pengenalan
Thank you for choosing the VOYSIGN Outdoor Steel Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining table. Please read these instructions thoroughly before assembly and retain them for future reference.
Image: The VOYSIGN Outdoor Steel Dining Table, model VS01ST003N-7, shown fully assembled on a patio, complete with chairs and an umbrella. This image provides a visual representation of the product in an outdoor setting.
Maklumat Keselamatan
Sila patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan dan kerosakan pada produk:
- Always follow assembly instructions carefully to avoid injury.
- Ensure the table is properly anchored to prevent tipping.
- Do not expose the table to harsh weather conditions without proper care and maintenance.
- Jauhkan semua bahagian kecil dan bahan pembungkusan daripada kanak-kanak semasa pemasangan.
- Assemble on a soft, clean surface to prevent scratching the table's finish.
Senarai Bahagian
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
- Tabletop sections (2 pieces)
- Table legs (4 pieces)
- Support brackets (6 pieces)
- Slatted metal plate (1 piece, for storage shelf)
- Hardware pack (screws, bolts, washers, nuts)
- Assembly tools (included)
Image: An exploded diagram illustrating the installation procedure, detailing various components labeled A through N. This visual aid helps identify all parts required for assembly.
Persediaan dan Perhimpunan
Assembly typically takes one person approximately 10 minutes. Follow these steps carefully:
- Buka Pembungkusan Komponen: Carefully remove all parts from the packaging. Place them on a soft, flat surface to prevent scratches.
- Pasang Atas Meja: Join the two tabletop sections (A) together using the provided hardware (I, G, H). Ensure they are aligned correctly.
Tip: Do not fully tighten screws until all components are aligned. - Pasang Kaki: Secure the table legs (B) to the tabletop assembly (A) using the appropriate bolts and washers (C, D, F). The six brackets on the legs (as shown in image) ensure stability.
- Pasang Rak Penyimpanan: Attach the slatted metal plate (K) to the designated support points (L) between the legs to create the storage shelf.
- Pengetatan Akhir: Once all parts are loosely assembled and aligned, gradually tighten all screws and bolts securely. Do not overtighten.
- Semak Kestabilan: Gently shake the table to ensure it is stable and all connections are firm.
Imej: A terperinci view of the table's leg structure, highlighting the six brackets designed to enhance stability and support.
Image: A close-up of the slatted metal plate positioned beneath the tabletop, illustrating its function as a convenient storage shelf.
Arahan Operasi
The VOYSIGN Outdoor Steel Dining Table is designed for outdoor dining and general use. It features a 1.57-inch diameter umbrella hole for shade. Ensure the table is placed on a level surface to prevent wobbling.
Imej: A terperinci view of the umbrella hole integrated into the tabletop, indicating an inside diameter of 1.57 inches for standard patio umbrellas.
Penjagaan dan Penyelenggaraan
To ensure the longevity and appearance of your VOYSIGN dining table, follow these maintenance guidelines:
- Pembersihan: Wipe the table regularly with a damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the powder coating.
- Pencegahan Karat: The table features a durable powder coating for rust resistance. However, to maximize its lifespan, avoid prolonged exposure to standing water or extreme weather conditions. Cover the table when not in use or during inclement weather.
- Pemeriksaan: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary.
Image: This image demonstrates the weather-resistant properties and powder coating of the table's surface, highlighted by water droplets beading on the material.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Meja goyah selepas pemasangan. | Screws or bolts are not fully tightened; uneven assembly. | Ensure all fasteners are securely tightened. Loosen all fasteners slightly, adjust the table on a flat surface, then retighten. |
| Bahagian tidak sejajar semasa pemasangan. | Fasteners were tightened too early; incorrect orientation of parts. | Do not tighten screws until all parts are loosely assembled and aligned. Review the assembly diagram for correct part orientation. |
| Bahagian yang hilang atau rosak. | Ralat pembungkusan atau kerosakan penghantaran. | Contact customer support immediately for replacement parts. Refer to the "Warranty and Support" section. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | VS01ST003N-7 |
| Jenama | VOYSIGN |
| Dimensi Produk (D x W x H) | 38" x 59" x 28" (96.5 cm x 149.9 cm x 71.1 cm) |
| Berat Barang | 40 paun (18.1 kg) |
| Bahan Bingkai | Keluli Aloi |
| Jenis Bahan Atas | Keluli Aloi |
| warna | Charcoal-Black |
| Diameter Lubang Payung | 1.57 inci (4 cm) |
| Kapasiti Tempat Duduk | 6 orang |
| Perhimpunan yang Diperlukan | ya |
| Penggunaan Dalaman/Luar | Luar |
Image: A diagram illustrating key product data including dimensions (width 38", height 28", length 60"), product weight (40 lbs), and weight capacity (176 lbs).
Waranti dan Sokongan
Waranti: This VOYSIGN product comes with a 1-year warranty from the date of purchase. The manufacturer also provides lifetime accessories and parts supply after-sale service.
Sokongan Pelanggan: For any further questions, assistance with assembly, missing parts, or warranty claims, please contact our service team. You can typically find contact information on the product packaging or through the retailer where the product was purchased.
Manufacturer: VOYSIGN
