Produk Selesaiview
The LIGHTAILING LED Lighting Kit is an accessory designed to illuminate your Lego 21335 Motorized Lighthouse model. This kit enhances the visual appeal of your model by adding functional lighting to various sections, including the lighthouse tower, the keeper's cottage, and the surrounding base. Please note: The Lego 21335 Motorized Lighthouse model is not included with this lighting kit.
Image: The Lego 21335 Motorized Lighthouse model fully illuminated by the LIGHTAILING LED lighting kit.
Imej: Terperinci view of the illuminated interior of the lighthouse tower.
Video: A demonstration of the LIGHTAILING LED Lighting Kit installed on the Lego 21335 Motorized Lighthouse, showing various illuminated sections and effects.
Kandungan Pakej
Upon opening your LIGHTAILING LED Lighting Kit, please verify that all the following components are present:
- 1 x LED Light Kit (various individual LED lights and connecting wires)
- 1 x Battery Box (for power supply, batteries not included)
- 1 x Paper Instruction Guide
Image: The complete contents of the LIGHTAILING LED Lighting Kit package.
Garis Panduan Keselamatan
To ensure safe operation and prevent damage to the lighting kit or your Lego model, please adhere to the following guidelines:
- Bekalan Kuasa: The power supply should be less than 5V. Using a higher voltage may cause damage to the LED components.
- Jenis Bateri: If using the battery box, ensure you use three AA batteries (not included).
- Pengendalian: Install the LED lights carefully. Avoid hard pulling, bending, or shaking the wires and components, as this can cause breakage.
- Ujian: Before final installation, it is recommended to test the product to ensure it functions properly.
Persediaan dan Pemasangan
The installation of the LIGHTAILING LED Lighting Kit requires careful attention to detail. The provided paper instructions offer a visual guide. For additional assistance, you may scan the QR code on the product box for online installation videos.
Langkah Pemasangan Umum:
- Penyediaan: Ensure your Lego 21335 Motorized Lighthouse model is fully assembled and accessible for light installation.
- Pengenalan Komponen: Familiarize yourself with the various LED components and wires provided in the kit.
- penempatan: Follow the instruction guide to strategically place the LED lights within the Lego model. This often involves carefully routing wires between Lego bricks and attaching small LED components.
- Sambungan: Connect the individual LED light wires to the main circuit board or connectors as indicated in the instructions.
- Sambungan Kuasa: Connect the entire lighting system to the battery box or a USB power source (less than 5V).
- Ujian: Before securing all components, test the lights to ensure they are functioning correctly.
Imej: Cthample of LED light placement within the Lego model.
Image: Careful insertion of an LED light into a Lego brick.
Image: Proper routing of wires to integrate the lighting system seamlessly.
Image: Connecting the battery box to power the lights.
Arahan Operasi
Once the LIGHTAILING LED Lighting Kit is fully installed and connected to a power source (either the battery box with 3 AA batteries or a USB power source under 5V), the lights will illuminate. There are no additional controls for brightness or patterns; the lights are designed for continuous illumination when powered.
Penjagaan dan Penyelenggaraan
Untuk memastikan ketahanan dan prestasi optimum kit pencahayaan anda:
- Pembersihan: Gently dust the LED components and wires with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
- Storan: If storing the model for an extended period, disconnect the power source (remove batteries or unplug USB) to prevent battery drain or potential damage.
- Pengendalian: Continue to handle the illuminated model with care to avoid dislodging or damaging the delicate wiring.
Menyelesaikan masalah
If you encounter any issues with your LIGHTAILING LED Lighting Kit, please refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala. | No power, incorrect connection, or faulty component. | Ensure batteries are correctly inserted and charged, or USB power is connected. Check all wire connections for proper seating. Verify the power source is functioning. |
| Sesetengah lampu malap atau berkelip-kelip. | Low battery power or loose connection. | Replace batteries with fresh ones or try a different USB power source. Inspect connections for any looseness. |
| Lampu terlalu terang atau terlalu malap. | This kit does not offer adjustable brightness. | The kit is designed for a fixed brightness level. Ensure your power source is within the 5V limit. |
| Wires are visible or not neatly integrated. | Laluan yang tidak betul semasa pemasangan. | Carefully re-route wires according to the instruction manual, utilizing gaps and spaces within the Lego model for concealment. |
Spesifikasi Produk
| Ciri | Perincian |
|---|---|
| Jenama | PENCAHAYAAN |
| Nombor Model | 21335 |
| Serasi Dengan | Lego 21335 Motorized Lighthouse |
| Sumber Kuasa | 3 AA Batteries (not included) or USB Power (less than 5V) |
| Dimensi Produk (Kotak) | 6.5 x 4.72 x 1.57 inci |
| Berat Barang | 5.8 auns |
| Umur Disyorkan Pengilang | 6 tahun dan ke atas |
Sokongan dan Waranti Pelanggan
LIGHTAILING is committed to providing quality products and services. If you encounter any problems during the installation or operation of your LED lighting kit, or if you have any questions, please do not hesitate to contact our customer support team. While specific warranty details are not provided in this manual, LIGHTAILING aims to ensure customer satisfaction with their products.
For assistance, please refer to the contact information provided on the product packaging or the official LIGHTAILING webtapak.
