OREiN SL-1

OREiN LED Flood Light Outdoor Motion Sensor

Manual Pengguna

1. Maklumat Keselamatan

Sila baca semua arahan keselamatan dengan teliti sebelum pemasangan dan operasi. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau bahaya lain.

2. Produk Lebihview

The OREiN LED Flood Light is an outdoor motion sensor security light designed for enhanced illumination and security around your home. It features a 450° wide adjustable design, allowing for flexible light direction, and offers three distinct operating modes to suit various needs.

OREiN LED Flood Light with two adjustable heads and a central motion sensor

Figure 2.1: OREiN LED Flood Light, showcasing its dual adjustable heads and integrated motion sensor.

Ciri-ciri Utama:

Apa yang ada di dalam Kotak:

3. Pemasangan

The OREiN LED Flood Light is designed for hardwired installation and requires connection to a standard junction box (not included). It supports both wall mounting and soffit mounting.

Langkah Pemasangan:

  1. Sediakan Permukaan Pemasangan: Ensure the power is off at the circuit breaker. Identify the location for installation, preferably a standard junction box.
  2. Betulkan Braket: Secure the provided mounting bracket to the junction box or wall using the appropriate screws. The bracket dimensions are approximately 3.54 inches (9 cm) in diameter.
    Diagram showing the mounting bracket dimensions and how it attaches to a junction box

    Figure 3.1: Mounting bracket dimensions and attachment to a junction box.

  3. Sambungan Pendawaian: Connect the wires from the fixture to the corresponding wires in the junction box (e.g., black to black, white to white, ground to ground). Use wire nuts to secure connections.
    Step-by-step diagram showing electrical wiring connections for the flood light

    Figure 3.2: Wiring connections for hardwired installation.

  4. Pasang Lekapan Lampu: Align the fixture with the mounting bracket and secure it with screws. Ensure a tight and stable fit.
  5. Laraskan Kepala Cahaya: Once mounted, adjust the two light heads and the motion sensor to your desired angles. The fixture offers 450° of total adjustment.
    Image demonstrating the 450 degree wide light adjustment capability of the flood light

    Figure 3.3: Flexible adjustment of light heads to avoid light pollution or illuminate specific areas.

    Image showing the flood light mounted on a soffit, highlighting its soffit ceiling mount friendly design

    Figure 3.4: Soffit ceiling mount friendly design with no angle restrictions for the sensor.

  6. Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar.

4. Arahan Operasi

The OREiN LED Flood Light features an integrated red button for mode selection and control. The motion sensor has a detection range of 6.4-40 feet.

Image illustrating the motion detection range of the flood light in a driveway setting

Figure 4.1: Motion activated lighting with a detection range of 6.4-40 feet.

Red Button Setting Instructions:

  1. Hidup/Mati: Long press the red button for 2 seconds to turn the light on or off.
  2. Tukar Mod: Single click the red button to cycle through the three operating modes. Observe the light's behavior to identify the current mode:
    • Mod Keselamatan: The light flashes twice slowly. In this mode, the motion sensor turns on the light to 100% brightness when motion is detected, and turns off when no motion is detected.
      Illustration of Security Mode where light turns on to 100% brightness upon motion detection

      Figure 4.2: Security Mode operation (100% brightness on motion).

    • Day to Day Mode: The light flashes twice quickly. In this mode, the light stays at 30% brightness when no motion is detected and switches to 100% brightness upon detecting motion.
      Illustration of Day to Day Mode where light stays at 30% brightness and goes to 100% on motion

      Figure 4.3: Day to Day Mode operation (30% brightness, 100% on motion).

    • Mod Manual: The light is fixed (no flashes). In this mode, the light turns on at night and stays on all night, controlled by a manual switch.
      Illustration of Manual Mode where light is controlled by a manual switch

      Figure 4.4: Manual Mode operation (controlled by external switch).

  3. Tetapkan semula: Long press the red button for 10 seconds to reset the light to its default settings.
    Close-up image of the red button and its functions: On/Off, Switch Modes, Reset

    Figure 4.5: Red button functions for On/Off, Mode Switching, and Reset.

Melaraskan Arah Cahaya:

The flood light features multiple adjustable joints on its light arms, allowing you to precisely direct the light where needed. This flexibility helps in avoiding light pollution to neighbors or illuminating specific areas like walkways or blind corners.

Diagram showing the various adjustable joints and angles on the flood light arms

Figure 4.6: Adjustable joints for precise light direction.

5. Penyelenggaraan

The OREiN LED Flood Light is designed for long-lasting performance with minimal maintenance. Its IP65 rating ensures protection against dust and water.

Image showing the flood light being exposed to rain, demonstrating its IP65 waterproof rating

Figure 5.1: IP65 Waterproof design, suitable for various weather conditions.

6. Penyelesaian masalah

If you encounter issues with your OREiN LED Flood Light, refer to the following common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Light stays on constantly (does not turn off or dim).Incorrect mode setting (e.g., Manual Mode selected). Sensor sensitivity or ambient light sensor (LUX) setting.
  • Single click the red button to cycle through modes and ensure Security Mode or Day to Day Mode is selected.
  • Check the ambient light sensor (if adjustable) to ensure it's not set to keep the light on during daylight.
  • Long press the red button for 10 seconds to reset the light to default settings, then reconfigure.
Light does not turn on when motion is detected.Incorrect mode setting. Sensor obstruction or incorrect angle. Power supply issue.
  • Ensure Security Mode or Day to Day Mode is active.
  • Verify the motion sensor is not obstructed and is angled correctly to cover the desired area.
  • Check power connections and circuit breaker.
Motion sensor does not detect motion at close range or angles.Sensor angle not optimized for close-range detection.Adjust the motion sensor's angle downwards to improve close-range detection. The sensor has a 350° rotation capability.
Cahaya berkelip atau malap.Loose wiring connection. Power fluctuation.
  • Turn off power at the breaker and check all wiring connections for tightness.
  • If the issue persists, consult a qualified electrician.

7. Spesifikasi

CiriSpesifikasi
JenamaOREiN
Nama ModelOL36002440 (Item Model Number: SL-1)
Jenis Sumber CahayaLED
Wattage12 Watt (Setara 150W)
Kecerahan1600 Lumen
Suhu Warna5000 Kelvin (Putih Siang)
Voltage120 Volt
bahanPolycarbonate, Acrylonitrile Butadiene Styrene (ABS)
warnaHitam
Dimensi Produk7"P x 5"L x 5"T (17.78 sm x 12.7 sm x 12.7 sm)
Berat Barang1.67 paun (0.76 kg)
Tahap Ketahanan AirIP65 Kalis Air
Kehidupan Purata50,000 Jam
Jenis PemasanganWall Mounting and Soffit Mounting
Kaedah KawalanPush Button (on fixture)
PensijilanCE, FCC, RoHS

8. Waranti dan Sokongan

OREiN stands behind the quality of its products. Your LED Flood Light comes with a comprehensive warranty and dedicated customer support.

OREiN products are certified by FCC, CE, and ROSH, ensuring high quality standards and safety.