Logitech G435 Lightspeed and Bluetooth Wireless Gaming Headset Instruction Manual

1. Pengenalan

Thank you for choosing the Logitech G435 Lightspeed and Bluetooth Wireless Gaming Headset. This lightweight headset is designed to provide high-fidelity audio and clear communication across multiple gaming platforms and devices. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new headset.

Figure 1: Logitech G435 Headset and USB Lightspeed Receiver

2. Ciri-ciri Utama

• Kesambungan Dwi Wayarles: Connects via Lightspeed USB-A receiver for low-latency gaming or Bluetooth for mobile devices.
• Audio yang berkualiti tinggi: Features 40 mm audio drivers for balanced, immersive sound. Compatible with Dolby Atmos, Tempest 3D AudioTech, and Windows Sonic for surround sound experiences.
• Clear Voice Communication: Integrated dual beamforming microphones eliminate the need for a mic arm, reducing background noise for clear communication.
• Reka bentuk ringan: Weighs only 165 grams (5.8 oz) for extended comfort during long gaming sessions.
• Hayat Bateri yang Panjang: Nikmati sehingga 18 jam penggunaan berterusan dengan sekali cas.
• Comfortable Ear Cushions: Designed with memory foam ear cushions for total comfort.

3. Persediaan

3.1 Lightspeed Wireless Connection (PC, PlayStation)

1. Insert the Lightspeed USB-A receiver into a USB port on your PC or PlayStation console.
2. Power on your G435 headset by pressing and holding the Power button for 3 seconds.
3. The headset will automatically connect to the Lightspeed receiver. The status indicator light on the headset will turn cyan.

Figure 2: Lightspeed Wireless for Pro-Grade Connection

3.2 Bluetooth Connection (Smartphones, Nintendo Switch)

1. With the headset powered on, press and hold the Power button and the Mute button simultaneously for 3 seconds to enter Bluetooth pairing mode. The status indicator light will blink blue.
2. On your device (smartphone, Nintendo Switch), go to Bluetooth settings and select "G435" from the list of available devices.
3. Once connected, the status indicator light on the headset will turn solid blue.

Figure 3: Low-Latency Bluetooth Connectivity

3.3 Switching Between Lightspeed and Bluetooth

To switch between Lightspeed and Bluetooth connections, press and hold the Mute button for 3 seconds. The status indicator light will change to reflect the active connection (cyan for Lightspeed, blue for Bluetooth).

4. Arahan Operasi

4.1 Hidupkan/Mati Kuasa

• Hidupkan kuasa: Tekan dan tahan butang Kuasa selama 3 saat.
• Matikan: Tekan dan tahan butang Kuasa selama 3 saat.

4.2 Kawalan Kelantangan

Use the volume rocker buttons located on the left earcup to adjust the audio output level.

4.3 Mikrofon Bisu

Press the dedicated Mute button on the left earcup to mute or unmute the microphone. The status indicator light will change to indicate the microphone status.

Figure 4: Dual Beamforming Microphones

5. Penyelenggaraan

5.1 Pembersihan

• Lap set kepala dengan kain lembut dan kering.
• Jangan gunakan pembersih cecair atau bahan yang melelas.
• The memory foam ear cushions can be gently cleaned with a damp cloth and mild soap, then allowed to air dry completely.

5.2 Pengecasan Bateri

To charge the headset, connect the included USB-C cable to the charging port on the headset and to a USB power source. The status indicator light will show charging status (red while charging, green when fully charged). A full charge provides up to 18 hours of battery life.

6. Penyelesaian masalah

6.1 Tiada Isu Audio/Kesambungan

• Pastikan set kepala dihidupkan dan dicas sepenuhnya.
• For Lightspeed connection, verify the USB-A receiver is securely plugged into the device and the headset's status indicator is cyan.
• For Bluetooth connection, ensure Bluetooth is enabled on your device and the headset is paired (status indicator blue). Try re-pairing if necessary.
• Semak tahap kelantangan pada kedua-dua set kepala dan peranti anda yang disambungkan.
• Pastikan set kepala dipilih sebagai peranti output audio dalam tetapan sistem anda.

6.2 Mikrofon Tidak Berfungsi

• Ensure the microphone is not muted (check the Mute button and status indicator).
• Verify the headset is selected as the input device in your system's audio settings.
• Check for any software updates for your device or headset drivers.

7. Spesifikasi

8. Video Produk Rasmi

9. Waranti dan Sokongan

9.1 Polisi Pemulangan

This product is eligible for a 90-day refund/replacement return policy. Please refer to your purchase documentation for specific terms and conditions.

9.2 Sokongan Pengilang

For technical support, warranty claims, or additional product information, please visit the official Logitech support website or contact their customer service. Specific warranty details are typically provided with your product packaging.