1. Pengenalan
This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your GoolRC Flysky FS-G7P 7-channel RC Transmitter and FS-R7P Receiver. This 2.4GHz remote control system is designed for various RC models, including cars and boats, offering reliable and precise control.
Image 1.1: The GoolRC Flysky FS-G7P 7CH RC Transmitter and FS-R7P Receiver. This image displays the transmitter unit, the compact FS-R7P receiver, and a battery voltage detection (BVD) harness.
2. Ciri-ciri Utama
The GoolRC Flysky FS-G7P system incorporates several features designed to enhance your RC experience:
- Mixed Control Capability: The transmitter supports 20 model memory slots and allows for customizable channel assignments to switches and knobs. This enables mixed control for various RC models, including climbing vehicles, crawlers, cars, boats, and robots.
- Antara Muka Mesra Pengguna: A widescreen user interface provides direct display of operational information, simplifying tasks such as code matching and BVD voltage calibration. The integrated single antenna design contributes to durability.
- 4WS Crawler Special Mixer: Includes four dedicated climbing vehicle modes. This mixing function is specifically designed for dual-engine models like tracked vehicles and dual-motor boats, offering adjustable mixing ratios.
- Extended Range and Stability: Provides a control range exceeding 300 meters with stable signal transmission, supporting simultaneous operation of multiple units in a single area.
- Broad Receiver Compatibility: Compatible with all FUCHS ANT protocol receivers. The system's software includes direction mixing and five programmable mixing groups for versatile control across different RC models.
- Port Data Jenis-C: Equipped with a Type-C data port for firmware upgrades, external power supply, and direct connection to RC simulators and racing games (e.g., VRC, F1 2018/2019, SANS, Spinning Tire, Eurocar) via USB.
Imej 2.1: Selesaiview of the FS-G7P transmitter's functions, including model data storage, beginner mode, timer, rate and curve adjustments, servo frequency, receiver firmware updates, channel expansion, SVC function, factory reset, and stick calibration.
Image 2.2: Illustration of the FS-G7P's user interface design, highlighting its widescreen display and ease of navigation for various settings.
Image 2.3: Depiction of the Type-C data port on the FS-G7P, indicating its use for firmware upgrades, external power, and simulator connections.
3. Produk Lebihview
3.1. FS-G7P Transmitter Components
Image 3.1: Detailed diagram of the FS-G7P RC Transmitter, labeling its various controls and ports.
- paparan: LCD screen for displaying settings and telemetry data.
- SW1 Key: Suis pengunci sendiri.
- VR1 Knob: Virtual Reality 1 knob.
- Five-way switch: Used for menu navigation (Up, Down, Left, Right, Enter/OK).
- CH1: Traversing handwheel.
- Ambient LED: Lampu penunjuk.
- SW2: Tact switch/key.
- TR1: Function adjustment.
- SW3: Three-position toggle switch.
- Suis bekalan kuasa.
- Virtual Reality 2: Three-position knob.
- CH2: Throttle trigger.
- Kotak bateri: Accommodates four AA batteries, compatible with 2S lithium batteries.
- Type C USB interface: For firmware upgrades, USB emulator, and system power supply.
- Fixed port for the holder of a mobile phone.
- JST interface: For power supply through 2S lithium battery.
3.2. FS-R7P Receiver Components
Image 3.2: Detailed diagram of the FS-R7P Receiver, showing its ports and connections.
- CH1/P(PWM/PPM): Channel 1 output (PWM/PPM).
- CH2-CH5: Channels 2 through 5 outputs.
- BIND interface: Port for binding the receiver to the transmitter.
- BVD/VCC: Bateri voltage detection/Power supply interface.
- CH7: Channel 7 output.
- SERVO: Servo connection port.
- LED: Lampu penunjuk status.
- Antena: Receiver antenna.
- BIND button: Button for initiating the binding process.
- SENS interface: Sensor interface.
- CH6: Channel 6 output.
- Signal pin.
- + (Power anode).
- - (Power cathode).
- BVD harness: Untuk bateri voltagpengesanan e.
- Connect to battery anode.
- Connect to battery cathode.
Nota: BVD voltagJulat pengesanan e ialah 0-70V.
4. Persediaan
4.1. Pemasangan Bateri (Pemancar)
The FS-G7P transmitter requires four AA batteries. Alternatively, a 2S lithium battery can be used via the JST interface for power supply. Ensure correct polarity when inserting batteries.
Imej 4.1: View of the FS-G7P transmitter's battery compartment, illustrating support for 2S lithium batteries (not included).
4.2. Mengikat Pemancar dan Penerima
To establish communication between the FS-G7P transmitter and FS-R7P receiver, follow these binding steps:
- Pastikan kedua-dua pemancar dan penerima dimatikan.
- Connect the binding plug (not included, typically a jumper) to the BIND interface on the FS-R7P receiver.
- Hidupkan penerima. LED pada penerima sepatutnya berkelip, menunjukkan ia berada dalam mod pengikatan.
- While holding down the BIND button on the FS-G7P transmitter (refer to Image 3.1, item 12), power on the transmitter.
