pengenalan
This manual provides detailed instructions for the setup, operation, and maintenance of your 3nStar SC402BT Wireless 2D Barcode Scanner. The SC402BT is designed for efficient and reliable data collection, supporting both 1D and 2D barcodes, including those displayed on mobile devices. Its wireless capabilities offer flexibility and ease of use in various environments.
Figure 1: 3nStar SC402BT Wireless 2D Barcode Scanner and USB Receiver.
Kandungan Pakej
- 3nStar SC402BT Wireless 2D Barcode Scanner
- Penerima USB
- Kabel Pengecas USB
- Manual Pengguna (dokumen ini)
Persediaan
1. Mengecas Pengimbas
Before initial use, ensure the scanner is fully charged. Connect the USB charging cable to the scanner's charging port and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator light will show the charging status.
2. Menyambungkan Penerima USB
The SC402BT connects wirelessly via its dedicated USB receiver. This receiver facilitates communication within a 100-meter range.
- Insert the USB receiver into an available USB port on your computer or host device.
- Sistem akan mengesan dan memasang pemacu yang diperlukan secara automatik. Ini mungkin mengambil masa beberapa saat.
Figure 2: USB Receiver connection point.
3. Pairing the Scanner with the Receiver
The scanner and receiver are typically pre-paired. If pairing is lost or you are connecting a new scanner to an existing receiver, follow these steps:
- Ensure the USB receiver is plugged into your computer.
- Turn on the barcode scanner.
- Scan the specific pairing barcode provided in the quick start guide or on a dedicated pairing card (if applicable). Refer to your product's specific pairing barcode for successful connection.
- A successful pairing will be indicated by an audible beep from the scanner and/or a change in the indicator light status.
Note: One receiver can support up to 99 scanners, making it suitable for multi-scanner environments.
Mengendalikan Pengimbas
1. Basic Scanning Operation
Untuk mengimbas kod bar:
- Halakan tetingkap pengimbas pada kod bar yang ingin anda imbas.
- Press and hold the trigger button. A red aiming line or illumination will appear.
- Position the aiming line across the entire barcode.
- Once the barcode is successfully read, the scanner will emit a beep and the data will be transmitted to your connected device.
Rajah 3: Depan view of the scanner, showing the scanning window.
2. Scanning 2D and Mobile Barcodes
The SC402BT is capable of reading various 2D barcodes and barcodes displayed on mobile phone screens, including coupons, mobile tickets, and digital wallets. For optimal performance when scanning from screens, ensure the screen brightness is adequate and avoid glare.
3. Komunikasi Tanpa Wayar
The scanner maintains a stable wireless connection with the USB receiver up to 100 meters in open areas. Obstacles such as walls or other electronic devices may reduce this range. If the scanner moves out of range, it will store scanned data in its internal memory and transmit it once the connection is re-established.
Penyelenggaraan
1. Membersihkan Pengimbas
To ensure optimal scanning performance, keep the scanner's window clean. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials, as these can damage the scanning window.
2. Penjagaan Bateri
- Recharge the battery when the low battery indicator is active.
- Elakkan menyahcas sepenuhnya bateri dengan kerap untuk memanjangkan jangka hayatnya.
- Simpan pengimbas di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengimbas tidak membaca kod bar. | Barcode damaged or poorly printed; scanning window dirty; scanner out of range; scanner not paired. | Try scanning a different barcode; clean the scanning window; move closer to the receiver; re-pair the scanner. |
| Tiada data dihantar ke komputer. | USB receiver not properly connected; scanner not paired; software issue on host device. | Ensure receiver is firmly plugged in; re-pair scanner; check host device's input settings or restart application. |
| Scanner not turning on. | Bateri hampir habis atau habis. | Charge the scanner fully. |
| Julat tanpa wayar yang pendek. | Environmental interference; physical obstructions. | Reduce interference from other wireless devices; ensure clear line of sight between scanner and receiver. |
Spesifikasi
- model: SC402BT
- Jenama: 3nStar
- Dimensi Produk: 2.68 x 3.86 x 6.69 inci
- Berat Barang: 10.9 auns
- Teknologi Ketersambungan: 2.4GHz Wireless (USB Receiver), Bluetooth
- Kadar Imbasan: 30 bingkai sesaat
- Sumber Kuasa: Dikuasakan Bateri
- Peranti Serasi: Desktop, Komputer riba
- Jarak Komunikasi: Sehingga 100 meter (kawasan terbuka)
- Keserasian Kod Bar: 1D and 2D barcodes (including mobile phone screens)
Waranti dan Sokongan
For warranty information and technical support, please refer to the warranty card included with your product or visit the official 3nStar webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
Pengeluar: 3nStar
Webtapak: Visit the 3nStar Store on Amazon
