ALPINE SXE-1025S 2-Way Coaxial Speaker Instruction Manual

pengenalan

This manual provides essential information for the installation, operation, and maintenance of your ALPINE SXE-1025S 2-Way Coaxial Speakers. Please read it thoroughly before use to ensure proper setup and optimal performance.

The ALPINE SXE-1025S speakers are a pair of 10 cm (4") 2-way coaxial speakers designed for car audio systems. They feature a robust construction for clear and powerful sound reproduction.

Imej: Depan dan sisi view of the ALPINE SXE-1025S coaxial speakers.

Each speaker includes a woofer with a grey polypropylene cone and a ferrite magnet, paired with a 2 cm (0.8") tweeter featuring a titanium dome and neodymium magnet. This combination of materials ensures a rigid, lightweight, and highly efficient design, contributing to excellent frequency extension and overall sound quality. The frequency response ranges from 100 Hz to 20,000 Hz.

Persediaan dan Pemasangan

Proper installation is crucial for the performance and longevity of your speakers. It is recommended that installation be performed by a qualified professional.

Kandungan Pakej:

• 2 x ALPINE SXE-1025S Coaxial Speakers
• Cincin Pelekap
• Skru Pemasangan

Dimensi Pemasangan:

• Diameter pembesar suara: 9.95 sm
• Diameter Lubang Pemasangan: 9.15 sm
• Kedalaman Pemasangan: 4.3 sm
• Diagonal Installation Hole Spacing: 12.3 sm
• Diameter magnet: 7.1 sm

Image: Technical diagram illustrating the dimensions of the speaker, including diameter, mounting depth, and magnet diameter.

Pendawaian dan Amppemberitahuan:

These speakers have an impedance of 4 Ohms. They can be connected to a traditional 2-channel Class AB amplifier or directly to your car's factory radio. For optimal sound quality and performance, it is recommended to provide 25 watts RMS per channel.

Awas:

• Do not exceed the recommended power ratings (180 Watts Max) to prevent irreparable damage to the speakers.
• Ensure correct polarity when connecting the speaker wires to avoid phase issues and degraded sound quality.

Image: A pair of ALPINE SXE-1025S coaxial speakers, showing their front view.

Arahan Operasi

Once installed, operate your speakers through your car's head unit or amplifier. Adjust settings such as volume, bass, treble, and balance to your preference. Start with moderate volume levels and gradually increase to avoid distortion or damage.

• Kawalan Kelantangan: Adjust the volume from your head unit. Avoid excessively high volumes that cause audible distortion.
• Kawalan Nada: Use bass and treble adjustments on your head unit or amplifier to fine-tune the sound.
• Fader / Baki: Adjust these settings to optimize the sound stage dalam kenderaan anda.

Penyelenggaraan

The ALPINE SXE-1025S speakers require minimal maintenance to ensure long-lasting performance.

• Pembersihan: Lap gril dan sekeliling pembesar suara dengan kain lembut dan kering untuk menghilangkan habuk. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
• Pemeriksaan: Periodically check the speaker cones and surrounds for any signs of damage or wear.
• Faktor Persekitaran: While robust, avoid exposing speakers to extreme moisture or direct sunlight for extended periods, as this can degrade materials over time.

Menyelesaikan masalah

Jika anda mengalami masalah dengan pembesar suara anda, rujuk masalah dan penyelesaian biasa berikut:

If problems persist after attempting these solutions, consult a qualified car audio technician.

Spesifikasi

Maklumat Waranti

Specific warranty details for the ALPINE SXE-1025S speakers are not provided in the product information. Please refer to the retailer or manufacturer's official webtapak untuk terma dan syarat jaminan.

Sokongan Pelanggan

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact the retailer where you purchased the product or refer to the official Alpine support channels.