- The LED on the receiver should become solid, indicating successful binding.
- Power off both the transmitter and receiver. Remove the binding plug from the receiver.
- Power on the transmitter first, then the receiver. The receiver LED should be solid, confirming a successful connection.
4.3. Konfigurasi Awal
After binding, you may need to configure basic settings:
- Pemilihan Model: Use the transmitter's display and five-way switch to select or create a new model profile. The FS-G7P supports 20 model memory slots.
- Tugasan Saluran: Assign functions to the various switches and knobs (SW1, VR1, SW3, TR1) as desired for your specific RC model.
- Penentukuran: Perform throttle and steering calibration if necessary to ensure accurate control response.
5. Arahan Operasi
5.1. Kawalan Asas
The primary controls for your RC model are the steering wheel (CH1) and the throttle trigger (CH2).
- Stereng (CH1): Rotate the handwheel left or right to control the steering of your model.
- Pendikit (CH2): Pull the trigger towards you for forward movement and push it away for reverse or braking.
5.2. Fungsi Lanjutan
The FS-G7P offers advanced mixing and programming options:
- Mixed Control: Utilize the programmable mixing groups to combine control inputs for complex models. Refer to the transmitter's menu for setting up direction mixing and the five programming mixing groups.
- 4WS Crawler Modes: Access the four dedicated crawler modes for enhanced control of 4-wheel steering vehicles. Adjust mixing amounts as needed for optimal performance.
- Pelarasan Trim: Use the TR1 function adjustment to fine-tune steering and throttle neutral positions.
Image 5.1: Diagram illustrating the reasonable layout of controls on the FS-G7P transmitter, including knobs, switches, and the five-way switch for menu navigation.
6. Penyelenggaraan
- Pembersihan: Regularly clean the transmitter and receiver with a soft, dry cloth. Avoid using solvents or harsh chemicals.
- Storan: Simpan unit ini di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau. Tanggalkan bateri jika disimpan untuk tempoh yang lama.
- Kemas kini Firmware: Periodically check the GoolRC or Flysky official website for firmware updates. Use the Type-C data port to update the transmitter's firmware as instructed by the manufacturer.
- Penjagaan Bateri: Ensure batteries are charged appropriately and replaced when their performance degrades.
Image 6.1: Screenshot of the FlySky Assistant 3.0 software interface, used for firmware upgrades, model data storage, and copying.
7. Penyelesaian masalah
If you encounter issues with your FS-G7P system, consider the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No power to transmitter/receiver | Bateri mati atau tidak dipasang dengan betul. | Check battery polarity, replace with fresh batteries, or ensure 2S LiPo is connected correctly. |
| No control response / Glitching | Unbound units, interference, low battery voltage, faulty servo/ESC. | Re-bind the transmitter and receiver. Ensure sufficient battery power. Check all connections. Test components individually if possible. |
| Throttle/Steering twitchy or unstable | Interference, incorrect calibration, faulty servo. | Ensure no strong interference sources nearby. Re-calibrate throttle and steering. Check servo connections and function. |
| Servos burning out | Lebih-voltage, incorrect wiring, faulty servo. | Sahkan bekalan kuasa voltage is within receiver/servo limits. Double-check all wiring. Replace suspected faulty servos. |
| Unable to connect to simulator | Incorrect USB cable, driver issues, software settings. | Ensure you are using a compatible Type-C USB cable. Install necessary drivers. Check simulator software settings for controller input. |
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | GoolRC |
| Model | FS-G7P (Transmitter), FS-R7P (Receiver) |
| Saluran | 7 Saluran |
| Kekerapan | 2.4GHz |
| Jarak Kawalan | Lebih 300 meter (984 kaki) |
| Berat Pemancar | Lebih kurang 305g (0.67 paun) |
| Berat Penerima | Lebih kurang 8g (0.02 paun) |
| BVD Voltage Julat Pengesanan | 0-70V |
| Penggunaan Kuasa | 0.6W (provides over 10 hours of operation on full charge) |
| Bekalan Kuasa Pemancar | 4x AA batteries or 2S Lithium battery |
| Keserasian Penerima | All FUCHS ANT protocol receivers (e.g., FS-R4P, FS-R4B, HW-709, HW-711) |
| Nombor Model Item | UYA8730971786978GT |
| Umur Disyorkan Pengilang | 14 tahun dan ke atas |
| Dimensi Pakej | 8.39 x 6.69 x 4.84 inci |
| Berat Barang (Pakej) | 1.1 paun |
Image 8.1: Dimensional drawing of the FS-G7P transmitter and FS-R7P receiver, showing their physical sizes and weights.
Image 8.2: Diagram illustrating the compatibility of the FS-R7P receiver with various other ANT protocol receivers, including FS-R4P, FS-R4B, HW-709, and HW-711.
9. Waranti dan Sokongan
For specific warranty information, please refer to the documentation provided with your purchase or contact the seller directly. GoolRC provides ongoing support through firmware updates available via the Type-C data port, ensuring your system remains up-to-date with the latest features and improvements.
