pengenalan
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your KERDOM 968ZK Ergonomic Office Chair. Please read this manual carefully before use to ensure proper assembly and safe operation. This chair is designed to provide comfortable support with its ergonomic features, breathable mesh, and multiple adjustment options.
Image: The KERDOM 968ZK Ergonomic Office Chair in a typical office setting, showcasing its design and features including the rollerblade wheels.
Maklumat Keselamatan
- Pastikan semua komponen diikat dengan selamat sebelum digunakan.
- Jangan berdiri di atas kerusi.
- Jangan gunakan kerusi jika mana-mana bahagiannya rosak atau hilang.
- Kapasiti berat maksimum: 150 kg (330 lbs). Jangan melebihi had ini.
- Jauhkan kanak-kanak daripada bahagian yang bergerak semasa pelarasan.
Kandungan Pakej
Sebelum pemasangan, sahkan bahawa semua bahagian ada dan tidak rosak. Jika mana-mana bahagian hilang atau rosak, sila hubungi khidmat pelanggan.
- Pemasangan Sandaran
- Perhimpunan Kusyen Tempat Duduk
- Tempat letak tangan (2)
- Tempat letak kepala
- Silinder Angkat Gas
- Pangkalan Bintang
- Kastor (5)
- Plat Mekanisme
- Kit Perkakasan (skru, pencuci, sepana Allen)
Persediaan dan Perhimpunan
Follow these steps to assemble your KERDOM 968ZK office chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Pasang Kastor ke Pangkalan: Masukkan lima roda ke dalam lubang di hujung setiap kaki tapak bintang. Tolak dengan kuat sehingga ia klik pada tempatnya.
- Masukkan Pengangkat Gas: Letakkan silinder pengangkat gas ke dalam lubang tengah tapak bintang.
- Pasang Plat Mekanisme pada Tempat Duduk: Align the mechanism plate with the screw holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws using the provided Allen wrench.
- Pasangkan Tempat Letak Tangan pada Tempat Duduk: Pasangkan tempat letak tangan pada sisi kusyen tempat duduk menggunakan skru yang ditetapkan.
- Pasang Sandaran Belakang ke Tempat Duduk: Connect the backrest assembly to the mechanism plate and seat cushion using the appropriate screws.
- Pasang Sandaran Kepala: Luncurkan penyandar kepala ke dalam slot yang ditetapkan di bahagian atas penyandar belakang.
- Sambungkan Pemasangan Tempat Duduk ke Lif Gas: Letakkan tempat duduk dan penyandar yang telah dipasang dengan berhati-hati pada silinder pengangkat gas, pastikan ia berada di tengah dan stabil.
Image: Illustration of the chair's robust components including the high-quality pneumatic rod, steel base, and mute nylon wheels, essential for assembly.
Image: Detail of the strong wheelbase and smooth blade wheels, highlighting their design for stability and floor protection.
Arahan Operasi dan Pelarasan
Your KERDOM 968ZK chair offers several adjustable features to customize your seating experience for optimal comfort and ergonomic support.
1. Pelarasan Ketinggian Tempat Duduk
To adjust the seat height, pull the lever located under the right side of the seat upwards. While holding the lever, stand up to raise the seat or remain seated and apply weight to lower it. Release the lever to lock the height.
2. Backrest Recline and Tilt Lock
The backrest can recline between 90° and 120°. Pull out the lever on the left side of the seat to unlock the rocking mode. Push the lever in to lock the backrest at your desired angle.
Image: Visual representation of the adjustable headrest and reclining backrest, showing the range of motion from 90 to 135 degrees and 30 degrees of headrest adjustment.
Image: Diagram illustrating how to adjust the tilting tension. Pull out the handle to unlock rocking mode, then turn the knob clockwise to loosen or counter-clockwise to tighten the tension.
3. Pelarasan Tempat Letak Tangan
The armrests are 3D adjustable. They can be moved up and down, forward and backward, and rotated inwards or outwards to suit your preference and save space when not in use (90° flip-up capability).
4. Pelarasan Tempat Letak Kepala
The headrest is adjustable in height and angle (up to 30° rotation) to provide optimal support for your cervical spine.
5. Sokongan Lumbar
The chair features an adjustable lumbar support designed to conform to the natural curve of your lower back, providing targeted support.
Image: Diagram highlighting the three key ergonomic support points of the chair: cervical spine, shoulder and spine, and lumbar spine.
Image: Illustration of the chair's ergonomic design, showing how it supports the human curve of the back and features a rotatably liftable headrest.
Penyelenggaraan
To ensure the longevity and appearance of your KERDOM 968ZK office chair, follow these simple maintenance guidelines:
- Pembersihan: Wipe the mesh and plastic surfaces with a soft, damp kain. Untuk kotoran degil, gunakan larutan sabun lembut dan kemudian lap dengan kain bersih,amp kain. Elakkan bahan kimia yang keras atau pembersih yang kasar.
- Pemeriksaan: Periksa semua skru dan bolt secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
- Kastor: Pastikan roda roda bersih daripada rambut dan serpihan untuk memastikan pergerakan yang lancar.
- Elakkan Cahaya Matahari Terus: Prolonged exposure to direct sunlight can cause the mesh and plastic to fade or degrade.
Menyelesaikan masalah
Jika anda menghadapi sebarang masalah dengan kerusi anda, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kerusi tidak melaraskan ketinggian | Gas lift lever not engaged or gas lift faulty. | Ensure the lever is fully pulled up. If the issue persists, the gas lift may need replacement. |
| Kerusi bergoyang atau tidak stabil | Skru longgar atau pemasangan tidak rata. | Periksa dan ketatkan semua skru pemasangan. Pastikan kerusi berada di atas permukaan yang rata. |
| Kastor tidak bergolek dengan lancar | Serpihan terperangkap dalam kastor. | Clean any hair or debris from the caster wheels. |
| Sandaran belakang tidak bersandar atau berkunci | Recline lever not engaged or mechanism stuck. | Pull out the recline lever to unlock. Push in to lock. Check for obstructions in the mechanism. |
Spesifikasi
Image: Detailed diagram showing the dimensions of the KERDOM 968ZK Ergonomic Office Chair.
| Ciri | Perincian |
|---|---|
| Nombor Model | 968ZK |
| Jenama | KERDOM |
| warna | Hitam |
| bahan | Polypropylene (Frame), Polyester Mesh (Backrest/Cushion Surface), High-Density Sponge (Seat Cushion) |
| Dimensi Produk (L x W x H) | 55 x 25 x 55 cm (pembungkusan) |
| Berat Barang | 17 Kilogram |
| Gaya Belakang | High-Back Mesh |
| Ciri Khas | Adjustable Armrests, Adjustable Headrest, Ergonomic Design, Adjustable Height, Adjustable Lumbar Support |
| Kapasiti Muatan | 150 kg |
| Sudut Kecondongan | 90° hingga 120° |
Waranti dan Sokongan
KERDOM provides professional after-sales service. If you encounter any defects not caused by human factors, please contact us through your purchase platform. For Amazon purchases, log in to your account, navigate to 'Your Orders', find the order number, and click 'Contact Seller'. We aim to provide effective and professional solutions within 24 hours.
