CURT Custom Wiring Harness User Manual

Produk Selesaiview

The CURT Custom Wiring Harness, Model 56467, is designed to provide a reliable electrical connection for towing applications on specific Mitsubishi Outlander vehicles. This product is engineered for a custom fit, ensuring seamless integration with your vehicle's existing wiring system.

Ciri-ciri utama termasuk:

• Quality parts: Constructed with durable components for long-lasting performance.
• Penggunaan yang mudah: Designed for straightforward operation.
• Made from quality materials: Ensures reliability and safety.
• Mudah dipasang: Engineered for a simplified installation process.

Imej: Selesaiview of the CURT Custom Wiring Harness components, including the main module, various wires, connectors, fuse holder, and zip ties.

Apa yang ada dalam Kotak

Your CURT Custom Wiring Harness package includes the following items:

• Aries Automotive 56467: T-Conn, Mitsubishi Outlander (Main Wiring Harness Module)
• Associated wiring and connectors
• Pemegang fius dan fius
• Mounting hardware (e.g., zip ties, screw)

Imej: Terperinci view of the kit contents, including the fuse, terminals, zip ties, and a circuit protection information card.

Persediaan dan Pemasangan

This wiring harness is designed for a vehicle-specific fit. While general steps are provided, always refer to the detailed instructions included with your product for precise vehicle-specific guidance. Professional installation is recommended if you are unfamiliar with automotive electrical systems.

Langkah Pemasangan Umum:

1. Sediakan Kenderaan: Ensure the vehicle is turned off and the battery is disconnected before beginning installation. Access the rear taillight assemblies.
2. Cari Titik Sambungan: The harness typically connects behind the vehicle's taillights. You may need to remove taillight assemblies to access the wiring.
3. Sambungkan Abah-abah: Plug the custom connectors from the harness into the vehicle's existing taillight wiring sockets. These are designed for a plug-and-play fit.
   

   Image: Illustrates the sealed, epoxy-filled enclosure, plug-and-play connectors, and standard trailer wiring output.

4. Pendawaian Laluan: Carefully route the wiring from the harness module to the desired location for the 4-way flat connector, typically near the trailer hitch. Ensure wiring is secured away from hot or moving parts using the provided zip ties.
   

   Image: Close-up of the 4-way flat vehicle end plug output, which connects to the trailer.

5. Sambung ke Bateri: Route the power wire (if applicable) to the vehicle's battery, connecting it through the included fuse holder. Always install the fuse as the last step.
6. Selamatkan Modul: Mount the main harness module in a dry, secure location within the vehicle's rear compartment, away from moisture and moving parts.
7. Pasang semula dan Uji: Reinstall any removed vehicle components. Reconnect the battery and test all lighting functions (turn signals, brake lights, running lights) with a trailer or trailer light tester.

Important Note on Taillight Grommets:

Some vehicle models may have rubber grommets where wires exit the taillight housing into the vehicle's trunk. If the harness wires are routed through these existing grommet holes, ensure the grommet provides a complete seal around the new wiring to prevent water intrusion into the vehicle's interior, especially during car washes or heavy rain. Modifying the grommet to accommodate the new wiring may be necessary, and proper sealing is crucial.

Image: A hand demonstrating the included dust cover for the 4-way flat connector, protecting it when not in use.

Operating the Wiring Harness

Once installed, the CURT Custom Wiring Harness provides a standard 4-way flat connector for your trailer's electrical system. This connector supplies power for your trailer's running lights, turn signals, and brake lights.

• Menyambung Treler: Align the 4-way flat connector from your vehicle's harness with the corresponding connector on your trailer and push them firmly together until they are securely seated.
• Memutuskan sambungan Treler: Grasp both ends of the connector firmly and pull them apart. Avoid pulling on the wires themselves.
• Penutup habuk: Always place the included dust cover over the vehicle's 4-way flat connector to protect it from dirt, moisture, and corrosion when not in use.

Imej: Dari dekat view of two 4-way flat connectors being connected, illustrating the standard trailer wiring output.

Penyelenggaraan

To ensure the longevity and proper function of your CURT Custom Wiring Harness, follow these maintenance guidelines:

• Pastikan Sambungan Bersih: Regularly inspect the 4-way flat connector for dirt, debris, or corrosion. Clean with a wire brush or electrical contact cleaner if necessary.
• Sapukan gris dielektrik: Apply a small amount of dielectric grease to the electrical terminals of the 4-way flat connector to protect against moisture and corrosion.
• Periksa Pendawaian: Periodically check all visible wiring for signs of wear, fraying, or damage. Ensure all connections are secure.
• Gunakan Penutup Habuk: Always use the provided dust cover when the harness is not connected to a trailer.

Menyelesaikan masalah

The CURT Custom Wiring Harness features a circuit-protected converter system designed to prevent damage from short circuits or overloads. If you experience issues, consider the following:

Circuit Protected Converter Systems:

This product has been factory tested and built to full specifications. The wiring package includes an electronic module that provides internal circuit protection.

If a short circuit or overload situation occurs in a trailer lighting circuit, the module is designed to shut the circuit down, preventing current flow until the issue is resolved.

If vehicle lamps berfungsi tetapi treler lamps are not working, shut power off to the faulted circuit for a few seconds then try the circuit again.

Jika treler lamps return to normal function, the issue has been resolved.

Jika lampnyala selama beberapa saat dan kemudian padam:

1. Periksa wayar pembumian pada kedua-dua abah-abah dan treler.
2. Check correct an overload condition (too many bulbs).

Jika litar gagal menyala:

1. Check low vehicle fuse.
2. Check cable for broken connections.
3. Check for broken bulbs.
4. Periksa wayar pembumian pada kedua-dua abah-abah dan treler.
5. Cari dan betulkan petikan pendek.

Note: Using a tester can help confirm system function. If problems persist, see your installer or corrective action. Inspect wiring and connections before towing and frequently while towing.

Image: Information card detailing the circuit protection features and troubleshooting steps for the wiring harness.

Spesifikasi

Waranti dan Sokongan

Produk ini disertakan dengan a Waranti Terhad. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official CURT webtapak.

For technical support, installation assistance, or warranty claims, please contact CURT customer service through their official channels. Always provide your product model number (56467) and purchase details when seeking support.