Aerocool DELTABKV1 ATX PC Case User Manual

pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aerocool DELTABKV1 ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe use of the product.

Imej: Bersudut view of the Aerocool DELTABKV1 PC case, highlighting its RGB front panel design and the transparent tempered glass side panel.

1. Persediaan dan Pemasangan

Follow these steps for installing components into your Aerocool DELTABKV1 PC case.

1.1 Menyediakan Kes

1. Carefully unpack the PC case and remove all packaging materials.
2. Letakkan bekas di atas permukaan yang stabil dan rata.
3. Remove the tempered glass side panel by unscrewing the thumb screws located at the rear of the panel. Gently slide the panel off and set it aside on a soft, non-abrasive surface to prevent scratches.
4. Remove the right-side metal panel by unscrewing its thumb screws to access the cable management area.

Imej: Dalaman view of the PC case, illustrating the main compartment for motherboard and expansion cards, along with drive mounting points.

1.2 Pemasangan Motherboard

1. Identify the correct standoff locations for your ATX, Micro-ATX, or Mini-ITX motherboard. The case may have pre-installed standoffs or marked positions.
2. Install any necessary additional standoffs.
3. Pasangkan pelindung I/O ke dalam bukaan belakang bekas.
4. Letakkan papan induk dengan berhati-hati pada penyangga, selaraskan lubang skru.
5. Pasangkan papan induk dengan skru yang disediakan. Jangan terlalu ketatkan.

1.3 Pemasangan Pemacu Storan

The case supports 2 x 3.5" HDDs and 2 x 2.5" SSDs.

• HDD 3.5": Locate the drive cage in the lower compartment. Slide the 3.5" drives into the bays and secure them with screws.
• SSD 2.5": Mount the 2.5" drives onto the designated mounting points behind the motherboard tray or in the drive cage, securing them with screws.

Imej: View of the rear interior, illustrating the space for cable routing and mounting locations for 2.5-inch storage drives.

1.4 Pemasangan Unit Bekalan Kuasa (PSU)

1. Letakkan PSU di dalam petak khusus di bahagian bawah belakang bekas.
2. Ensure the PSU fan faces downwards (if there's a filtered vent at the bottom) or upwards, depending on your cooling preference and PSU design.
3. Secure the PSU to the case with screws from the rear.

1.5 Pemasangan Kad Pengembangan (GPU)

1. Tanggalkan penutup slot PCI yang diperlukan dari bahagian belakang casing.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Secure the expansion card(s) with screws. The case supports graphics cards up to 307mm in length.

Image: Rear exterior of the case, displaying the PCI expansion slots, the cutout for the power supply, and the pre-installed 12cm rear fan.

1.6 Fan and Cooling Installation

The case includes one 12cm rear fan. Additional fan configurations are supported:

• Depan: 3 x 12cm fans (optional)
• Atas: 2 x 12cm fans (optional)
• belakang: 1 x 12cm fan (pre-installed)
• Kafan PSU: 2 x 12cm fans (optional)

For liquid cooling, a 12cm radiator can be installed at the rear.

1.7 Sambungan Panel Hadapan

Connect the front panel cables (USB, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Image: Top-front perspective of the case, highlighting the accessible front I/O panel which includes USB ports, audio jacks, and control buttons.

1.8 Pengurusan Kabel

Utilize the space behind the motherboard tray and the cable tie-down points to route and secure cables. This improves airflow and aesthetics.

1.9 Perhimpunan Akhir

1. Once all components are installed and cables are managed, reattach the right-side metal panel.
2. Carefully reattach the tempered glass side panel and secure it with the thumb screws.

2. Operating the Case Features

2.1 Kawalan Pencahayaan RGB

The Aerocool DELTABKV1 features an RGB front panel with integrated lighting modes. Use the dedicated LED control button on the top panel to cycle through various lighting effects and colors. Press and hold the LED button for a few seconds to turn the RGB lighting on or off.

Imej: Hadapan terus view of the PC case, emphasizing the distinctive RGB lighting design on the front panel.

2.2 Pelabuhan Panel Hadapan

The top panel provides convenient access to:

• Port USB 2.0 (x2)
• HD Audio Jacks (Headphone and Microphone)
• Butang Kuasa
• Butang Tetapkan Semula
• Butang Kawalan LED

Ensure these are correctly connected to your motherboard for full functionality.

3. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat sarung PC anda.

• Penapis Habuk: Periodically check and clean any removable dust filters (e.g., under the PSU, front intake). Use compressed air or a soft brush to remove accumulated dust.
• Pembersihan Luaran: Lap permukaan luar dengan lembut, damp cloth. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth.
• Internal Dust: Every few months, open the case and use compressed air to gently remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

4. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi.

• Tiada Kuasa:
  • Pastikan PSU dihidupkan dan disambungkan dengan betul ke salur keluar dinding.
  • Verify that the power button cable from the case is correctly connected to the motherboard's front panel header.
  • Check all internal power connections (24-pin ATX, 8-pin CPU, GPU power).
• Peminat Tidak Berputar:
  • Confirm fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Semak tetapan BIOS/UEFI untuk kawalan kelajuan kipas.
• Pencahayaan RGB Tidak Berfungsi:
  • Ensure the RGB cable from the front panel is connected to the appropriate RGB header on your motherboard or a dedicated RGB controller.
  • Press the LED control button on the top panel to cycle through modes.
  • Check for any software control if connected to a motherboard RGB header.
• Panel Depan USB/Audio Tidak Berfungsi:
  • Verify that the USB and HD Audio cables from the case are correctly connected to the corresponding headers on your motherboard.

If issues persist, consult your motherboard manual or the component manufacturer's support resources.

5. Spesifikasi

6. Waranti dan Sokongan

The Aerocool DELTABKV1 PC Case is covered by the manufacturer's standard warranty. For specific warranty terms, duration, and support inquiries, please refer to the official AeroCool webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.

Untuk bantuan lanjut, lawati AeroCool official webtapak.