Manual Pengguna Lengan Monitor Pegas Gas FLEXISPOT F8L

1. Pengenalan

Thank you for choosing the FLEXISPOT F8L Gas Spring Monitor Arm. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before use and keep it for future reference.

Ciri-ciri Utama:

• Detachable VESA plate for easy monitor attachment.
• Adjustable height for ergonomic viewing, reducing neck, eye, and back strain.
• Wide range of motion for tilt, swivel, and rotation, allowing optimal viewsudut-sudut.
• Compact design suitable for narrow desks, enabling side-by-side monitor placement at a distance.
• Supports VESA standards: 75x75mm and 100x100mm.
• Compatible with monitors from 17" to 36" and weighing between 2-9kg.

This image shows the FLEXISPOT F8L Gas Spring Monitor Arm in white, supporting a monitor. The arm is extended, demonstrating its adjustable nature and sleek design.

2. Arahan Keselamatan

• Pastikan semua bahagian ada dan tidak rosak sebelum pemasangan. Jangan gunakan jika mana-mana bahagian hilang atau rosak.
• Do not exceed the maximum weight capacity of 9kg (19.8 lbs) or the maximum screen size of 36 inches. Overloading can cause instability and potential injury.
• Install the monitor arm on a stable and sturdy desk surface that can support the combined weight of the arm and your monitor.
• Perform all adjustments slowly and carefully. Avoid sudden movements that could cause the monitor to swing or fall.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan pemasangan.
• If you encounter any difficulties during installation or operation, refer to the troubleshooting section or contact customer support.

3. Kandungan Pakej

Sila sahkan bahawa semua komponen disertakan dalam pakej anda:

• Perhimpunan Lengan Monitor
• Meja Clamp Pangkalan
• Tapak Pemasangan Grommet
• Plat VESA
• Kit Perkakasan (skru, pencuci, sepana Allen)
• Klip Pengurusan Kabel
• Manual Arahan

4. Persediaan dan Pemasangan

The FLEXISPOT F8L monitor arm supports two installation methods: C-clamp dan pelekap Grommet. Pilih kaedah yang sesuai untuk meja anda.

4.1 Choosing Your Mounting Method

This diagram illustrates the two primary ways to attach the monitor arm to your desk: the C-clamp method (bottom right) for desk edges and the grommet mount method (top right) for desks with existing cable holes. The grommet mount requires a hole size of 8.5-70mm, and both methods support a desk thickness of 20-100mm.

• C-Clamp Lekapkan: Ideal for desks with edges. Supports desk thickness from 20mm to 100mm.
• Gunung Grommet: Requires an existing hole in your desk (diameter 8.5mm to 70mm). Supports desk thickness from 20mm to 100mm.

4.2 Attaching the Monitor Arm to Your Desk

1. Untuk C-Clamp Lekapkan:
   • Pasangkan C-clamp base to the main pole of the monitor arm.
   • Letakkan clamp on the edge of your desk and tighten the knob until it is securely fastened.
2. Untuk Pemasangan Grommet:
   • Assemble the grommet mount base and insert it through the hole in your desk.
   • Secure it from underneath the desk using the provided plate and nut.

4.3 Memasang Monitor pada Lengan

This image demonstrates the detachable VESA plate feature. The VESA plate can be easily removed from the monitor arm, allowing you to attach it to the back of your monitor first, and then slide the monitor with the plate onto the arm for a simpler installation process.

1. Lampirkan Plat VESA ke Monitor:
   • Remove the VESA plate from the monitor arm by lifting it upwards.
   • Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
   • Secure the plate to the monitor using the appropriate screws from the hardware kit. Do not overtighten.
2. Pasangkan Monitor ke Lengan:
   • Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head until it clicks into place.
   • Ensure the monitor is securely seated before releasing itu.

5. Pengendalian dan Pelarasan

The FLEXISPOT F8L monitor arm offers a wide range of adjustments to achieve your optimal viewpengalaman dalam.

5.1 Pelarasan Ketegangan Spring Gas

The gas spring tension needs to be adjusted according to your monitor's weight to ensure smooth and stable movement. If the monitor sags or springs up too easily, adjust the tension screw located on the arm joint (often covered by a plastic cap).

• Use the provided Allen wrench to turn the screw.
• pusing mengikut arah jam to increase tension (for heavier monitors).
• pusing lawan arah jam to decrease tension (for lighter monitors).
• Adjust gradually until the monitor stays in position when released.

5.2 Monitor Position Adjustments

This diagram illustrates the extensive range of motion for the monitor arm, including 360° rotation, 180° horizontal swivel, and tilt adjustment from -90° to 15°. These features allow for precise positioning of your monitor.

• Pelarasan Ketinggian: Gently push or pull the monitor up or down to adjust its vertical position. The gas spring will hold it in place.
• Pelarasan Kecondongan: Tilt the monitor screen up or down from -90° to 15° to reduce glare and optimize viewsudut ing.
• Pelarasan Pusing: Swivel the monitor arm horizontally up to 180° to share your screen or change viewarah dalam.
• Pelarasan Putaran: Rotate the monitor 360° between landscape and portrait orientations.

This illustration compares typical poor posture when using a fixed monitor stand (left) versus the improved ergonomic posture achievable with a monitor arm (right). By allowing flexible height and angle adjustments, the monitor arm helps reduce strain on the neck, eyes, and back.

6. Penyelenggaraan

• Regularly check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Bersihkan lengan monitor dengan kain lembut,amp kain. Elakkan pembersih atau pelarut yang melelas yang boleh merosakkan kemasan.
• Do not lubricate the gas spring mechanism. It is designed to be maintenance-free.

7. Penyelesaian masalah

8. Spesifikasi

This diagram provides key dimensions of the monitor arm, including a maximum height of approximately 51cm and a maximum horizontal extension of approximately 62cm, illustrating its reach and adjustability.

9. Waranti dan Sokongan Pelanggan

FLEXISPOT provides a Waranti 1 tahun from the date of purchase for this product. This warranty covers manufacturing defects and material flaws under normal use.

For any questions, concerns, or issues regarding your FLEXISPOT F8L Gas Spring Monitor Arm, please contact our customer support team:

• e-mel: contact@flexispot.jp
• Please provide your purchase details and a description of the issue for faster assistance.