pengenalan
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your MAF 14-Inch Queen Metal Platform Bed Frame. Please read this manual thoroughly before assembly and retain it for future reference.
Maklumat Keselamatan Penting
- Exercise caution around metal slats during assembly and use.
- Ensure all components are properly assembled and tightened before use to prevent instability.
- Jangan melebihi kapasiti berat maksimum 3000 paun.
- Jauhkan bahagian kecil daripada kanak-kanak semasa pemasangan.
Kandungan Pakej
Sebelum memulakan pemasangan, sahkan bahawa semua bahagian yang disenaraikan di bawah ada dan tidak rosak. Jika mana-mana bahagian yang hilang atau rosak, sila hubungi sokongan pelanggan.
- Bed Frame Sections (Head, Foot, Side Rails)
- Sokong Kaki
- Bilah Keluli
- Mattress Stopper(s)
- Anti-slip Rubber Pads for Legs
- Perkakasan Pemasangan (Bolt, Pencuci, Nat)
- Assembly Tool (Hex Key/Wrench)
- Manual Arahan
This image displays a table detailing various bed frame sizes, corresponding mattress dimensions, the maximum weight capacity of 3000 LBS, and the typical contents included in the box for each size, including the bed frame, instructions, screws, and wrench.
Persediaan dan Perhimpunan
Assembly of the MAF Queen Metal Platform Bed Frame is designed to be straightforward and can typically be completed by one person in approximately 20 minutes. All necessary tools are included in the package.
- Buka Pembungkusan Komponen: Tanggalkan semua bahagian dari pembungkusan dengan berhati-hati dan letakkannya di atas permukaan yang bersih dan lembut untuk mengelakkan calar. Sahkan semua bahagian terhadap senarai kandungan pakej.
- Pasang Bahagian Bingkai: Connect the main frame sections (side rails, head, and foot sections) using the provided hardware. Do not fully tighten bolts until all sections are loosely connected.
- Pasang Kaki Sokongan: Securely attach all support legs to the frame. Ensure the anti-slip rubber pads are placed on the bottom of each leg to protect your floor and prevent sliding.
- Pasang Bilah Keluli: Place the steel slats into the designated U-shaped grooves on the frame. Ensure each slat is properly seated to provide optimal mattress support and prevent movement.
- Install Mattress Stopper(s): Attach the mattress stopper(s) to the designated points on the frame. Ensure they are mounted outwards to effectively prevent the mattress from slipping.
- Pengetatan Akhir: Once all components are in place and aligned, systematically tighten all bolts using the provided wrench. Ensure all connections are secure but do not overtighten.
This image illustrates the correct way to mount the mattress stopper, showing it positioned outwards from the frame, and an incorrect example where it is mounted inwards.
Arahan Operasi
Penempatan Tilam
This platform bed frame is designed to be used without a box spring. Place your mattress directly onto the steel slats. The integrated mattress stoppers and anti-skid baffles will help keep your mattress securely in place.
This image shows the MAF bed frame with a mattress placed directly on its slats, illustrating the "No Box Spring Needed" feature.
Kapasiti Berat
The MAF 14-Inch Queen Metal Platform Bed Frame is constructed from heavy-duty steel and is capable of supporting up to 3000 pounds. Distribute weight evenly across the frame.
This image highlights the robust construction of the bed frame, emphasizing its 3000 LBS weight capacity.
Simpanan Bawah Katil
With 14 inches of height, the frame provides approximately 12.4 inches of clearance for under-bed storage, allowing you to maximize space in your bedroom.
This image demonstrates the generous 12.4-inch under-bed clearance, suitable for storing various items.
Penyelenggaraan
- Pembersihan: Lap bingkai logam dengan lembut, damp kain. Elakkan pembersih yang melelas atau bahan kimia keras yang boleh merosakkan kemasan.
- Pemeriksaan perkakasan: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary to maintain stability and prevent noise.
- Perlindungan Lantai: Ensure the rubber foot pads are intact and in place to protect your flooring and prevent the frame from sliding.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Berdecit atau Bunyi Bising | Sambungan longgar atau geseran antara bahagian logam. | Ensure all bolts are securely tightened. The frame is designed with noiseless features, including rubberized tips on slats and rubber foot pads. Check these components for proper placement. |
| Tilam Gelongsor | Mattress stoppers not installed correctly or missing. | Verify that the plastic anti-slip baffles (mattress stoppers) are correctly installed and facing outwards. Ensure the mattress is centered on the frame. |
| Ketidakstabilan Bingkai | Uneven assembly or loose hardware. | Recheck all connections and ensure they are fully tightened. Make sure the frame is on a level surface. |
Spesifikasi
- model: MT10-JD-AMZ01-14Q
- Saiz: Ratu
- Dimensi Produk: 79.5"L x 59.5"W x 14"H
- Saiz Tilam Serasi: 80" x 60"
- Bahan: Keluli Tugas Berat
- warna: Hitam
- Jenis Selesai: Matte
- Kapasiti Berat: 3000 LBS
- Ground to Item Distance (Under-bed Clearance): 12.4 Inci
- Slat Distance: 5.5 Inches (for Queen/King sizes)
- Ciri Khas: Rounded Corners, Steel Slat Support, No Box Spring Needed, Easy Assembly, Storage Space, Squeak Resistant, Anti-Slip Design
- Perhimpunan Diperlukan: ya
This image provides a visual representation of the queen bed frame's dimensions, including overall length, width, height, and under-bed storage clearance.
Waranti dan Sokongan
Maklumat Waranti
This MAF Metal Platform Bed Frame comes with a 5-year after-sale service. This warranty covers manufacturing defects and structural integrity under normal use. Please retain your proof of purchase for warranty claims.
Sokongan Pelanggan
For any questions, assistance with assembly, missing parts, or warranty claims, please contact MAF customer support. We are committed to providing a satisfactory solution as quickly as possible.
Maklumat Hubungan:
- e-mel: support@maf-sleep.com (Cthample, actual email not provided)
- telefon: 1-800-XXX-XXXX (Example, actual phone not provided)
- Webtapak: www.maf-sleep.com (Cthample, sebenarnya website not provided)
Please note: The contact email, phone, and website provided above are examples. Refer to your product packaging or purchase documentation for official MAF customer support details.
