Manual Arahan Tripod Video SmallRig AD-01

1. Produk Lebihview

The SmallRig AD-01 Video Tripod is a heavy-duty, professional aluminum double-tube tripod designed for DSLR cameras, camcorders, and other camera equipment. It features a 360-degree fluid head, a dual-mode quick-release plate, and adjustable height for versatile shooting scenarios. This manual provides essential information for the proper setup, operation, and maintenance of your AD-01 Video Tripod.

Figure 1.1: SmallRig AD-01 Video Tripod with included carrying bag.

2. Komponen dan Kandungan Pakej

Sebelum pemasangan, sila sahkan bahawa semua komponen yang disenaraikan di bawah terdapat di dalam pakej anda:

• 1 x Heavy-duty Fluid Head Tripod
• 1 x Membawa Beg
• 1 x Quick Release Plate (for MFT)
• 1 x 1/4''-20 Screw
• 1 x 3/8''-16 Screw
• 1 x Manual Pengguna

Rajah 2.1: Semua item yang disertakan dalam pakej produk.

Key parts of the tripod include:

• Kepala Cecair
• High Strength Aluminum Legs
• Flip Locking System
• Kaki Getah Tidak Licin
• Aluminum Alloy Central Stabilization System
• Tripod Locking Block

Rajah 2.2: Terperinci view of the tripod's main components.

3. Arahan Persediaan

3.1 Attaching the Fluid Head

The fluid head comes pre-attached to the tripod legs. Ensure it is securely fastened before use.

3.2 Melaraskan Ketinggian Tripod

To adjust the height of the tripod legs, open the flip locking system on each leg section. Extend the legs to the desired height and firmly close the flip locks to secure them. The tripod can be adjusted from 85cm (33 inches) to 186cm (73 inches).

Figure 3.1: The tripod's adjustable height range and flip locking system.

3.3 Memasang Kamera Anda

The fluid head features a dual-mode quick-release plate system. The included quick-release plate is compatible with MFT (Micro Four Thirds) systems and can be installed in both directions. For DJI RS 2/RS3/RS3 Pro compatibility, a separate quick-release plate (not included) is required.

1. Locate the quick-release plate on the fluid head.
2. Press the side quick release button to unlock and remove the plate.
3. Attach your camera to the quick-release plate using the appropriate 1/4''-20 or 3/8''-16 screw. Ensure the camera is securely fastened.
4. Slide the quick-release plate with the camera back into the fluid head until it clicks into place. Use the quick release plate fixing knob for additional security.

Figure 3.2: Fluid head controls including quick release mechanism and adjustment knobs.

Figure 3.3: Quick disassembly and mode switching of the quick release plate.

Figure 3.4: Quick release plate compatibility and built-in Allen wrench.

4. Arahan Operasi

4.1 Fluid Head Movement

The professional fluid head features a built-in damping and balancing system for smooth camera movements. It supports 360° horizontal panning and +90°/-60° vertical tilting. Use the horizontal adjustment knob and vertical adjustment knob to control the resistance and lock the head in position.

Figure 4.1: Demonstrating the 360-degree panning and tilt range of the fluid head.

4.2 Leveling the Tripod

The fluid head includes a built-in bubble level to assist in achieving a perfectly level setup. Adjust the tripod legs until the bubble is centered within the indicator.

4.3 Payload Capacity

The SmallRig AD-01 Video Tripod is designed to support a maximum load of 8KG (17LBS), providing stable support for various camera setups.

5. Penyelenggaraan

To ensure the longevity and optimal performance of your SmallRig AD-01 Video Tripod, follow these maintenance guidelines:

• Pembersihan: Wipe down the tripod with a soft, dry cloth after each use to remove dust and debris. For stubborn dirt, use a slightly damp kain dan kemudian keringkan dengan teliti. Elakkan bahan kimia yang keras atau pembersih yang kasar.
• Pelinciran: The fluid head is designed for smooth operation and typically does not require user lubrication. If you notice any stiffness, consult SmallRig support.
• Storan: Store the tripod in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all locks are disengaged before storage to prevent stress on the mechanisms.
• Pemeriksaan: Periodically check all screws, knobs, and leg locks for tightness. Tighten any loose components to maintain stability.

6. Penyelesaian masalah

This section addresses common issues you might encounter with your SmallRig AD-01 Video Tripod.

6.1 Ketidakstabilan Tripod

• Isu: Tripod feels wobbly or unstable.
• Penyelesaian: Ensure all leg sections are fully extended and their flip locks are securely closed. Verify that the tripod is placed on a flat, stable surface. Check the tightness of the central stabilization system.

6.2 Stiff Fluid Head Movement

• Isu: Panning or tilting movements are not smooth.
• Penyelesaian: Ensure the horizontal and vertical adjustment knobs are not overtightened. Loosen them slightly to achieve desired fluidity. If the issue persists, ensure no debris is obstructing the head's movement.

6.3 Quick Release Plate Not Securing

• Isu: The quick release plate does not lock into the fluid head.
• Penyelesaian: Ensure the side quick release button is fully depressed when inserting the plate. Make sure the plate is inserted in the correct orientation. Check for any obstructions or damage to the plate or the head's receiver.

7. Spesifikasi

8. Waranti dan Sokongan

For detailed warranty information, please refer to the warranty card included with your product or visit the official SmallRig website. SmallRig offers protection plans for extended coverage, which can be purchased separately.

If you encounter any issues or require technical assistance, please contact SmallRig customer support through their official channels. Provide your product model number (3751-SS) and a detailed description of the issue for faster service.