1. Pengenalan
Terima kasih kerana memilih Easy Camp Huntsville 400 tent. This manual provides essential information for the safe and effective setup, operation, and maintenance of your tent. Please read it thoroughly before first use and retain it for future reference.
The Huntsville 400 is a spacious 4-person tent designed for camping and hiking, offering reliable shelter with its waterproof construction and durable materials.
2. Maklumat Keselamatan
- Keselamatan Kebakaran: Keep all flame and heat sources away from the tent fabric. The tent is made of flammable material and will burn if exposed to flame. Do not use gas or paraffin heaters, barbecues, or cooking appliances inside the tent.
- Pengudaraan: Ensure adequate ventilation at all times to prevent condensation and the accumulation of carbon monoxide if using any combustion appliances (which is not recommended).
- Keadaan Cuaca: While the tent is waterproof, extreme weather conditions (e.g., strong winds, heavy snow) can cause damage. Choose a sheltered pitching site and secure all guy ropes properly.
- Kanak-kanak: Supervise children around the tent, especially during setup and takedown.
- Pemilihan Tapak: Pitch your tent on level ground, away from sharp objects, overhanging branches, and potential flood areas.
3. Kandungan Pakej
Before setting up, verify that all components are present:
- Outer Tent (Rainfly)
- Khemah Dalam
- Tent Poles (Aluminum)
- Pancang/Taruhan
- Guy Ropes (pre-attached or separate)
- Bawa Beg
- Manual Arahan (dokumen ini)
4. Arahan Persediaan
The Easy Camp Huntsville 400 tent is designed for quick assembly, typically taking around 5 minutes for two people.
- Buka bungkus dan susun: Remove the tent from its carry bag and lay the outer tent (rainfly) flat on your chosen pitching site. Ensure the door is facing the desired direction.
- Pasang tiang: Connect the aluminum pole sections. Identify the correct poles for each sleeve on the outer tent.
- Masukkan tiang: Slide the assembled poles through the corresponding sleeves on the outer tent.
- Arch and Secure Poles: Gently arch the poles and insert their ends into the eyelets or pin-and-ring systems at the base of the tent. This will raise the tent structure.
- Sudut Peg Down: Secure the four main corners of the outer tent to the ground using pegs.
- Pasang Khemah Dalaman: Go inside the outer tent and clip or toggle the inner tent into place. Ensure the inner tent floor is spread out smoothly.
- Secure Guy Ropes: Extend all guy ropes and peg them firmly into the ground at an appropriate angle (approximately 45 degrees) to provide stability against wind. Adjust tensioners as needed.
- Pelarasan Akhir: Check all zips are closed and the tent is taut and stable.

Figure 4.1: The Easy Camp Huntsville 400 tent fully pitched, showing its overall structure and guy rope setup.

Rajah 4.2: Sebelah view of the Huntsville 400 tent, illustrating the tunnel design and pole structure.
5. Arahan Operasi
- Masuk dan Keluar: The tent features a main zippered entrance. Ensure zippers are fully closed when not in use to prevent insects and weather ingress.
- Pengudaraan: Utilize the tent's ventilation points to maintain airflow and reduce condensation. Open vents during the day and close them partially at night if temperatures drop.
- Internal Space: The tent has one main room, providing ample space for 4 persons.
- Storan: Use any internal pockets or hanging points for organizing small items.

Rajah 5.1: Dalaman view of the tent showing the sleeping area partition closed, providing privacy.

Rajah 5.2: Dalaman view of the tent with the sleeping area partition open, creating a larger communal space.
6. Penyelenggaraan dan Penjagaan
- Pembersihan: Clean the tent using a soft brush or sponge and lukewarm water. Do not use detergents, bleach, or harsh chemicals as they can damage the fabric's waterproof coating. The manufacturer recommends hand washing.
- Pengeringan: Sentiasa pastikan khemah benar-benar kering sebelum mengemasnya. Iklan pembungkusanamp tent can lead to mildew, mold, and degradation of the fabric and coatings. Air dry in a shaded, well-ventilated area.
- Storan: Simpan khemah di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
- Zip: Keep zippers clean and free of dirt. Lubricate occasionally with a silicone-based spray if they become stiff.
- Pembaikan: Small tears can be repaired with a tent repair kit. For larger damage, consult a professional repair service.
7. Penyelesaian masalah
- Pemeluwapan di Dalam Khemah: This is normal and occurs when warm, moist air inside the tent meets cooler tent fabric. Increase ventilation by opening vents or doors slightly.
- Kebocoran air: Check for tears in the fabric or seams. Ensure all zippers are fully closed. If leaks persist, re-apply seam sealer to stitched areas or a waterproofing spray to the fabric.
- Poles Difficult to Assemble/Disassemble: Ensure pole sections are clean. If they stick, a small amount of silicone spray can help. Do not force them.
- Khemah Tidak Berdiri Teguh: Ensure all poles are correctly inserted and tensioned. Check that all pegs are securely driven into the ground and guy ropes are taut and properly angled.
8. Spesifikasi
| Jenama | Mudah Camp |
| Nama Model | Huntsville 400 Tienda |
| Nombor Model | 120406 |
| Penghunian | 4 orang |
| musim | 3 Musim |
| Berat Barang | 7.7 Kilogram |
| Teknologi Tahan Air | 1500 mm |
| Ciri Khas | Mudah Alih, Kalis Air |
| Material (Outer Tent) | Polyester (Rainfly: Nylon) |
| Bahan Asas | Polietilena |
| Jenis Bahan Tiang | aluminium |
| warna | Hitam |
| Dimensi Item (LxWxH) | 55.12 x 39.37 x 80.71 inci |
| Ketinggian Maksimum | 100 Sentimeter |
| Masa Perhimpunan | 5 minit |
| Bilangan Bilik | 1 |
9. Waranti dan Sokongan
For information regarding warranty coverage, product support, or spare parts, please refer to the original purchase documentation or visit the official Easy Camp weblaman web. Butiran hubungan untuk khidmat pelanggan biasanya boleh didapati di laman web pengilang webtapak atau pada resit pembelian anda.
It is recommended to register your product, if applicable, to receive updates and support.





