Manual+

Black Box KVXHP-200

Black Box KVXHP-200 KVM Extender User Manual

Model: KVXHP-200

pengenalan

The Black Box KVXHP-200 is a high-performance KVM extender designed for point-to-point extension of dual-monitor 4K DisplayPort, USB 2.0, and serial signals. It supports resolutions up to 4096x2160 at 60Hz with 8 bits per color and 4:4:4 chroma sampling. This extender utilizes a single cable for transmission, offering flexibility with both CATx and fiber optic interfaces to suit various installation requirements. It provides a true plug-and-play experience for extending KVM signals over long distances.

Black Box KVXHP-200 KVM Extender unit with various ports visible

Figure 1: Black Box KVXHP-200 KVM Extender. This image shows the main unit, highlighting its compact design and connectivity options.

Arahan Persediaan

Follow these steps to set up your KVXHP-200 KVM Extender:

  1. Matikan Peranti: Ensure all connected devices (computer, monitors, USB peripherals) are powered off before beginning the installation.
  2. Connect Source Unit:
    • Connect the DisplayPort cables from your computer's graphics card to the DisplayPort input ports on the KVXHP-200 transmitter unit.
    • Connect a USB cable from your computer's USB port to the USB input port on the transmitter unit.
    • If using serial communication, connect the serial cable from your computer to the serial port on the transmitter unit.
  3. Connect Destination Unit:
    • Connect your monitors to the DisplayPort output ports on the KVXHP-200 receiver unit.
    • Connect your USB keyboard, mouse, and other peripherals to the USB ports on the receiver unit.
    • If using serial communication, connect the serial cable from your peripheral to the serial port on the receiver unit.
  4. Unit Pemanjang Sambung: Connect the transmitter and receiver units using a single CATx cable (for copper extension) or a fiber optic cable (for fiber extension). Ensure the cable is securely connected to the appropriate port on both units.
  5. Guna Kuasa: Connect the provided power adapters to both the transmitter and receiver units and plug them into a power outlet.
  6. Hidupkan Peranti: Power on your monitors, computer, and any connected USB or serial peripherals. The KVM extender should automatically establish a connection.

Arahan Operasi

The KVXHP-200 KVM Extender operates as a transparent extension for your KVM signals. Once properly set up, no additional configuration is typically required for basic operation.

  • Pengesanan Automatik: The extender automatically detects and extends DisplayPort video, USB 2.0, and serial signals.
  • Fungsi Hab USB: The integrated USB 2.0 hub on the receiver unit allows connection of multiple USB peripherals, which will function as if directly connected to the source computer.
  • Sokongan Dwi Monitor: The extender supports two DisplayPort monitors, enabling extended desktop or mirrored display configurations as set on your source computer.

Penyelenggaraan

To ensure optimal performance and longevity of your KVXHP-200 KVM Extender, observe the following maintenance guidelines:

  • Pembersihan: Use a soft, dry cloth to clean the exterior of the units. Do not use liquid or aerosol cleaners, as they may damage the device.
  • Pengudaraan: Ensure the units are placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
  • Keadaan Persekitaran: Operate the device within its specified temperature and humidity ranges. Avoid exposing the units to extreme temperatures, direct sunlight, or excessive moisture.
  • Pengurusan Kabel: Keep cables organized and free from kinks or excessive bending, especially fiber optic cables, to prevent signal degradation or damage.

Menyelesaikan masalah

If you encounter issues with your KVXHP-200 KVM Extender, refer to the following common problems and solutions:

Masalah Kemungkinan Punca Penyelesaian
No video on monitors
  • Kabel DisplayPort yang longgar.
  • Incorrect DisplayPort input/output selection.
  • Extender link cable (CATx/fiber) not connected or damaged.
  • Power not supplied to units.
  • Source computer not outputting video.
  • Check all DisplayPort cable connections.
  • Ensure DisplayPort cables are connected to the correct ports.
  • Verify the extender link cable is securely connected and undamaged.
  • Confirm both transmitter and receiver units are powered on.
  • Check computer's video output settings and ensure it's powered on.
Peranti USB tidak bertindak balas
  • Kabel USB yang longgar.
  • USB cable from computer to transmitter not connected.
  • USB device not compatible or requiring too much power.
  • Check all USB cable connections.
  • Ensure the USB cable from the computer is connected to the transmitter.
  • Try connecting the USB device directly to the computer to verify functionality.
Kehilangan isyarat sekejap-sekejap
  • Poor quality or damaged extender link cable.
  • Panjang kabel yang berlebihan.
  • Gangguan elektromagnet (EMI).
  • Replace the extender link cable with a high-quality, certified cable.
  • Ensure cable length is within specified limits for your cable type.
  • Relocate units or cables away from potential sources of EMI.

Spesifikasi

Ciri Perincian
Nombor Model KVXHP-200
Dimensi Produk 20 x 12.8 x 6.1 inci
Berat Barang 11.15 paun
Resolusi Video Up to 4096x2160 @ 60Hz (8 bits per color, 4:4:4 chroma sampling)
Antara Muka Video DisplayPort 1.2 (Dual Monitor Support)
Antaramuka USB USB 2.0 Hub (High-Speed Transparent)
Antara muka Serial ya
Extension Medium CATx or Fiber Optic Cable
Pengeluar Black Box Network
Tarikh Mula-mula Tersedia 1 September 2022

Waranti dan Sokongan

For detailed warranty information and technical support, please refer to the documentation included with your product or visit the official Black Box Network Services website. Warranty terms and conditions may vary by region and product. Keep your proof of purchase for warranty claims.

For direct support, you can typically find contact information on the manufacturer's webtapak:

Black Box Network Services Official Webtapak