TecTake Metal Office Cabinet with Lock

1. Pengenalan

Thank you for choosing the TecTake Metal Office Cabinet. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new cabinet. Please read these instructions carefully before beginning assembly and retain them for future reference.

Figure 1: TecTake Metal Office Cabinet with doors open, showcasinkeupayaan storannya.

2. Maklumat Keselamatan

Sila patuhi garis panduan keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada produk:

• Keep keys in a secure location and do not leave the cabinet unlocked when unattended.
• Exercise caution to avoid pinching fingers in the hinges of the swing doors during use.
• Ensure the cabinet is assembled on a flat, stable surface to prevent tipping.
• Do not exceed the maximum weight capacity per shelf (40 kg) to maintain stability and prevent structural damage.
• Jauhkan bahagian kecil dan bahan pembungkus daripada kanak-kanak untuk mengelakkan bahaya tercekik.

3. Kandungan Pakej

Before assembly, verify that all components are present and undamaged. The package should contain:

• Panel kabinet (sisi, atas, bawah, belakang, pintu)
• Adjustable shelves (quantity: 3)
• Drawer components (quantity: 2 sets)
• Lock mechanisms and keys (8 keys total, 2 per lock)
• Assembly hardware (screws, bolts, nuts, shelf pins)
• Rubber buffers for silent door operation
• Manual arahan (dokumen ini)

Jika mana-mana bahagian hilang atau rosak, sila hubungi khidmat pelanggan sebelum meneruskan pemasangan.

4. Arahan Perhimpunan

Assembly requires careful attention to detail. It is recommended to have two people for assembly. A Phillips head screwdriver is the only tool required. Avoid using power drills, as overtightening can damage the metal.

4.1 Persediaan

1. Kosongkan kawasan yang luas, bersih dan rata untuk pemasangan.
2. Unpack all components and lay them out, identifying each part according to the provided parts list (if separate from this manual).
3. Ensure all hardware is sorted and easily accessible.

4.2 Perhimpunan Langkah demi Langkah

1. Pasang Bingkai: Begin by connecting the side panels to the base and top panels using the provided screws. Ensure all connections are secure but do not overtighten until the entire frame is upright.
2. Pasang Panel Belakang: Slide or attach the back panels into the designated grooves or screw points.
3. Pasang Laci: Construct the two drawers. Pay close attention to the orientation of the drawer slides and the central support for the drawer mechanism. Incorrect orientation can prevent drawers and doors from closing properly.
   

   Figure 2: Detail of adjustable shelves, drawer, and lock mechanism.

4. Sisipkan Laci: Carefully slide the assembled drawers into their respective compartments. Test their movement.
5. Pasang Pintu: Mount the four swing doors to the cabinet frame using the hinges. Ensure the rubber buffers are placed to allow for silent closing. Adjust hinges if necessary for proper alignment.
6. Install Locks: Secure the cylinder locks into the doors. Each lock comes with two keys. Test all locks to ensure they function correctly.
7. Letakkan Rak Boleh Laras: Insert the shelf pins into the desired height slots. Place the shelves onto the pins. The shelves are adjustable to accommodate various item sizes.
   

   Figure 3: Detail of adjustable shelf brackets.

8. Semakan Akhir: Verify all screws are tightened, doors open and close smoothly, and drawers slide without obstruction.

For visual guidance, refer to the assembly diagrams provided in the separate assembly manual (if included) or the product images showing the assembled unit.

5. Operasi

5.1 Pintu

The cabinet features four swing doors. To open, turn the key in the lock and pull the handle. To close, push the door firmly until it engages with the magnetic catch or lock mechanism, then turn the key to secure. The rubber buffers ensure quiet operation.

5.2 Laci

The two drawers are designed for smooth operation. Pull the handle to open and push to close. Each drawer has its own lock for securing contents. Insert the key and turn to lock or unlock.

5.3 Para boleh laras

The three adjustable shelves allow for flexible storage configurations. To adjust a shelf, remove all items from it, lift the shelf, and reposition the shelf pins into the desired slots on the cabinet sides. Ensure all four pins are securely seated before placing items back on the shelf.

Figure 4: Key features of the cabinet, including adjustable storage and secure locking.

6. Penyelenggaraan

To ensure the longevity and appearance of your TecTake Metal Office Cabinet, follow these simple maintenance guidelines:

• Pembersihan: Lap semua permukaan dengan kain lembut,amp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners or harsh chemicals, as these can damage the powder-coated finish. Dry thoroughly after cleaning.
• Locks and Hinges: Periodically check the locks and hinges for smooth operation. If they become stiff, a small amount of silicone-based lubricant can be applied.
• Kestabilan: Regularly check that all screws and connections remain tight. Retighten if necessary to maintain the cabinet's stability.
• Pengagihan Berat: Distribute weight evenly across shelves and drawers to prevent warping or instability.

7. Penyelesaian masalah

Jika anda menghadapi masalah dengan kabinet anda, rujuk kepada masalah dan penyelesaian biasa berikut:

8. Spesifikasi

Key technical specifications for the TecTake Metal Office Cabinet:

Figure 5: Dimensions of the TecTake Metal Office Cabinet.

9. Waranti dan Sokongan

Specific warranty information for this product is not provided in the available data. Please refer to your purchase documentation or contact the retailer/manufacturer directly for details regarding warranty coverage and customer support.

For technical assistance or inquiries about replacement parts, please contact TecTake customer service through their official webtapak atau maklumat hubungan yang diberikan bersama pembelian anda.