1. Pengenalan
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Produk Lebihview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Resolusi Ultra Tinggi: Captures 4K video and 32MP still images.
- Penglihatan Malam: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Fast Trigger Time: 0.1-second trigger speed to capture fast-moving subjects.
- Bidang Luas View: 120° wide-angle lens for comprehensive monitoring.
- Reka bentuk tahan lasak: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Gerakan Diaktifkan: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Persediaan
- Pasang Bateri: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- Masukkan Kad SD: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Hidupkan kuasa: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Memasang Kamera:
- Gunakan tali pelekap yang disertakan untuk memasang kamera pada pokok atau tiang. Masukkan tali melalui slot di bahagian belakang kamera dan ketatkan.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Arahan Operasi
4.1. Pemilihan Mod
The camera has three main modes:
- MATI: Matikan kamera.
- UJIAN: Membolehkan anda view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- ON: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Tetapan | Penerangan | Nilai Disyorkan |
|---|---|---|
| Mod | Pilih Foto, Video atau Foto+Video. | Foto+Video |
| Resolusi Foto | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32MP |
| Resolusi Video | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| Kepekaan PIR | Adjust motion sensor sensitivity (High, Medium, Low). | Sederhana |
| Mencetuskan selang | Time delay between detections (e.g., 5s, 10s, 30s). | 10 Saat |
| Selang Masa | Tangkap imej pada selang masa yang ditetapkan tanpa mengira pergerakan. | Mati |
| Tarikh & Masa | Tetapkan tarikh dan masa semasa. | semasa |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
Gambar 4.6: Cthample of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Penyelenggaraan
- Pembersihan: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Penggantian Bateri: Replace all batteries at the same time. Do not mix old and new batteries or different types of batteries.
- Pengurusan Kad SD: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- Storan: Apabila tidak digunakan untuk tempoh yang lama, keluarkan bateri dan simpan kamera di tempat yang sejuk dan kering.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kamera tidak dihidupkan | Low or dead batteries; incorrect battery polarity; faulty SD card. | Replace batteries; check polarity; remove SD card and try powering on. |
| Kualiti imej/video yang lemah | Kanta kotor; keadaan cahaya malap; tetapan resolusi yang salah. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Camera not triggering | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| Kesalahan kad SD | Kad SD penuh; kad SD tidak serasi; kad SD rosak. | Padam files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Resolusi Foto | Sehingga 32MP |
| Resolusi Video | Sehingga 4K |
| Kecepatan Pencetus | 0.1 saat |
| Julat Penglihatan Malam | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| Julat Pengesanan PIR | Day: 80ft (24m), Night: 65ft (20m) |
| Bidang View | 120° Wide Lens |
| Penilaian Kalis Air | IP66 |
| Suhu Operasi | -22°F hingga 158°F (-30°C hingga 70°C) |
| Penyimpanan | SD Card (up to 256GB, Class 10 or higher) |
| Bekalan Kuasa | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Paparan | LCD 2.4'' |
8. Waranti dan Sokongan
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri webtapak.
Sila simpan bukti pembelian anda untuk tuntutan waranti.
