.

   Replace the side cover and hand-tighten the bolt. Do not fully tighten yet.

   

   Image: A user demonstrating the assembly of the chainsaw, highlighting the guide bar and chain attachment point.
2. Selaraskan Ketegangan Rantai:

   Use the chain tensioning screw (usually located on the side cover) to adjust the chain tension. The chain should be snug against the guide bar but still able to be pulled freely by hand.

   Once tension is correct, fully tighten the side cover bolt.

3. Fill Oil Reservoir:

   Locate the oil reservoir cap on the chainsaw body.

   Fill the reservoir with high-quality bar and chain oil. Do not use motor oil or other lubricants.

   

   Image: The Echo DCS-2500T chainsaw, its battery, and charger. The oil reservoir cap is visible on the chainsaw body.

Pengecasan Bateri

1. Cas Bateri:

   Insert the 56V eFORCE battery into the charger. Ensure it clicks into place.

   Sambungkan pengecas ke salur keluar kuasa standard.

   The charger's LED indicators will show the charging status (e.g., red for charging, green for fully charged).

   Benarkan bateri dicas sepenuhnya sebelum penggunaan pertama.

2. Pasang Bateri:

   Setelah dicas sepenuhnya, keluarkan bateri daripada pengecas.

   Insert the battery into the battery compartment of the chainsaw until it locks securely.

Arahan Operasi

Memulakan Gergaji

1. Pastikan brek rantai telah dilepaskan (ditarik ke belakang ke arah pemegang hadapan).
2. Press the power button (usually indicated by a power symbol) to turn on the chainsaw. A green indicator light will illuminate.
3. Grasp the front handle with your left hand and the rear handle with your right hand.
4. Depress the safety lock-out button (if present) and then squeeze the trigger to start the chain.

Teknik Memotong

• Mendaki: Remove branches from a fallen tree. Work from the bottom up, cutting small branches first.
• Meletak: Cut a fallen log into sections. Use a sawhorse or elevated support to prevent the chain from hitting the ground.
• Menebang: (For experienced users only) Carefully plan the felling direction, clear the area, and make proper felling cuts.

Stopping the Chainsaw

Release the trigger. The chain will stop immediately.

Engage the chain brake by pushing it forward.

Press the power button to turn off the chainsaw for storage or extended breaks.

Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan hayat gergaji anda.

Selepas Setiap Penggunaan

• Clean the Chainsaw: Remove sawdust, chips, and debris from the guide bar, chain, and motor housing.
• Semak Ketegangan Rantaian: Adjust if necessary.
• Periksa Paras Minyak: Refill the bar and chain oil reservoir.
• Inspect Chain: Check for dullness, damage, or loose rivets. Sharpen or replace as needed.
• Inspect Guide Bar: Check for burrs or wear.

Penyelenggaraan Berkala

• Sharpen Chain: A sharp chain cuts efficiently and safely. Use a round file of the correct size for your chain.
• Penapis Udara Bersih: (If applicable, though battery models often have less complex filters) Refer to the specific instructions for your model.
• Check Battery and Charger: Ensure they are free from damage and functioning correctly.

Menyelesaikan masalah

Spesifikasi

• Model: DCS-2500-12C1
• Jenama: Echo
• Panjang Bar: 12 inci
• Sistem Bateri: ECHO eFORCE 56V
• Kapasiti Bateri: 2.5Ah
• Jenis Motor: Tanpa berus
• Berat Barang: 1 auns
• Dimensi Produk: 14"L x 14"W x 14"H
• Kuasa kuda: 5.3 hp
• Tarikh Tersedia Pertama: 6 Mei 2022

Waranti dan Sokongan

For warranty information and technical support, please refer to the official Echo product registration or contact Echo customer service directly. Keep your purchase receipt for warranty claims.

Visit Echo Support Webtapak