Manual Pengguna Kunci Pintu Masuk Tanpa Kunci Amazon Basics Deadbolt

pengenalan

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Amazon Basics Keyless Entry Door Lock Deadbolt. Designed for convenience and security, this electronic keypad deadbolt offers keyless access with customizable security codes and an automatic locking feature. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Electronic Keypad Deadbolt Assembly (Exterior and Interior Units)
• Mekanisme Selak
• Pukulan Pukulan
• Pek skru
• Keys (for traditional key option)
• Templat Pemasangan

The image above displays the complete set of parts you should find in your product package, including the electronic keypad unit, the interior deadbolt assembly, the latch, strike plate, screws, and traditional keys.

Persediaan

Sebelum Pemasangan

• Ensure your door thickness is between 1-3/8 to 1-3/4 inches (35mm to 44mm).
• Verify the backset (distance from door edge to center of bore hole) is either 2-3/8 inches (60mm) or 2-3/4 inches (70mm).
• Prepare the necessary tools: Phillips head screwdriver, tape measure, pencil.
• The lock requires 4 AA batteries (not included). Install fresh batteries before final assembly.

Langkah Pemasangan

Follow these general steps for installation. For detailed, step-by-step instructions, refer to the included printed manual or the official Waranti (PDF) document which often contains installation guides.

1. Sediakan Pintu: Use the provided installation template to mark and drill holes if your door is not pre-drilled. Ensure the correct backset is selected.



The template provides clear markings for drilling holes, ensuring proper alignment for the deadbolt mechanism and keypad. It supports both 60mm and 70mm backsets.

2. Pasang Selak: Insert the latch into the door edge, ensuring the correct orientation for your door swing. Secure it with screws.
3. Pasang Perhimpunan Luaran: Place the exterior keypad assembly onto the door, aligning the spindle through the latch.
4. Pasang Plat Pemasangan Dalaman: Secure the interior mounting plate to the exterior assembly using screws, ensuring it is flush against the door.
5. Pasang Perhimpunan Dalaman: Sambungkan kabel dari pemasangan luar ke pemasangan dalaman. Pasangkan pemasangan dalaman pada plat pelekap.



This image shows the electronic keypad deadbolt installed on the exterior side of a door, ready for operation. The matte black finish blends seamlessly with the door.



Bahagian view illustrates how the deadbolt integrates with the door frame, providing a secure locking mechanism. The internal components are neatly concealed.

6. Pasang Bateri: Remove the battery cover on the interior assembly and insert 4 new AA batteries, observing polarity. Replace the cover.
7. Lakukan Proses Penyerahan Pintu: This step calibrates the lock to your door's orientation. Follow the specific instructions in your printed manual for this crucial step.

Arahan Operasi

Kod Pengguna Pengaturcaraan

Your deadbolt comes with a default programming code. You will use this code to set up to 6 unique user codes for family members or temporary single-use codes for guests. Refer to your printed manual for the exact sequence of button presses to add, delete, or modify user codes.

Mengunci dan Membuka Kunci

The lock can be operated using the keypad or a traditional key.

• Untuk mengunci: Tekan ke Kunci button (top right button with lock icon) on the keypad. The deadbolt will extend.
• Untuk Membuka Kunci: Enter your valid user code, then press the Buka kunci button (top left button with unlock icon). The deadbolt will retract.
• Penguncian automatik: The deadbolt features an automatic locking function, which can be set to engage 10 to 99 seconds after entry. This provides added peace of mind, ensuring your door is always secured.
• Operasi Manual: From the interior, the deadbolt can be manually locked or unlocked using the thumb turn. From the exterior, a traditional key can be used as a backup.

The keypad features illuminated numbers for easy visibility in low light conditions, along with dedicated lock and unlock buttons at the top. The traditional keyhole is located below the keypad.

Penyelenggaraan

Penggantian Bateri

The electronic deadbolt is powered by 4 AA batteries. When the batteries are low, the lock may emit a warning sound or the keypad lights may flash. To replace the batteries:

1. Remove the battery cover located on the interior side of the deadbolt assembly. This cover typically slides upwards or detaches with a gentle pull.
2. Keluarkan bateri lama dengan berhati-hati.
3. Masukkan 4 bateri AA baharu, pastikan kekutuban yang betul (+/-).
4. Replace the battery cover, making sure it clicks securely into place.

Regularly check battery levels to ensure uninterrupted operation. High usage may require more frequent battery changes.

Pembersihan

Bersihkan pad kekunci dan kunci badan dengan kain lembut,amp kain. Elakkan menggunakan pembersih atau pelarut yang melelas, kerana ini boleh merosakkan kemasan dan komponen elektronik.

Menyelesaikan masalah

If you encounter issues with your Amazon Basics Keyless Entry Door Lock Deadbolt, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact Amazon Basics customer support for further assistance.

Spesifikasi

Waranti dan Sokongan

For warranty information regarding your Amazon Basics Keyless Entry Door Lock Deadbolt, please refer to the official warranty document provided with your product or available online:

Muat turun Waranti (PDF)

For additional support, troubleshooting assistance, or to inquire about replacement parts, please visit the Kedai Asas Amazon atau hubungi khidmat pelanggan Amazon secara langsung.