BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

pengenalan

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Ciri-ciri Produk

• Integrated Motion Sensor: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Tiga Mod Operasi:
  • Mod AUTO: Light activates when motion is detected in dark conditions.
  • Mod HIDUP: Light remains constantly on.
  • Mod G: Light activates when motion is detected in both daytime and nighttime conditions.
• Tiga Suhu Warna: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Reka Bentuk Ultra Nipis: Pro rendahfile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Pemasangan Serbaguna: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Manual Arahan (dokumen ini)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Maklumat Keselamatan

AMARAN: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Jangan cuba mengubah suai lekapan.
• Jauhkan kanak-kanak dari kawasan pemasangan.

Persediaan & Pemasangan

Ikuti langkah ini untuk pemasangan yang betul:

1. Sediakan untuk Pemasangan:
   • Matikan kuasa pada pemutus litar sebelum memulakan.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Pasang Pendakap Pelekap:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Sambungan Wayar:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Pasang Lekapan Lampu:
   • Berhati-hati masukkan semua wayar ke dalam kotak simpang.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar.

Rajah 4: Panduan visual untuk proses pemasangan.

Arahan Operasi

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Memilih Mod Pengendalian:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • AUTO: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • ON: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 saat
   • 120S: 120 saat (2 minit)
   • 180S: 180 saat (3 minit)

Figure 5: Switches for adjusting hold time and operating modes.

Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Pembersihan: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Jangka hayat LED: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Pemeriksaan: Periksa lekapan secara berkala untuk sebarang tanda kerosakan atau sambungan yang longgar. Jika terdapat sebarang masalah, putuskan bekalan elektrik dan rujuk juruelektrik yang berkelayakan.

Menyelesaikan masalah

Jika anda menghadapi masalah dengan lekapan lampu anda, rujuk masalah dan penyelesaian biasa berikut:

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webtapak. Simpan resit pembelian anda sebagai bukti pembelian.