1. Pengenalan
Thank you for choosing the LUTEC Polo LED Outdoor Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Maklumat Keselamatan
- Keselamatan Elektrik: Installation must be performed by a qualified electrician in accordance with all local and national wiring regulations. Ensure the power supply is disconnected at the main circuit breaker before commencing any installation or maintenance work.
- Voltage: This fixture operates on 230 Volts (AC). Verify your power supply matches this requirement.
- Kelas Perlindungan: This product is Class I, meaning it must be earthed.
- Penilaian IP: The fixture has an IP54 rating, indicating protection against dust ingress and splashing water from any direction. It is suitable for outdoor use but should not be submerged.
- Pengendalian: Do not handle the fixture with wet hands. Avoid touching the LED light source directly when illuminated.
- kerosakan: Do not use the fixture if any part is damaged. Contact customer support for replacement parts.
3. Kandungan Pakej
Please check that all components are present before installation:
- 1x LUTEC Polo LED Outdoor Wall Light (Model 5205702118)
- Aksesori pemasangan (skru, palam dinding)
- Manual Arahan
4. Persediaan dan Pemasangan
Ikuti langkah ini untuk pemasangan yang betul. Adalah disyorkan untuk mempunyai dua orang untuk pemasangan.
- Sediakan Kawasan Pemasangan: Choose a suitable location on an exterior wall. The recommended mounting height for optimal motion sensor performance is 2.5 meters. Ensure the power supply is turned off at the main circuit breaker.
- Tandakan Titik Penggerudian: Pegang pendakap pelekap pada dinding pada ketinggian pemasangan yang diingini. Gunakan pensel untuk menandakan titik penggerudian.
- Lubang gerudi: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs.
- Pendakap Pemasangan Selamat: Attach the mounting bracket to the wall using the provided screws. Ensure it is firmly secured.
- Sambungan Elektrik: Connect the electrical wires from your mains supply to the terminal block on the fixture. Ensure correct polarity (Live, Neutral, Earth) and secure all connections.
- Pasang Lekapan: Carefully attach the light fixture to the mounting bracket, ensuring all wires are tucked away safely and not pinched. Secure the fixture with any retaining screws.
- Pulihkan Kuasa: Once the fixture is securely mounted and all connections are checked, restore power at the main circuit breaker.
Rajah 1: Depan view of the LUTEC Polo LED Outdoor Wall Light, showcasing its modern anthracite finish and circular design.
Figure 2: The LUTEC Polo LED Outdoor Wall Light installed on an exterior brick wall, demonstrating its appearance when illuminated.
Figure 3: A wider shot of the LUTEC Polo LED Outdoor Wall Light installed on an exterior wall, providing ambient lighting to the area.
5. Arahan Operasi
The LUTEC Polo LED Outdoor Wall Light is designed for automatic operation thanks to its integrated motion sensor. Once installed and powered, the light will activate based on the motion sensor settings.
6. Motion Sensor Settings
The integrated motion sensor allows for customization of detection parameters. Adjustments are typically made via small dials or switches located on the sensor unit itself (refer to Figure 4 for sensor location). The specific adjustment method may vary; consult the detailed diagram or markings on the sensor.
- Sudut Pengesanan: The sensor has a 180-degree detection angle.
- Julat Pengesanan: Adjustable from 0 to 10 meters (when mounted at 2.5 meters height).
- Timer (Illumination Duration): Adjustable from 10 seconds up to 10 minutes. This controls how long the light stays on after motion is detected.
- Light Sensitivity (LUX): Adjustable to 10 lux. This setting determines the ambient light level at which the sensor becomes active. For example, at 10 lux, the light will only activate when it is relatively dark.
Rajah 4: Jarak dekat view of the integrated motion sensor located at the bottom of the LUTEC Polo LED Outdoor Wall Light. Adjustment dials are typically found here.
7. Penyelenggaraan
- Pembersihan: Untuk membersihkan lekapan, pastikan kuasa dimatikan. Gunakan yang lembut, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan kemasan atau komponen elektrik.
- LED: The integrated LED light source is not user-replaceable. If the LED fails, the entire fixture may need to be replaced.
- Pemeriksaan: Periksa lekapan secara berkala untuk sebarang tanda kerosakan, sambungan longgar atau haus.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tiada bekalan kuasa. Sensor sensitivity too low (too bright). Pendawaian yang rosak. | Periksa pemutus litar. Adjust LUX setting on sensor. Rujuk juruelektrik bertauliah untuk memeriksa pendawaian. |
| Lampu kekal menyala secara berterusan. | Gerakan berterusan dikesan. Timer setting too long. Kerosakan sensor. | Check for obstructions or constant movement in detection area. Adjust timer setting to a shorter duration. Hubungi sokongan pelanggan. |
| Cahaya berkelip atau berkelip. | Bekalan kuasa tidak stabil. Sambungan pendawaian longgar. Pemacu LED yang rosak. | Rujuk juruelektrik untuk memeriksa bekalan kuasa. Pastikan semua sambungan pendawaian kukuh (matikan kuasa terlebih dahulu). Hubungi sokongan pelanggan. |
| Penderia gerakan tidak mengesan. | Sensor terhalang. Tetapan julat terlalu rendah. Mounting height incorrect. | Clear any obstructions in front of the sensor. Adjust detection range setting. Ensure mounting height is around 2.5 meters. |
9. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | LITEC |
| Nombor Model | 5205702118 |
| bahan | aluminium |
| warna | Antrasit |
| Dimensi (L x W x H) | 16.25 x 18.06 x 16.45 cm |
| Berat badan | 600 g |
| Sumber Kuasa | AC (Arus Ulang-alik) |
| Voltage | 230 Volt |
| Wattage | 16.1 Watt |
| Fluks Bercahaya | 1100 Lumen |
| Suhu Warna | 3000 K (Putih Hangat) |
| Ciri Khas | Penderia Pergerakan |
| Sudut Penderia Pergerakan | 180 darjah |
| Julat Penderia Pergerakan | 0-10 meters (at 2.5m mounting height) |
| Tetapan Pemasa | 10 saat hingga 10 minit |
| Kepekaan Cahaya | 10 lux |
| Penarafan IP | IP54 |
| Kelas Kecekapan Tenaga | F |
Figure 5: Dimensions of the LUTEC Polo LED Outdoor Wall Light (Height: 16.4 cm, Width: 16.2 cm, Depth: 18 cm).
Figure 6: Energy efficiency label for the LUTEC Polo LED Outdoor Wall Light, showing an F rating and 17 kWh/1000h consumption. For more details, visit the Pangkalan data EPREL.
Figure 7: Product data sheet in German, detailing technical specifications and energy consumption for the LUTEC Polo LED Outdoor Wall Light.
10. Waranti dan Sokongan
LUTEC products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official LUTEC website. For technical support or inquiries, please contact your retailer or LUTEC customer service.
