Midea JL1643S-UF Freestanding One Touch Filter Water Purifier User Manual

pengenalan

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Midea JL1643S-UF Freestanding One Touch Filter Water Purifier. Please read this manual thoroughly before using the appliance and retain it for future reference.

Maklumat Keselamatan

Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan peralatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan kepada orang.

• Pastikan bekalan kuasa voltage matches the appliance's rating (220 Volts).
• Jangan rendam perkakas, kord, atau palam ke dalam air atau cecair lain.
• Unplug the appliance from the outlet when not in use, before cleaning, or before performing any maintenance.
• Jauhkan perkakas daripada cahaya matahari langsung dan sumber haba.
• Perkakas ini adalah untuk kegunaan dalaman sahaja.
• Jangan kendalikan perkakas dengan kord atau palam yang rosak.
• Jauhkan kanak-kanak daripada perkakas semasa operasi.

Produk Selesaiview

The Midea JL1643S-UF is a freestanding water purifier designed to provide clean, filtered water. It features a 3rd generation one-touch filter system and UV-LED sterilization.

Imej 1: Depan view of the Midea JL1643S-UF Freestanding Water Purifier. This image displays the sleek white design, the water dispenser nozzle, and the touch control panel at the top.

Komponen Utama:

• Water Dispenser Nozzle: For dispensing purified water.
• Panel Kawalan Sentuh: For operating various functions.
• Petak Penapis: Meletakkan bilik berbilangtage filter system.
• Tangki Air: 4.6 Liters capacity.
• UV-LED Sterilizer: Integrated for enhanced water purification.
• Dulang Drip: Collects any spills.

Persediaan

1. Membongkar: Carefully remove the water purifier from its packaging. Retain all packaging materials for future transport if needed.
2. penempatan: Place the freestanding unit on a flat, stable, and level surface. Ensure there is adequate space around the unit for ventilation, especially at the back and sides where air vents are located. Avoid placing it near direct heat sources or in direct sunlight.
3. Pembersihan Awal: Before first use, wipe the exterior of the unit with a soft, damp cloth. Clean the water tank and drip tray with mild soap and water, then rinse thoroughly.
4. Pemasangan Penapis:
   • Buka penutup petak penapis.
   • Insert the 3rd generation one-touch filters (PP, Pre Active Carbon, Ultrafiltration, Post Active Carbon) into their respective slots. Ensure they are securely locked in place. Refer to the markings on the filters and the unit for correct orientation.
   • Tutup penutup petak penapis.
5. Pengisian air: Fill the water tank with potable tap water. Do not exceed the maximum fill line.
6. Sambungan Kuasa: Plug the power cord into a grounded 220 Volt electrical outlet. The unit will power on, and indicator lights may illuminate.
7. Siram Awal: Dispense and discard at least 2-3 liters of water to flush the new filters and internal system before consuming.

Arahan Operasi

1. Hidupkan/Mati Kuasa: The unit typically powers on automatically when plugged in. Use the designated power button on the touch control panel to turn the unit on or off.
2. Mendispens Air:
   • Place a cup or container under the water dispenser nozzle.
   • Press the water dispense button on the touch control panel. Water will flow until the button is released or a preset volume is reached (if applicable).
3. UV-LED Sterilization: The UV-LED sterilization function operates automatically or can be activated via the touch control panel, depending on the model's specific programming. Refer to the control panel icons for UV activation status.
4. Water Leakage Protection: The unit is equipped with water leakage protection. In the event of a leak, the system is designed to automatically shut off water flow to prevent damage. If this occurs, unplug the unit and contact customer support.

Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your water purifier.

1. Peringatan Penggantian Penapis: The unit features a filter replacement reminder system. An indicator light on the control panel will illuminate when it's time to replace the filters.
2. Penggantian Penapis:
   • Unplug the water purifier from the power outlet.
   • Buka petak penapis.
   • Twist and pull out the old filters.
   • Insert new Midea JL1643S-UF compatible filters, ensuring they click into place.
   • Tutup petak penapis.
   • Plug the unit back in. Reset the filter reminder by pressing and holding the designated button (refer to control panel icons).
   • Perform an initial flush as described in the Setup section.
3. Membersihkan Unit:
   • Lap bahagian luar dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
   • Kosongkan dan bersihkan dulang titisan secara kerap.
   • For internal cleaning, follow the descaling instructions provided in a separate guide or contact customer support.

Menyelesaikan masalah

Spesifikasi

Imej 2: Midea JL1643S-UF Water Purifier with key dimensions. The image shows the height as 106cm, depth as 31cm, and width as 37.5cm.

Waranti dan Sokongan

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Midea webtapak. Jangan cuba membaiki perkakas ini sendiri.