1. Pengenalan
This manual provides essential information for the safe and efficient operation of your OMTech 60W MOPA Fiber Laser Engraver. Please read this manual thoroughly before operating the machine and retain it for future reference.
The OMTech 60W MOPA Fiber Laser Engraver is designed for high-precision marking and engraving on various materials, including metals, gemstones, and silicon. It features a JPT MOPA fiber laser source, a 175x175mm work area, and compatibility with EzCad2 software.
2. Maklumat Keselamatan
WARNING: This product is a Class 2 laser device with 0.874 mW output power. Improper use can result in serious injury, including eye damage and burns. Always follow safety guidelines.
- Always wear the provided protective eyewear when operating the laser engraver.
- Ensure the work area is well-ventilated to dissipate fumes generated during engraving.
- Never look directly into the laser beam or at reflections.
- Keep flammable materials away from the laser work area.
- Do not operate the machine if any components are damaged or malfunctioning.
- Biasakan diri anda dengan lokasi dan fungsi butang berhenti kecemasan.
3. Produk Lebihview dan Komponen
The OMTech 60W MOPA Fiber Laser Engraver system includes the main laser unit, a rotary axis, and various accessories.
Image: The OMTech 60W Fiber Laser Engraver, showing the main laser unit, control box, and the included 3-jaw rotary axis.
3.1 Kandungan Pakej
The following items are typically included with your OMTech 60W MOPA Fiber Laser Engraver:
- 60W JPT M7 Laser Source + 80mm 3-Jaw Rotary Axis
- 175x175mm F-Theta Lens
- High Speed Galvo Scanner
- Ezcad2 Fiber Marking Software
- Kacamata Pelindung
- Kabel Kuasa
- Kabel USB
- Tukar kaki
- Bar Kedudukan
- Laser Keys
- Pemacu Denyar USB
- Four-pin Aviation Connector
- Bolts, Hex Wrench, Height Lock, Tape Measure, Steel Ruler
4. Arahan Persediaan
4.1 Membongkar dan Meletakkan
- Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- Place the laser engraver on a stable, level surface in a well-ventilated area. Ensure sufficient space around the machine for operation and maintenance.
- Keep the packaging materials for potential future transport or storage.
4.2 Komponen Penyambung
- Connect the main laser unit to the control box using the provided cables.
- Connect the USB cable from the control box to your computer.
- If using the rotary axis, connect it to the designated 4-pin port on the control box.
- Connect the power cable to the control box and then to a grounded power outlet.
Image: The OMTech 60W Fiber Laser Engraver with the rotary axis attached, demonstrating a typical setup configuration.
4.3 Pemasangan Perisian
The engraver includes EzCad2 software. Install it from the provided USB flash drive or download the latest version from the OMTech webtapak.
- Masukkan pemacu kilat USB ke dalam komputer anda.
- Follow the on-screen instructions to install EzCad2.
- The software is compatible with Windows XP, Vista, 7, 8, and 10.
Image: The laser engraver connected to a laptop, illustrating the software interface for design and control.
5. Arahan Operasi
5.1 Proses Ukiran Asas
- Hidupkan kuasa: Insert the laser keys and turn the key switch to the ON position. Press the green power button.
- Pelancaran Perisian: Open EzCad2 software on your computer.
- Persediaan Reka Bentuk: Create or import your design. The software supports various image formats.
- Peletakan Bahan: Place the material to be engraved on the workbed. Use the built-in grid and positioning bars for accurate placement.
- Memfokuskan: Adjust the laser head height to achieve optimal focus. The laser locator assists in this process.
- Tetapan Parameter: Configure laser parameters (power, speed, frequency, pulse width) within EzCad2 based on the material and desired effect. The MOPA laser allows for adjustable pulse frequency and width for color marking on metals.
- Praview: Use the red light preview function to verify the engraving area on your material.
- Mula Mengukir: Ensure protective eyewear is worn. Initiate the engraving process from the software or use the footpad trigger for batch work.
Imej: Dari dekat view of the laser beam interacting with a material on the workbed, demonstrating the precision of the engraving process.
5.2 Using the Rotary Axis
The 80mm 3-jaw rotary axis allows for engraving on cylindrical or curved surfaces.
- Connect the rotary axis to the 4-pin port on the control box.
- Secure the cylindrical object (e.g., ring, bracelet, cup) in the chuck of the rotary axis.
- Adjust the rotary axis position and laser focus for the curved surface.
- Enable and configure the rotary engraving settings in EzCad2 software.
- Proceed with engraving as described in the basic engraving process.
Image: The 80mm 3-jaw rotary axis, designed for engraving on cylindrical objects, shown with its adjustable components.
5.3 Color Marking on Metals
The MOPA fiber laser allows for creating various colors on certain metals, particularly stainless steel, by adjusting the pulse frequency and width.
- Experiment with different pulse frequency and width settings in EzCad2 to achieve desired color effects.
- Refer to material-specific guides or test pieces for optimal color marking parameters.
Image: A circular color chart engraved on a metal surface, demonstrating the MOPA laser's capability for high-contrast color marking.
6. Penyelenggaraan
6.1 Pembersihan
- Regularly clean the workbed and surrounding areas to remove debris and dust.
- Use a soft, lint-free cloth to gently clean the F-theta lens and protective window. Avoid abrasive materials.
- Ensure the machine is powered off and unplugged before cleaning.
6.2 Pertimbangan Alam Sekitar
The laser engraver is designed for operation in a range of temperatures (32°F to 104°F / 0°C to 40°C). Maintain a clean and stable environment to ensure optimal performance and longevity.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Laser tidak menembak | Emergency stop engaged, power off, software error, loose cable. | Check emergency stop, ensure power is on, restart software, verify all cable connections. |
| Kualiti ukiran yang teruk | Incorrect focus, wrong laser parameters, dirty lens, material issues. | Adjust focus, optimize power/speed/frequency settings, clean the lens, ensure material is suitable. |
| Software not connecting | USB cable issue, driver problem, software not launched correctly. | Check USB connection, reinstall USB drivers, restart computer and software. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | RYGEL-J6W2&LRA-6000 |
| Kuasa Keluaran | 60W |
| Jenis Laser | JPT MOPA Fiber Laser |
| Kawasan Penandaan | 175x175 mm (6.9x6.9 inci) |
| Maks. Kelajuan Penandaan | 10000 mm/s (275.6 ips) |
| Jangka Hayat Perkhidmatan (MTTF) | 100,000 jam |
| Main Laser Wavelength | 1064 nm |
| Laser Frequency Range | 1–4000 kHz |
| Julat Lebar Nadi | 2–500 ns |
| Diameter Rasuk | 7 ± 0.5 mm |
| Max. Pulse Energy | 1.5 mJ |
| Min. Beam Quality (Max. M²) | 1.4 |
| Perisian Pengendalian yang Disediakan | EzCad2 |
| Sistem Operasi yang Serasi | Windows XP, Vista, 7, 8, or 10 |
| Dimensi Produk | 22 x 22 x 28 inci |
| Berat Barang | 83 paun |
Image: A diagram showing the dimensions of the OMTech 60W MOPA Fiber Laser Engraver, alongside a table of its key technical specifications.
9. Waranti dan Sokongan
For warranty information and technical support, please contact OMTech directly.
- Sokongan Pelanggan: SUPPORT@OMTECHLASER.COM
- Sokongan Teknikal: TECHSUPPORT@OMTLASER.COM
- telefon: +1(949)438-4949
- Kedai atas talian: OMTech Amazon Store
