Sinotimer Digital Programmable Timer TM618N-2 User Manual

1. Produk Lebihview

The Sinotimer TM618N-2 is a versatile 7-day weekly digital programmable timer designed for automated control of electrical equipment. It allows users to set specific daily or weekly schedules for turning devices on and off, ensuring efficient energy management and convenience. This timer is suitable for a wide range of applications, including controlling lighting, heating, ventilation, and other electrical appliances.

Rajah 1: Depan view of the Sinotimer TM618N-2 Digital Timer, showing the display and control buttons.

2. Ciri-ciri Utama

• Boleh Diprogram Mingguan: Allows up to 16 ON/OFF programs per day or week.
• Pelbagai fungsi: Includes Clock display, Timer, Countdown, Automatic weekly time deviation correction, and Sleep mode.
• Kapasiti Tinggi: Menyokong 16 Amp / 220 Volt AC loads.
• Lebar Voltage Keserasian: Operates with 220V, 230V, 240V AC.
• Bateri Terbina dalam: Mengekalkan tetapan semasa kuasa outages (Lithium battery type).
• Aplikasi Serbaguna: Ideal for controlling dryers, defrosting equipment, swimming pool pumps, gates, lighting, and more.

3. Spesifikasi

4. Pemasangan

Notis Keselamatan Penting: Installation should only be performed by a qualified electrician. Ensure power is disconnected before attempting any wiring.

1. Pemasangan: The TM618N-2 is designed for DIN rail mounting or screw mounting. Secure the timer in a suitable electrical enclosure.
2. Pendawaian: Refer to the wiring diagram on the back of the unit.
   

   Rajah 2: Belakang view of the Sinotimer TM618N-2, showing input/output terminals and wiring diagram.

   • Input (Terminals 1 & 2): Connect your 200-250VAC power supply to these terminals.
   • Output (Terminals 3, 4, & 5):
     • Terminal 3: Common (COM)
     • Terminal 4: Normally Open (NO) - Connect your load here for switched power.
     • Terminal 5: Normally Closed (NC) - (Less commonly used for timer applications, but available).
3. Hidupkan kuasa: Once wiring is complete and secure, restore power to the circuit. The timer display should illuminate.

Figure 3: Technical drawing showing the dimensions of the Sinotimer TM618N-2 timer.

5. Arahan Operasi

5.1. Fungsi Butang

• JAM: Digunakan untuk menetapkan waktu dan hari semasa.
• PROG: Enters/exits programming mode for ON/OFF schedules.
• MINGGU: Selects the day(s) of the week during time or program setting.
• JAM: Adjusts the hour during time or program setting.
• MIN: Adjusts the minute during time or program setting.
• INGAT SEMULA: Recalls or cancels a program setting.
• MANUAL: Manually overrides the timer's current state (ON/AUTO/OFF).
• R (Tetapkan Semula): Small button (requires a pointed object) to reset the timer to factory defaults.

5.2. Menetapkan Waktu dan Hari Semasa

1. Tekan dan tahan butang JAM butang.
2. Sambil pegang JAM, tekan MINGGU to set the current day (MO, TU, WE, TH, FR, SA, SU).
3. Sambil pegang JAM, tekan JAM untuk menetapkan jam semasa.
4. Sambil pegang JAM, tekan MIN untuk menetapkan minit semasa.
5. Lepaskan JAM butang untuk menyimpan tetapan.

5.3. Programming ON/OFF Schedules

The timer supports up to 16 ON and 16 OFF programs. Each program can be set for a specific day or group of days.

1. Tekan ke PROG butang sekali. Paparan akan menunjukkan "1 HIDUP".
2. Tekan MINGGU repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; etc.).
3. Tekan JAM untuk menetapkan jam ON yang diingini.
4. Tekan MIN untuk menetapkan minit ON yang diingini.
5. Tekan PROG sekali lagi. Paparan akan menunjukkan "1 OFF".
6. Repeat steps 2-4 to set the desired OFF time for the first program.
7. Tekan PROG to move to the next program ("2 ON", "2 OFF", etc.) and repeat the process for up to 16 programs.
8. Untuk keluar dari mod pengaturcaraan dan menyimpan tetapan, tekan butang JAM butang.

5.4. Penggantian Manual

Tekan ke MANUAL button to cycle through the output modes:

• ON: Output sentiasa HIDUP, mengabaikan program.
• AUTO: Output follows the programmed schedules.
• MATI: Output sentiasa MATI, mengabaikan program.

Pastikan pemasa berada dalam keadaan AUTO mode for programmed operation.

5.5. Menetapkan Semula Pemasa

To clear all settings and return the timer to its factory default state, insert a pointed object (like a paperclip) into the small R (Reset) hole and press gently.

6. Penyelenggaraan

The Sinotimer TM618N-2 requires minimal maintenance.

• Pastikan peranti bersih dan bebas daripada habuk. Gunakan kain lembut dan kering untuk pembersihan.
• Jangan gunakan pembersih atau pelarut yang melelas.
• Ensure the timer is installed in a dry environment, away from direct moisture or extreme temperatures.
• The internal battery is designed for long life and is not user-replaceable. If the display goes blank or settings are not retained after a power outage, the battery may need professional service.

7. Penyelesaian masalah

8. Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan teknikal, sila rujuk dokumentasi yang disediakan bersama pembelian anda atau hubungi peruncit anda. Simpan bukti pembelian anda untuk tuntutan jaminan.

Manufacturer: Sinotimer