Triangle Borea BRA1-3D Home Cinema Speakers User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Triangle Borea BRA1-3D Home Cinema Speakers. These speakers are designed to enhance your home theater experience by providing versatile sound effects, compatible with Atmos, DTS:X, and Auro 3D audio formats.

The Borea BRA1-3D speakers can function as either vertical 3D effect speakers or horizontal effect speakers, offering flexibility in configuring your audio system from a 3.1.2 up to a 9.2.4 setup.

2. Produk Lebihview

2.1. Kandungan Pakej

Pastikan semua item ada dalam pakej:

• 2 x Triangle Borea BRA1-3D Speakers

2.2. Ciri-ciri Utama

• Crossover boleh laras: Allows for optimization between vertical 3D and horizontal effect modes.
• EFS Fabric Dome Tweeter: Delivers clear and precise high-frequency sound.
• Natural Cellulose Paper Membrane Driver (16 cm): Provides open and expansive mid-range and bass.
• Angled Front Design: Ensures precise targeting of sound waves towards the listener.
• Peletakan Serbaguna: Designed for placement atop main speakers for upward-firing effects or wall-mounted for surround effects.

Rajah 1: Depan view of the Triangle Borea BRA1-3D speaker, showcasing the tweeter and main driver without the protective grille.

Rajah 2: Depan view of the Triangle Borea BRA1-3D speaker with its protective grille installed, providing a sleek appearance.

3. Persediaan

3.1. Penempatan Speaker

The Borea BRA1-3D speakers offer flexible placement options to optimize your home theater sound:

• Vertical 3D Effects (Atmos/DTS:X/Auro 3D): Place the BRA1-3D speakers directly on top of your main front or surround speakers. Ensure the angled front is facing upwards towards the ceiling. This configuration utilizes sound wave reflection to create an immersive overhead sound experience.
• Horizontal Effect Speakers (Surround): For traditional surround sound, the BRA1-3D speakers can be mounted on the back or side walls. Utilize the integrated mounting system for secure installation. Position them at ear level or slightly above for optimal sound dispersion.

The angled front design is crucial for directing sound waves precisely, whether upwards for 3D effects or directly towards the listening area for surround sound.

3.2. Sambungan

Connect the BRA1-3D speakers to your amplifier or AV receiver using high-quality speaker cables. Observe correct polarity (positive to positive, negative to negative) to ensure proper phase and sound reproduction.

• The speakers have a nominal impedance of 8 Ohms (minimum 4.5 Ohms), making them compatible with a wide range of amppenyelamat.
• Pastikan anda amplifier can safely drive speakers with this impedance rating.

Rajah 3: Belakang view of the Triangle Borea BRA1-3D speaker, showing the speaker terminals for connection to an amplebih hidup.

4. Arahan Operasi

4.1. Pelarasan Crossover

The Borea BRA1-3D speakers feature an adjustable crossover. This allows you to optimize their performance based on their placement and intended use:

• Upward-Firing (Vertical 3D): Select the appropriate crossover setting for upward-firing operation. This setting is designed to complement the reflection of sound off the ceiling for immersive 3D audio.
• Direct-Firing (Horizontal Surround): Select the appropriate crossover setting for direct-firing operation when used as traditional surround speakers. This setting optimizes the sound for direct listening.

Refer to your AV receiver's setup menu for speaker configuration and calibration. It is recommended to run an automatic room correction system (if available) after speaker placement and connection to fine-tune the sound.

4.2. Konfigurasi Sistem

These speakers are designed to integrate into various home theater configurations, from a basic 3.1.2 system to an advanced 9.2.4 setup. The specific configuration will depend on your AV receiver's capabilities and the number of speakers in your system.

• A 3.1.2 system includes three front channels (left, center, right), one subwoofer, and two overhead/height channels (provided by the BRA1-3D speakers).
• A 9.2.4 system would involve nine main channels, two subwoofers, and four overhead/height channels.

Consult your AV receiver's manual for detailed instructions on configuring your specific surround sound setup.

5. Penyelenggaraan

Untuk memastikan jangka hayat dan prestasi optimum pembesar suara anda, ikuti garis panduan penyelenggaraan ini:

• Pembersihan: Gently wipe the speaker cabinets with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish.
• gril: The speaker grilles can be carefully removed for cleaning. Use a soft brush or vacuum cleaner with a brush attachment to remove dust.
• penempatan: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity.
• Pengendalian: When moving speakers, always lift them carefully and avoid dropping them.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan pembesar suara anda, rujuk langkah penyelesaian masalah biasa berikut:

• Tiada Bunyi:
  • Periksa semua sambungan kabel antara pembesar suara dan amplifier/receiver. Ensure they are secure and correctly polarized.
  • Sahkan amplifier/penerima dihidupkan dan sumber input yang betul dipilih.
  • Confirm the volume is not muted or set too low.
• Bunyi Herot:
  • Kurangkan tahap kelantangan pada anda amppenguat/penerima.
  • Periksa sambungan wayar pembesar suara untuk sebarang untaian longgar atau litar pintas.
  • Memastikan amplifier is not overdriven or clipping.
• Bunyi Tidak Seimbang:
  • Semak tetapan baki pada anda amppenguat/penerima.
  • Ensure both speakers are connected with correct polarity.
  • Sahkan kedudukan pembesar suara adalah simetri berbanding kedudukan pendengaran.

If problems persist, consult your amplifier/receiver manual or contact Triangle customer support.

7. Spesifikasi

8. Waranti dan Sokongan

8.1. Maklumat Waranti

The Triangle Borea BRA1-3D speakers come with a Waranti Terhad. Please refer to the warranty card included with your product or visit the official Triangle weblaman web untuk terma dan syarat terperinci mengenai perlindungan, tempoh dan prosedur tuntutan.

8.2. Sokongan Pelanggan

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Triangle customer support. Contact information can typically be found on the manufacturer's webtapak atau pada pembungkusan produk.

You can visit the official Triangle store on Amazon for more information: Triangle Store