pengenalan
The SUNLU Filament Dryer S2 is an essential accessory for FDM 3D printers, designed to significantly improve 3D printing results by removing excess moisture from filaments. Filaments, especially when stored in humid environments or for extended periods, absorb moisture from the air. This moisture can lead to various printing issues such as clogging, stringing, brittleness, cracking, bubbling, poor adhesion, and layer shifts.
This filament dryer effectively removes moisture, restoring damp filaments to optimal condition. It can also function as a filament spool holder, allowing for continuous drying during the printing process, which is particularly beneficial in humid conditions.
Figure 1: Common 3D printing issues caused by moisture in filament.
Maklumat Keselamatan
- Ensure the device is placed on a stable, flat, and heat-resistant surface.
- Do not block the ventilation holes during operation.
- Jauhkan peranti daripada air atau cecair lain.
- Do not touch the heating elements directly when the device is in operation or immediately after use, as they can be hot.
- Cabut palam peranti daripada soket kuasa apabila tidak digunakan atau sebelum membersihkan.
- Jauhkan daripada kanak-kanak dan haiwan peliharaan.
- Gunakan hanya penyesuai kuasa yang disediakan.
Produk Selesaiview
The SUNLU Filament Dryer S2 features a user-friendly design with a large touch screen for easy operation. It incorporates 360° surround heating for efficient and even drying of filament.
Figure 2: Key features and components of the SUNLU Filament Dryer S2.
Komponen:
- Filament Dryer Unit: The main device for drying filament.
- Penyesuai Kuasa: For connecting the dryer to a power source.
- Manual Pengguna: Panduan arahan ini.
Figure 3: Packaging contents of the SUNLU Filament Dryer S2.
Persediaan
- Buka bungkusan Peranti: Carefully remove the filament dryer and all accessories from the packaging.
- Place the Dryer: Position the dryer on a stable, flat surface near your 3D printer if you intend to print directly from it.
- Insert Filament Spool: Open the lid and place your filament spool inside the dryer. Ensure the filament unwinds smoothly.
- Route Filament (if printing directly): Locate the filament outlet hole on the dryer. Pull the filament through this hole. This allows the filament to be fed directly to your 3D printer while drying.
- Sambungkan Kuasa: Find the power connector on the device and plug in the provided power adapter. Then, plug the adapter into a suitable power outlet.
Figure 4: Setup and basic operation steps.
Arahan Operasi
Menghidupkan/Mematikan:
- To turn on the dryer, double-click the power button on the touch screen.
- To turn off the dryer, double-click the power button again.
Menetapkan Suhu dan Masa:
The dryer allows customization of drying temperature and time to suit different filament types.
- Julat Suhu: 35°C hingga 70°C.
- Julat Masa: 0 hingga 99 jam.
- Use the "SET" button to navigate through the settings menu.
- Use the up and down arrow buttons to adjust values for temperature and time.
- The large LCD touch screen provides real-time display of present value (PV), setting value (SV), remaining time, and material type.
Keserasian Filamen:
The SUNLU Filament Dryer S2 is compatible with a wide range of 3D printer filaments, including but not limited to:
- PLA / PLA+
- KAYU
- PETG
- ABS / ABS+
- PVB
- PINGGUL
- nilon
- ASA
- TPU
- PMMA
- PA/PC
It supports filament diameters of 1.75mm, 2.85mm, and 3.00mm.
Figure 5: Filament compatibility and recommended drying settings.
Penyelenggaraan
- Pembersihan: Before cleaning, ensure the device is unplugged and completely cooled down. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Storan: When not in use for extended periods, store the dryer in a cool, dry place, away from direct sunlight and excessive humidity.
- Pemeriksaan Berkala: Periodically check the power cord for any damage. Ensure the filament path is clear of debris.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak dihidupkan. | Penyesuai kuasa tidak disambung dengan betul; masalah soket kuasa. | Ensure power adapter is securely plugged into the device and a working power outlet. Double-check the power button operation (double-click to turn on). |
| Filament still damp selepas kering. | Incorrect temperature/time settings; extremely damp filamen. | Increase drying time or temperature according to filament type (refer to Figure 5). For very damp filament, multiple drying cycles may be needed. Ensure the lid is properly closed. |
| Device tips over when feeding filament. | Unstable placement; excessive tension on filament. | Ensure the dryer is on a stable, level surface. Minimize tension on the filament being pulled from the dryer. Consider placing the dryer at a lower height relative to the printer. |
| Display not showing correct humidity. | Sensor calibration; environmental factors. | The built-in hygrometer provides an indication. For precise measurements, an external hygrometer may be used. Continue drying based on recommended times for filament type. |
Spesifikasi
- Dimensi Produk: 10.43 x 10.79 x 4.65 inci
- Berat Barang: 3.42 paun
- Nombor Model: SLUS-FD-S2-BK-US-NEW
- Pengeluar: SUNLU
- Suhu Kerja Maks: 70°C
- Dry Time Adjustable Range: 1-99 jam
- Dry Temperature Adjustable Range: 35-70°C
- Spesifikasi Input: AC 100V-240V, 50/60HZ
- Max Working Electricity: 1.8A
- Max Working Power: 48W
- Saiz Skrin LCD: 4.6 inci
- Keserasian Filamen: 1.75mm, 2.85mm, 3.00mm
Waranti dan Sokongan
For warranty information and technical support, please refer to the official SUNLU website or contact their customer service directly. A digital version of this user manual is available for download:
