1. Pengenalan
This manual provides detailed instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your SUNLU T3 3D Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.
Image: The SUNLU T3 3D Printer, showcasinreka bentuknya dan sebagaiampcetak.
2. Arahan Keselamatan
Sentiasa patuhi langkah keselamatan berikut:
- Keep the printer away from flammable materials and heat sources.
- Pastikan pengudaraan yang betul semasa operasi.
- Do not touch the hot nozzle or heated bed during operation or immediately after printing.
- Always disconnect power before performing maintenance or cleaning.
- Jauhkan daripada kanak-kanak dan haiwan peliharaan.
- Sahkan bekalan kuasa voltage switch is set correctly for your region (115V or 230V) before plugging in the device. This switch is typically located near the power input.
3. Persediaan dan Pemasangan
3.1 Membongkar dan Pemeriksaan
Carefully remove all components from the packaging. Inspect for any visible damage during transit. Refer to the packing list to ensure all parts are present.
Image: A visual representation of the SUNLU T3 3D Printer's packing list, including the main unit, accessories, and tools.
3.2 Langkah Perhimpunan
The SUNLU T3 3D Printer is designed for easy assembly, typically completed in three main steps:
- Attach the gantry to the base.
- Mount the power supply unit/control box.
- Pasang pemegang kili filamen.
Pastikan semua sambungan selamat dan kabel dihalakan dengan betul.
Imej: Meletup view illustrating the simple three-step assembly of the printer.
3.3 Initial Leveling
The T3 printer features 16-point automatic leveling. This function assists in achieving an even print surface. It is recommended to perform auto-leveling before your first print and periodically thereafter.
Image: The 16-point auto-leveling system in action, ensuring a precise print surface.
4. Arahan Operasi
4.1 Pemuatan Filamen
Insert the filament into the extruder mechanism. The T3 features a double gear metal extruder for stable filament output. Ensure the filament feeds smoothly without kinks.
Image: The metal double gear extruder, designed for consistent filament feeding.
4.2 Proses Mencetak
Muatkan model 3D anda file onto the printer via the provided TF card. Select the desired file from the printer's interface. The T3 supports high-speed printing up to 250mm/s, significantly reducing print times.
Image: A visual comparison demonstrating the speed advantage of 250mm/s printing.
4.3 Ciri Pintar
- Filament Clog Detection: The printer will suspend operation and return to the origin if a clog is detected. Users can then clear the clog and resume printing.
- Filament Break Detection: The T3 detects abnormal filament feeding, such as run-out or breakage, and pauses printing to prevent print failure.
- Power Off Resume Printing: Sekiranya berlaku kuasa outage, the printer's memory function allows it to resume printing from where it left off once power is restored.
- Magnetic Build Plate: The flexible magnetic build surface allows for easy removal of finished 3D models without deformation. It also features ultra-fast heating.
Image: Flowchart demonstrating how the printer detects and handles filament clogs.
Image: Visual explanation of the power-off resume and filament outage detection features.
Image: Layers of the magnetic build plate, highlighting its flexibility and adhesion properties.
5. Penyelenggaraan
5.1 Pelarasan Ketegangan Tali Pinggang
Over time, belts may loosen, affecting print accuracy and potentially causing noise. The T3 features X-axis and Y-axis belt adjusters to maintain proper tension and printing accuracy.
Image: Instructions for adjusting the X-axis and Y-axis belts to ensure optimal tension.
5.2 Pembersihan Am
Regularly clean the print bed, nozzle, and other accessible parts to prevent debris buildup. Use appropriate tools and cleaning solutions as recommended by the manufacturer.
5.3 Hot End Maintenance
Periodically inspect the hot end assembly. Ensure all components are securely fastened and free from filament residue. If necessary, carefully disassemble and reassemble the hot end, ensuring proper seating of all parts.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No power upon startup | vol. salahtage switch setting, loose power connections, internal wiring issue. | Sahkan bekalan kuasa voltage switch (115V/230V) is correctly set. Check all power cable connections. If issues persist, contact support. |
| Filament not extruding / Clogging | Nozzle clog, tangled filament, incorrect temperature. | Utilize the printer's clog detection feature to pause and clear the nozzle. Ensure filament is untangled and loaded correctly. Verify print temperature settings. |
| Prints not adhering to bed | Uneven bed, dirty print surface, incorrect bed temperature, first layer height issues. | Perform auto-leveling. Clean the magnetic build plate. Adjust bed temperature according to filament type. Calibrate first layer height. |
| Visible ringing or ghosting on prints | Loose belts, excessive print speed/acceleration, unstable printer placement. | Adjust belt tension using the X-axis and Y-axis adjusters. Reduce print speed and acceleration settings in your slicer. Ensure the printer is on a stable surface. |
| Filament run-out or breakage during print | Empty spool, brittle filament, excessive tension. | The printer will pause automatically. Replace the filament and resume printing. Store filament properly to prevent brittleness. |
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | SUNLU T3 (Terminator 3) |
| Teknologi Percetakan | FDM (Pemodelan Pemendapan Bersatu) |
| Saiz Cetakan | 220 x 220 x 250 mm (8.66 x 8.66 x 9.84 inci) |
| Kelajuan Cetakan Maksimum | 250 mm/s |
| Dimensi Produk | 17.32 x 15.75 x 18.5 inci |
| Berat Barang | 15.98 paun (lebih kurang 7.25 kg) |
| bahan | Aluminium (bingkai) |
| warna | T3 Hitam |
| Papan induk | 32-bit silent motherboard |
| Tahap Kebisingan | Lower than 45dB (Full Silent Printing) |
| Meratakan | 16-point 3D Touch Auto Leveling |
| Extruder | Double Gear Metal Extruder |
| Bina Permukaan | Platform Magnetik Boleh Tanggal |
| Penggunaan Kuasa Dalam Mod | 360 watt |
Image: The physical dimensions of the SUNLU T3 3D Printer.
8. Maklumat Waranti
Specific warranty details are not provided in the available product information. Please refer to the official SUNLU website or contact SUNLU customer service for comprehensive warranty terms and conditions.
9. Sokongan Pelanggan
For further assistance, technical support, or inquiries, please visit the official SUNLU store or contact their customer service department.
