Manual Pengguna Pengawal Suhu Pemanasan Termostat Paparan LCD MC701

1. Produk Lebihview

The SINOTIMER MC701 is a versatile digital PID temperature controller designed for precise heating and cooling applications. It features an LCD display, supports various input types including PT100 and K-type thermocouples, and provides SSR/Relay output with alarm functions. This manual provides essential information for the safe and effective operation of your MC701 controller.

Rajah 1.1: Depan view of the MC701 controller showing the PV and SV displays, and control buttons.

Rajah 1.2: Bersudut view of the MC701 controller, highlighting the model number (MC701-611) and default input type (K).

2. Ciri-ciri Utama

• High-precision digital PID temperature control.
• Dual LCD display for Process Value (PV) and Set Value (SV).
• Supports multiple input types: K-type thermocouple, PT100 RTD.
• SSR (Solid State Relay) and Relay output options.
• Configurable heating and cooling control modes.
• Integrated alarm functions (ALM1, ALM2).
• Temperature unit selection: Celsius (°C) or Fahrenheit (°F).

3. Maklumat Keselamatan

Sila baca dan fahami semua arahan keselamatan sebelum pemasangan dan pengendalian. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

• Pastikan bekalan kuasa voltage matches the controller's specifications (100-240V AC).
• Semua pendawaian hendaklah dilakukan oleh juruelektrik yang bertauliah.
• Disconnect power before making any wiring connections or performing maintenance.
• Do not operate the controller in environments with excessive moisture, dust, or corrosive gases.
• Pastikan pengudaraan yang betul untuk mengelakkan terlalu panas.
• This device is not intended for life-support systems or applications where malfunction could lead to severe injury or property damage.

4. Persediaan dan Pemasangan

Proper installation is crucial for the accurate and reliable operation of the MC701 controller.

4.1 Pemasangan

The MC701 is designed for panel mounting. Ensure adequate space for ventilation and wiring connections.

Figure 4.1: MC701 controller shown with its included mounting clips for panel installation.

4.2 Sambungan Pendawaian

Refer to the wiring diagram on the side of the unit and the instructions below for correct connections. Use appropriate gauge wires for all connections.

Figure 4.2: Detailed wiring diagram on the side of the MC701 unit, showing connections for power, sensor input, SSR, and relay outputs.

• Power Supply (85-265VAC): Connect to terminals 8 and 9.
• SSR Output (OUT): Connect to terminals 10 (+) and 11 (-).
• Relay Output (RELAY): Connect to terminals 13 (NO - Normally Open) and 14 (NC - Normally Closed). Terminal 12 is the common (COM).
• RTD Input (PT100): Connect to terminals 4 (A), 5 (B), and 6 (B).
• Thermocouple Input (TC): Connect to terminals 5 (+) and 6 (-).
• Alarm Outputs (AL1, AL2): Connect to terminals 1, 2, and 3.

5. Arahan Operasi

5.1 Paparan Terlaluview

The MC701 features a dual display:

• PV (Process Value): Displays the current measured temperature.
• SV (Set Value): Displays the desired target temperature.

Lampu penunjuk:

• OUT: Indicates output status (heating/cooling).
• AT: Auto-tuning indicator.
• ALM1, ALM2: Alarm indicators.

5.2 Fungsi Butang

• SET: Enters parameter setting mode or confirms a setting.
• < (R/S): Shifts cursor during setting, or resets alarm.
• V (Down Arrow): Decreases value during setting.
• ^ (Up Arrow): Increases value during setting.

5.3 Menetapkan Suhu Sasaran (SV)

1. Tekan ke SET butang sekali. Paparan SV akan mula berkelip.
2. Gunakan ^ dan V butang untuk melaraskan suhu yang dikehendaki.
3. Gunakan < button to shift the cursor for faster adjustment.
4. Tekan SET sekali lagi untuk mengesahkan SV baharu dan keluar dari mod tetapan.

5.4 Tetapan Parameter Lanjutan

To access advanced parameters (e.g., PID parameters, alarm settings, input type, temperature unit), press and hold the SET button for several seconds until the first parameter code appears on the PV display.

• guna ^ dan V to navigate through parameters.
• Tekan SET kepada view or edit a parameter's value.
• Laraskan nilai menggunakan ^, V, dan <.
• Tekan SET to save the value and return to the parameter list.
• To exit advanced settings, press and hold SET again, or wait for a timeout.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your MC701 controller.

• Cleaning: Wipe the display and casing dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
• Ventilation: Ensure the ventilation slots on the sides of the unit are not obstructed to prevent overheating.
• Connections: Periodically check all wiring connections for tightness and signs of wear or corrosion.
• Storage: If storing the unit, keep it in a dry, dust-free environment within its specified operating temperature range.

7. Penyelesaian masalah

8. Spesifikasi

Rajah 8.1: Sisi view of the MC701 controller displaying its detailed specification label.

9. Waranti dan Sokongan

For technical support or warranty inquiries, please contact SINOTIMER customer service through the retailer or the official SINOTIMER website. Please have your product model number (MC701) and purchase details ready.

This product is manufactured by SINOTIMER.