HMF 46126-11 Small Safe with Electronic Combination Lock

1. Pengenalan

This manual provides essential instructions for the proper installation, operation, and maintenance of your HMF 46126-11 Small Safe. Designed for securing cash, valuables, and documents, this safe features a robust steel construction and an electronic combination lock for reliable protection. Please read this manual thoroughly before using the safe to ensure optimal performance and security.

Image 1.1: The HMF 46126-11 small safe, featuring its electronic keypad and emergency lock. The keypad includes a low battery warning indicator.

2. Maklumat Keselamatan

• Do not store the emergency keys inside the safe. Keep them in a secure, separate location.
• Elakkan daripada mendedahkan peti keselamatan kepada suhu atau kelembapan yang melampau.
• Pastikan peti besi dipasang dengan selamat untuk mengelakkan pengalihan yang tidak dibenarkan.
• Change the factory default code immediately after initial setup.
• Do not use abrasive cleaners on the safe's surface.

3. Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• 1 x HMF 46126-11 Small Safe
• 2 x Kunci Kecemasan
• 2 x Sauh Logam
• 2 x Membetulkan Skru
• 1 x Manual Pengguna

4. Produk Lebihview

Imej 4.1: Dalaman view of the safe, showing space for A5 documents and small valuables, along with integrated key hooks on the door.

Image 4.2: Close-up of the electronic keypad, featuring number buttons, a rotary knob for opening, and indicator lights.

5. Pemasangan

5.1 Memilih Lokasi

Select a discreet and secure location for your safe. It can be mounted to a wall or floor. Ensure the surface is solid enough to support the safe's weight and resist tampering.

5.2 Arahan Pemasangan

The safe features pre-drilled holes for easy installation. Use the provided metal anchors and fixing screws to secure the safe.

1. Letakkan peti besi di lokasi yang dikehendaki.
2. Tandakan titik penggerudian melalui lubang pra-gerudi di bahagian belakang atau bawah peti besi.
3. Drill holes into the wall or floor using an appropriate drill bit (not included).
4. Insert the metal anchors into the drilled holes.
5. Align the safe with the anchors and secure it using the fixing screws. Tighten firmly.

Image 5.1: The safe's pre-drilled holes for wall or floor mounting, along with the included fixing hardware.

Imej 5.2: Belakang view of the safe, highlighting the pre-drilled holes for secure installation.

6. Persediaan Awal

6.1 Membuka Peti Besi untuk Kali Pertama

Upon receiving your safe, it will be locked. Use one of the provided emergency keys to open it for the first time.

1. Locate the emergency keyhole, usually hidden behind a small cover on the keypad panel.
2. Insert an emergency key and turn it clockwise.
3. While the key is turned, rotate the knob on the keypad counter-clockwise to open the safe door.

Image 6.1: Demonstrates inserting the emergency key into the hidden keyhole to unlock the safe.

6.2 Pemasangan Bateri

The electronic lock requires batteries (typically AA, not always included). The battery compartment is usually located on the inside of the safe door.

1. Buka pintu selamat menggunakan kunci kecemasan.
2. Locate the battery compartment cover on the inside of the door.
3. Remove the cover and insert the required batteries, ensuring correct polarity (+/-).
4. Gantikan penutup petak bateri.

6.3 Setting Your Personal Combination Code

It is crucial to set your personal code immediately after installing batteries. The code can be 3 to 8 digits long.

1. Dengan pintu selamat terbuka, tekan butang set semula merah yang terletak di bahagian dalam pintu, berhampiran engsel. Anda akan mendengar bunyi bip.
2. On the keypad, enter your desired 3 to 8 digit code.
3. Press the '#' button to confirm. You will hear a confirmation beep.
4. Test the new code with the door open before closing it. Enter your code, then rotate the knob counter-clockwise.

Image 6.2: A hand demonstrating the process of entering a personal access code on the electronic keypad.

7. Operasi

7.1 Membuka Peti Besi dengan Kod Anda

1. Enter your personal 3 to 8 digit code on the keypad.
2. Press the '#' button. The green light will illuminate, and you will hear a beep.
3. Within 5 seconds, rotate the knob counter-clockwise to open the door.

7.2 Menutup dan Mengunci Peti besi

1. Tutup pintu selamat.
2. Rotate the knob clockwise to engage the locking bolts. The safe is now secured.

7.3 Emergency Opening

In case of forgotten code or dead batteries, you can use the emergency keys.

1. Locate the emergency keyhole (refer to Section 6.1).
2. Insert an emergency key and turn it clockwise.
3. While the key is turned, rotate the knob counter-clockwise to open the safe door.

8. Penyelenggaraan

8.1 Penggantian Bateri

When the 'LOW BATTERY WARNING' indicator lights up or the safe fails to open with the code, it's time to replace the batteries.

1. Open the safe using the emergency key (if batteries are completely dead).
2. Replace all batteries in the compartment (refer to Section 6.2).
3. Test the electronic lock with your code after replacement.

8.2 Pembersihan

Lap bahagian luar peti besi dengan lembut, damp cloth. Do not use harsh chemicals or abrasive materials, as they can damage the finish or electronic components.

8.3 Key Care

Keep emergency keys in a safe, accessible location outside the safe. Avoid bending or damaging the keys.

9. Penyelesaian masalah

10. Spesifikasi

Image 10.1: Visual representation of the safe's external dimensions (23x17x17 cm) and internal capacity, suitable for A5 documents.

11. Waranti dan Sokongan

Your HMF safe is manufactured with quality and durability in mind. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or inquiries, please contact HMF customer service through the official website or your point of purchase. Please have your model number (46126-11) ready when contacting support.