pengenalan
Thank you for choosing the HMF Small Safe. This practical safe is designed for secure storage of cash, valuables, and important documents in various settings such as hotels, shops, or your home. It features an individually programmable electronic lock with a 3 to 8 digit code and a robust double bolt locking mechanism. Constructed from single-layer steel with 1mm thick walls and 3mm thick doors, it is powder-coated in an anthracite finish for durability.
Rajah 1: The HMF Small Safe with its door open, revealing the electronic keypad and the spacious interior. The safe is designed for secure storage of valuables.
Persediaan
1. Pemasangan Bateri
The safe requires 4 AA batteries (not included) to power the electronic lock. Open the battery compartment located on the inside of the safe door, typically behind a small cover. Insert the batteries, ensuring correct polarity (+/-). Close the compartment. The safe will emit a beep, indicating successful power-up.
2. Initial Code Setting
Upon first use, or after battery replacement, you will need to set your personal access code. The factory default code is usually "159".
- With the door open, press the red reset button located on the inside of the door, near the hinge. You will hear a beep.
- Dalam masa 5 saat, masukkan kod 3 hingga 8 digit yang anda inginkan pada pad kekunci.
- Press the "#" button to confirm. You will hear a confirmation beep.
- Uji kod baharu dengan pintu terbuka untuk memastikan ia berfungsi dengan betul sebelum menutup peti besi.
Rajah 2: Terperinci view of the electronic keypad, showing the number buttons and indicator lights for battery status and lock operation.
3. Memasang Peti Keselamatan
For enhanced security, the safe can be mounted to a wall or floor. Pre-drilled holes are provided on the back and bottom of the safe. Mounting hardware (2 metal anchors, 2 fixing screws) is included.
- Pilih lokasi yang sesuai untuk pemasangan.
- Mark the drilling points on the wall or floor using the safe's pre-drilled holes as a template.
- Drill holes of appropriate size and depth for the provided anchors.
- Masukkan sauh ke dalam lubang yang digerudi.
- Align the safe with the anchors and secure it using the fixing screws. Ensure the safe is firmly attached.
Rajah 3: The safe's rear panel with pre-drilled mounting holes, alongside the included metal anchors and screws for secure installation.
Arahan Operasi
1. Membuka Peti Keselamatan dengan Kod Anda
- Enter your personal 3 to 8 digit code on the keypad.
- Press the "#" button.
- If the code is correct, the green "OPEN" light will illuminate, and you will hear a beep.
- Dalam masa 5 saat, putar tombol mengikut arah jam untuk membuka pintu selamat.
2. Menutup dan Mengunci Peti besi
Close the safe door and turn the knob counter-clockwise until the bolts are fully extended and the door is securely locked. There is no need to enter the code to lock the safe.
3. Using the Emergency Key
In case of forgotten code, battery failure, or electronic malfunction, you can use the emergency key to open the safe.
- Locate the emergency keyhole, usually hidden behind a small cover on the keypad panel.
- Insert the emergency key and turn it counter-clockwise while simultaneously turning the knob clockwise to open the door.
- Keep the emergency keys in a secure location, separate from the safe.
Rajah 4: The emergency key inserted into its hidden lock on the keypad, providing an alternative method to open the safe.
Penyelenggaraan
1. Penggantian Bateri
When the "LOW BATTERY" indicator light illuminates, or if the keypad becomes unresponsive, it's time to replace the batteries. Use 4 new AA batteries. Follow the battery installation steps in the "Setup" section. It is recommended to replace batteries annually, even if the low battery indicator has not yet appeared, to ensure optimal performance.
2. Pembersihan
Bersihkan bahagian luar peti besi dengan lembut, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the keypad and lock mechanism are kept free of dust and debris.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peti besi tidak boleh dibuka dengan kod. | Incorrect code entered; Low batteries; Electronic malfunction. | Re-enter code carefully. Replace batteries. Use emergency key. |
| "LOW BATTERY" light is on. | Bateri hampir habis. | Gantikan semua 4 bateri AA dengan segera. |
| Pad kekunci tidak bertindak balas. | Dead batteries; Electronic malfunction. | Replace batteries. Use emergency key. Contact customer support if issue persists. |
| Pintu tidak ditutup dengan betul. | Obstruction in door frame; Bolts not retracting fully. | Check for obstructions. Ensure knob is turned fully to retract bolts before closing. |
Spesifikasi
- model: HMF 46126-11
- External Dimensions (W x H x D): 23 x 17 x 17 cm (9.06 x 6.69 x 6.69 inci)
- Internal Dimensions (W x H x D): 22.5 x 16.5 x 16.5 cm (8.86 x 6.50 x 6.50 inches) - Suitable for DIN A5 documents.
- Berat: 2.55 kg (5.62 lbs)
- Bahan: Keluli Aloi, Logam
- Jenis Kunci: Electronic Combination Lock (3-8 digits) with Double Bolt
- Jenis Pemasangan: Wall Mount (pre-drilled holes)
- Ciri Khas: Mudah alih
- Komponen yang Disertakan: Safe, 2 Emergency Keys, 2 Metal Anchors, 2 Fixing Screws, 1 Instruction Manual
Rajah 5: Visual representation of the safe's external dimensions (23x17x17 cm) and internal capacity (22.5x16.5x16.5 cm), suitable for A5 documents.
Waranti dan Sokongan
HMF products are designed for durability and reliability. For any questions, technical support, or warranty inquiries, please contact HMF customer service. Please refer to your purchase documentation for specific warranty terms and conditions.
Pengeluar: HMF
For further assistance, please visit the official HMF webtapak atau hubungi peruncit anda.
