INTEX 2500 GPH GCFI Pool Filter Pump with Timer (633T) & Deluxe Maintenance Kit

1. Produk Lebihview

The Intex 2500 GPH GCFI Pool Filter Pump with Timer (Model 633T) and Deluxe Maintenance Kit provides a comprehensive solution for maintaining clean and clear pool water. The filter pump features a powerful 2500 gallons per hour (GPH) flow rate and a built-in automatic timer for convenient daily cleaning cycles. For enhanced safety, the pump includes a Ground Fault Circuit Interrupter (GFCI) which automatically shuts off the pump if an electrical current is exposed to water, preventing circuit overloads and ensuring user protection.

The accompanying Deluxe Maintenance Kit includes essential tools to keep your pool pristine. This kit is designed to work with your existing filter pump to effectively remove debris from the pool floor and surface.

1.1 Komponen Termasuk

• Intex 2500 GPH Filter Pump with Timer and GFCI
• Vacuum head for debris removal from pool floor
• Skimmer net for floating debris collection
• Leaf rake for surface skimming
• Hoses and connectors for pump and vacuum
• Telescoping pole (for maintenance tools)

1.2 Imej Produk

2. Maklumat Keselamatan Penting

Read and understand all instructions before installing and using this product. Failure to follow these instructions can result in electric shock, fire, or serious injury.

• Keselamatan Elektrik: Always connect the pump to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not bypass or disable the GFCI. If the GFCI trips, do not use the pump until the cause of the trip has been identified and corrected.
• Air dan Elektrik: Never operate the pump when people are in the pool. Ensure all electrical connections are dry and secure.
• penempatan: Position the pump on a firm, level surface, away from the edge of the pool to prevent accidental tipping or submersion.
• Penyelenggaraan: Disconnect the pump from the power source before performing any maintenance, cleaning, or servicing.
• Kanak-kanak: Keep children away from the pump and electrical connections. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• kerosakan: Do not operate the pump if the power cord or plug is damaged. Contact qualified service personnel for repair.

3. Persediaan dan Pemasangan

3.1 Pemasangan Pam Penapis

1. Pilih Lokasi: Place the filter pump on a stable, level surface at least 8 feet (2.4 meters) from the pool wall. Ensure the location is dry and protected from direct sunlight and extreme weather.
2. Sambungkan Hos:
   • Connect one end of the filter pump hose to the lower pool connection (inlet) and the other end to the pump's inlet port.
   • Connect the second hose from the pump's outlet port to the upper pool connection (return).
   • Secure all hose connections with clamps untuk mengelakkan kebocoran.
3. Isi Kolam: Ensure the pool is filled with water to the recommended level, covering both inlet and outlet connections.
4. Pam Perdana: Open the air release valve on top of the filter housing to allow air to escape. Once water flows steadily from the valve, close it.
5. Sambungan Elektrik: Plug the GFCI power cord into a properly grounded electrical outlet. Do not use extension cords.

This pump is designed for Intex 24' and 18' Easy Set pools, Frame Set pools, Ellipse Oval pools, Rectangular Frame pools, and similar sized swimming pools from other manufacturers.

3.2 Deluxe Maintenance Kit Assembly

1. Assemble Telescoping Pole: Extend the telescoping pole to the desired length and secure it.
2. Lampirkan Alat:
   • For the vacuum, attach the vacuum head to the telescoping pole. Connect the vacuum hose to the vacuum head and the other end to the pump's suction side (usually through the skimmer or a dedicated vacuum port).
   • For the skimmer net or leaf rake, simply attach the desired tool to the end of the telescoping pole.

4. Arahan Operasi

4.1 Operasi Pam Penapis

1. Ujian GFCI: Before each use, press the "TEST" button on the GFCI plug. The "RESET" button should pop out. Press "RESET" to resume operation. If it does not reset, do not use the pump and consult the troubleshooting section.
2. Hidupkan/Mati Kuasa: Use the power switch on the pump to turn it on or off.
3. Menetapkan Pemasa: The built-in automatic timer allows you to set a daily cleaning cycle. Refer to the specific timer instructions provided in the pump's dedicated manual for detailed programming steps. Typically, you will set the desired operating hours, and the pump will run daily for that duration.
4. Masa Larian: For optimal water clarity, run the filter pump for at least 4-6 hours per day, or longer depending on pool size, usage, and water conditions.

4.2 Using the Deluxe Maintenance Kit

• Memvakum: With the pump running, slowly move the vacuum head across the pool floor to collect debris. The pump's suction will draw the debris into the filter.
• Skimming: Use the skimmer net to remove floating debris such as leaves, insects, and other particles from the water surface.
• Leaf Raking: The leaf rake is effective for larger debris on the surface or bottom of the pool.

5. Penyelenggaraan

Regular maintenance is crucial for the longevity and efficient operation of your filter pump and maintenance kit.

5.1 Filter Pump Maintenance

1. Clean/Replace Filter Cartridge:
   • Kekerapan: Check the filter cartridge weekly, or more often during heavy use.
   • Prosedur: Disconnect the pump from power. Close the plunger valves (if applicable) or use stoppers to prevent water flow from the pool. Unscrew the filter housing lid and remove the cartridge. Rinse the cartridge thoroughly with a garden hose. If the cartridge remains dirty or damaged, replace it with a new Intex Type A filter cartridge.
   • Pemasangan semula: Place the clean/new cartridge back into the housing, secure the lid, open valves, and reconnect power.
2. Pembersihan Perumahan Pam: Periodically wipe down the exterior of the pump housing with a damp kain untuk menghilangkan kotoran dan habuk.
3. Pemeriksaan hos: Regularly inspect hoses for cracks, kinks, or leaks. Replace damaged hoses immediately.

5.2 Maintenance Kit Cleaning

• Rinse all components of the maintenance kit (vacuum head, skimmer net, leaf rake, hoses) with fresh water after each use to remove chlorine and debris.
• Store tools in a dry, shaded area when not in use to prevent sun damage and prolong their lifespan.

5.3 Penyimpanan Musim Sejuk (Penyimpanan Luar Musim)

1. Disconnect the pump from power and detach all hoses.
2. Drain all water from the pump and hoses.
3. Remove and discard the filter cartridge.
4. Store the pump and all kit components in a dry, frost-free location.

6. Penyelesaian masalah

If you encounter issues with your Intex filter pump or maintenance kit, refer to the following common problems and solutions:

7. Spesifikasi Produk

8. Waranti dan Sokongan Pelanggan

For specific warranty information, please refer to the documentation included with your product packaging or visit the official Intex webtapak. Terma dan syarat jaminan mungkin berbeza.

If you require technical assistance, have questions about product operation, or need to inquire about parts and service, please contact Intex customer support directly. You can often find contact information on the Intex website or within your product's original manual.

You can also visit the official Intex store for more information and products: Kedai Intex di Amazon.