GRAUGEAR M.2 2280 NVMe SATA SSD Heatsink

1. Produk Lebihview

The GRAUGEAR G-PS5HS02 is an aluminum alloy heatsink designed to enhance the thermal performance of M.2 2280 NVMe and SATA SSDs. It is compatible with both PlayStation 5 consoles and personal computers, effectively reducing SSD operating temperatures by up to 20°C. This helps maintain optimal performance and prolong the lifespan of your SSD.

Image 1.1: The GRAUGEAR G-PS5HS02 heatsink installed in a PlayStation 5 console, demonstrating its compact and effective design for memory expansion.

2. Kandungan Pakej

Sila sahkan bahawa semua komponen terdapat dalam pakej:

• 1 x GRAUGEAR G-PS5HS02 Heatsink
• 2 x Silicone Thermal Pads
• 1 x SSD Mounting Screw
• 1 x Pemutar skru
• 1 x Manual Pengguna
• 1 x Kad Jaminan

Image 2.1: All items included in the GRAUGEAR G-PS5HS02 heatsink kit, laid out for inspection.

3. Persediaan dan Pemasangan

Follow these steps to install the GRAUGEAR G-PS5HS02 heatsink onto your M.2 2280 SSD:

1. Prepare the SSD: Carefully remove any existing labels or stickers from your M.2 2280 SSD to ensure proper contact with the thermal pads.
2. Sapukan Pad Termal: Peel off the protective films from both sides of the two silicone thermal pads. Place one thermal pad on the top surface of the SSD and the other on the bottom surface. Ensure they cover the main components of the SSD.
3. Attach Heatsink: Gently place the GRAUGEAR heatsink onto the SSD, aligning it so that the thermal pads make full contact with both the SSD and the heatsink. The heatsink is designed with an aluminum groove structure for optimal heat transfer.
4. Selamatkan Perhimpunan: Insert the SSD with the attached heatsink into the M.2 slot of your PlayStation 5 or PC motherboard. Use the provided SSD mounting screw and screwdriver to secure the SSD in place.

Image 3.1: Exploded diagram showing the assembly order of the heatsink, thermal pads, and M.2 SSD.

Image 3.2: Visual guide for installing the heatsink and SSD into the designated slot, highlighting the precise fit.

Panduan Video Pemasangan

Video 3.1: An official GRAUGEAR video demonstrating the step-by-step installation process of the M.2 SSD heatsink.

4. Prinsip Operasi

The GRAUGEAR G-PS5HS02 heatsink operates passively, utilizing its aluminum alloy plate-fin design to maximize surface area for heat dissipation. Heat generated by the M.2 SSD is transferred through the thermal pads to the heatsink, which then releases the heat into the surrounding air. This process effectively lowers the SSD's operating temperature, preventing thermal throttling and ensuring consistent high performance.

Image 4.1: Visual representation of temperature reduction with the GRAUGEAR heatsink, illustrating improved cooling efficiency.

Image 4.2: Illustration of the aluminum groove design facilitating airflow and heat transfer away from the M.2 SSD.

5. Penyelenggaraan

The GRAUGEAR G-PS5HS02 heatsink requires minimal maintenance. Periodically, inspect the heatsink for dust accumulation. If dust is present, gently clean it using a soft brush or compressed air to ensure optimal airflow and heat dissipation. Avoid using liquid cleaners directly on the heatsink or SSD.

6. Penyelesaian masalah

If you experience issues after installing the heatsink, consider the following:

• SSD Tidak Dikesan: Ensure the M.2 SSD is fully seated in its slot and the mounting screw is securely fastened.
• Kebimbangan Terlalu Panas: Verify that the thermal pads are correctly applied and making full contact with both the SSD and the heatsink. Ensure there is adequate airflow within your system's chassis or PlayStation 5.
• Kerosakan Fizikal: Inspect the heatsink and SSD for any visible damage. If damage is found, contact customer support.

7. Spesifikasi

8. Waranti dan Sokongan

GRAUGEAR products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the included Guarantee Card or visit the official GRAUGEAR webtapak: www.graugear.de.