Neumann NDH 30 Open-back Studio Headphones User Manual

1. Pengenalan

The Neumann NDH 30 are circumaural, open-back studio headphones designed for demanding audio applications such as mixing and mastering. They offer high detail resolution, precise stereo imaging, and a linear soundstage for accurate audio reproduction.

This manual provides essential information for the proper use and care of your NDH 30 headphones. Please read it thoroughly before initial use.

2. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Neumann NDH 30 Open-back Studio Headphones
• Detachable Audio Cable (3.5mm jack with 6.35mm adapter)
• Manual Pengguna (dokumen ini)

Image: Neumann NDH 30 headphones neatly packed in their retail box, showcasing the product and its presentation.

3. Persediaan dan Sambungan

Follow these steps to set up your NDH 30 headphones:

1. Unpack the Headphones: Carefully remove the headphones and the audio cable from their packaging.
2. Sambungkan Kabel Audio:
   • Locate the 3.5mm jack input on the left earcup of the headphones.
   • Insert the smaller end of the detachable audio cable into this input. Ensure it is securely screwed in to prevent signal issues.
   • Connect the other end of the cable (3.5mm or 6.35mm adapter) to your audio source (e.g., audio interface, amplifier, mixing console).
   

   Imej: A terperinci view of the detachable audio cable being connected to the 3.5mm jack on the left earcup of the NDH 30 headphones.

   

   Image: The detachable audio cable, showing both the 3.5mm connector and the screw-on 6.35mm adapter for versatile connectivity.
3. Laraskan untuk Keselesaan: Extend or retract the headband to fit your head comfortably. The earcups should fully enclose your ears without excessive pressure.

4. Arahan Operasi

The NDH 30 headphones are designed for critical listening tasks. Here are some guidelines for optimal use:

• Kawalan Kelantangan: Always start with a low volume level on your audio source and gradually increase it to a comfortable listening level. Avoid excessively high volumes to protect your hearing.
• Open-Back Design: As open-back headphones, the NDH 30 allows some sound to escape and some ambient sound to enter. This design contributes to a natural, spacious soundstage, ideal for mixing and mastering in quiet environments. They are not designed for noise isolation.
• Penggunaan yang Dimaksudkan: These headphones are optimized for professional audio monitoring, editing, and mixing. Their linear frequency response and transient accuracy provide a reliable reference for sound engineers and producers.
• Mekanisme Lipatan: The headphones feature a foldable design for easy storage and transport. Carefully fold the earcups inwards towards the headband when not in use.

Image: The Neumann NDH 30 headphones shown in their folded configuration, highlighting their portability and compact storage design.

Image: A user wearing the Neumann NDH 30 headphones, engaged in audio work at a computer workstation, demonstrating typical usage.

5. Penyelenggaraan dan Penjagaan

To ensure the longevity and optimal performance of your NDH 30 headphones, follow these maintenance guidelines:

• Pembersihan: Use a soft, dry cloth to clean the exterior surfaces of the headphones. For ear pads, gently wipe with a slightly damp cloth if necessary, and allow to air dry completely. Do not use harsh chemicals or abrasive cleaners.
• Storan: When not in use, store the headphones in a clean, dry place, preferably in their original box or a protective case. Avoid exposing them to extreme temperatures, humidity, or direct sunlight.
• Penjagaan Kabel: Handle the detachable cable with care. Avoid sharp bends or excessive pulling. Always grasp the connector, not the cable, when plugging or unplugging.
• Penggantian Pad Telinga: Over time, ear pads may show wear. Replacement ear pads are available from authorized Neumann dealers. Refer to the Neumann website for instructions on how to replace them.

6. Penyelesaian masalah

If you encounter issues with your NDH 30 headphones, refer to the following common problems and solutions:

• Tiada Bunyi atau Audio Sekejap-sekejap:
  • Ensure the audio cable is securely connected to both the headphone earcup and the audio source. The cable connector on the headphone side should be screwed in properly.
  • Check the volume level on your audio source and ensure it is not muted.
  • Test the headphones with a different audio source or device to rule out issues with the source.
  • Inspect the audio cable for any visible damage. If damaged, replace it with an official Neumann replacement cable.
• Bunyi Herot:
  • Reduce the volume level on your audio source. Distortion can occur if the signal is too strong.
  • Ensure the audio cable is fully inserted and securely connected. A loose connection can cause distortion or phase issues.
  • Test with another audio source to determine if the distortion originates from the source device.
• Kesesuaian Tidak Selesa:
  • Adjust the headband length until the earcups sit comfortably over your ears.
  • Ensure the earcups are positioned correctly, fully enclosing your ears.

If the problem persists after trying these steps, please contact Neumann customer support.

7. Spesifikasi

8. Waranti dan Sokongan

Neumann products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Neumann webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

For technical support, spare parts, or service inquiries, please contact Neumann customer service through their official website or an authorized dealer. You can find contact information and FAQs on the Neumann Store page.