1. Produk Lebihview
The Rust-Oleum Varathane One-Step Stain & Polyurethane is a water-based product designed to combine the benefits of a wood stain and a protective polyurethane finish into a single application. This formulation provides a deep, rich color and durable protection for various indoor wood surfaces, eliminating the need for multiple product layers. It is suitable for use on furniture, cabinets, trim, and doors.
This image displays the product can for Varathane One Step Stain + Poly Water Based. The label clearly indicates 'One Step Stain + Poly', 'Water Based', 'Provincial' color, and 'Semi-Gloss' finish. It also highlights features like 'Rich Even Color', 'Superior Scratch Resistance', and 'Complete Project 5x Faster'.
2. Maklumat Keselamatan
Always read and follow all instructions and safety precautions on the product label before use. This product is for indoor use only.
- Ensure adequate ventilation during application and drying. Open windows and doors, or use a fan.
- Pakai peralatan pelindung diri yang sesuai, termasuk sarung tangan dan pelindung mata, untuk mengelakkan sentuhan kulit dan mata.
- Jauhkan daripada kanak-kanak dan haiwan peliharaan.
- Do not ingest. If swallowed, call a poison control center immediately.
- In case of eye contact, flush thoroughly with water for 15 minutes and seek medical attention.
- Dispose of unused product and cleaning materials according to local regulations.
3. Surface Preparation (Setup)
Proper surface preparation is crucial for optimal adhesion and finish quality.
- Kayu Baharu: Sand the bare wood surface in the direction of the grain until smooth. Begin with 120-grit sandpaper and progress to 220-grit sandpaper. Remove all sanding dust with a vacuum or a tack cloth.
- Previously Finished Wood: Ensure the surface is clean, dry, and free of wax, grease, polish, or other contaminants. Lightly sand the existing finish with 220-grit sandpaper to dull the surface and create a profile for adhesion. Remove all sanding dust. If the existing finish is peeling or severely damaged, it should be removed completely.
- keadaan: Ensure the wood is completely dry before application. Avoid applying in high humidity conditions.
4. Application Instructions (Operating)
Follow these steps for best results:
- Stir Thoroughly: Before and during use, stir the product gently but thoroughly. Do not shake, as this can introduce air bubbles.
- Kawasan Ujian: Always test the product on an inconspicuous area or scrap wood to verify color and adhesion.
- Apply First Coat: Apply a thin, even coat using a high-quality synthetic brush or foam applicator. Apply in the direction of the wood grain. Avoid over-brushing.
- Biarkan Kering: Allow the first coat to dry completely. Drying time can vary based on temperature and humidity. Refer to the 'Drying and Recoat Times' section.
- Light Sanding (Optional): For a smoother finish, lightly sand with 220-grit sandpaper between coats after the previous coat has dried. Remove all sanding dust with a tack cloth.
- Apply Additional Coats: Apply subsequent coats as needed to achieve desired color depth and protection. Typically, 2-3 coats are recommended.
5. Drying and Recoat Times
Drying times are approximate and can be affected by temperature, humidity, and film thickness.
- Touch Dry: Lebih kurang 1 jam.
- Masa Recoat: Lebih kurang 2-3 jam.
- Penggunaan Ringan: Allow 24 hours before light use.
- Penawar Penuh: Allow 3-5 days for the finish to fully cure and achieve maximum durability. Avoid placing heavy objects or covering the surface during this period.
6. Pembersihan
Clean tools and spills immediately after use.
- Clean brushes, applicators, and other equipment with soap and warm water.
- Wipe up any spills or drips with a damp cloth before the product dries.
7. Maintenance of Finished Surface
To maintain the beauty and durability of your finished wood surface:
- Bersihkan selalu dengan lembut, damp kain.
- Elakkan pembersih yang melelas atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan.
- Lindungi permukaan daripada kelembapan berlebihan dan perubahan suhu yang melampau.
- Use coasters under beverages and felt pads under furniture to prevent scratches.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kemasan / Jalur Tidak Sekata | Improper application technique, over-brushing, or uneven surface preparation. | Apply thin, even coats. Work in the direction of the grain. Ensure surface is properly sanded and clean. |
| Bubbles in Finish | Shaking the can, over-brushing, or applying too thickly. | Stir gently, do not shake. Apply thin coats. Use a high-quality applicator. |
| Masa Pengeringan Perlahan | High humidity, low temperature, or applying too thickly. | Ensure good ventilation. Apply in recommended temperature and humidity ranges. Apply thinner coats. |
| Poor Adhesion | Improper surface preparation (e.g., oily, waxy, or unsanded surface). | Thoroughly clean and sand the surface as per preparation instructions. |
9. Spesifikasi Produk
- Jenama: Rust-Oleum
- Nama Model: One Step Stain & Polyurethane, Water-Based Semi Gloss
- Nombor Model Item: 336359
- Bahan: Polyurethane, Water Based
- warna: Wilayah
- Selesai: Separuh Berkilat
- Syor Permukaan: Cabinets, Door, Furniture, Wood
- Dimensi Pakej: 4.8 x 4.33 x 4.21 inci
- Berat Barang: 2.39 paun
- ASIN: B0B3F5NJ43
- Tarikh Mula-mula Tersedia: 7 Jun 2022
10. Maklumat Sokongan
For further assistance, technical support, or product inquiries, please contact Rust-Oleum customer service. Refer to the product packaging for the most current contact information or visit the official Rust-Oleum webtapak.
Pengeluar: Rust-Oleum
Webtapak: www.rustoleum.com (Sila semak pegawai website for specific contact details and regional support.)