1. Produk Lebihview
This manual provides essential information for the installation and maintenance of your maXpeedingrods 2.5" Front and 0.5" Rear Suspension Lift Spacer Kit. This kit is specifically designed to enhance the ground clearance and accommodate larger tires on Jeep Grand Cherokee WK2 models manufactured between 2011 and 2022. Please note, this kit is not compatible with vehicles equipped with air-ride suspension or Quadra-Lift air suspension systems.
2. Ciri-ciri Produk
- Kelengkapan: Designed for Jeep Grand Cherokee WK2 2011-2022 models. Excludes vehicles with air-ride or Quadra-Lift air suspension.
- Ketinggian Angkat: Provides approximately 2.5 inches of lift at the front and 0.5 inches at the rear. This increased height allows for fitting larger tires, up to 33 inches.
- Bahan: Lift spacers are constructed from high-strength steel, featuring a durable powder coating finish for enhanced resistance against rust and corrosion, ensuring extended service life.
- Pemasangan: Strut spacers are designed for direct bolt-on installation to the top of the front struts.
- Sokongan: maXpeedingrods offers lifetime technical support and a 1-year limited warranty for quality-related issues from the date of purchase.
3. Apa yang ada di dalam Kotak
The maXpeedingrods 2.5" Front & 0.5" Rear Lift Kit includes the following components:
- Front Strut Spacers (Quantity: 2)
- Rear Coil Spacers (Quantity: 2)
- Brake Line Relocation Brackets (Quantity: 2)
- Semua perkakasan pemasangan yang diperlukan (bolt, nat, pencuci)
4. Arahan Pemasangan (Persediaan)
Installation of this lift kit requires mechanical knowledge and appropriate tools. If you are not confident in performing the installation yourself, it is recommended to seek professional assistance. A detailed PDF installation manual is available for download to guide you through each step.
4.1 Pertimbangan Penting
- Suspension Geometry: The actual lift height achieved may differ from the physical thickness of the spacers due to suspension geometry. For example, a 1.54-inch spacer may result in a 2.5-inch lift.
- Keserasian Kenderaan: Ensure your vehicle is a Jeep Grand Cherokee WK2 (2011-2022) and does NOT have air-ride or Quadra-Lift air suspension.
- Selepas Pemasangan: After installation, a professional wheel alignment is highly recommended to ensure proper vehicle handling and tire wear.
4.2 Langkah Pemasangan Umum (Ringkasan)
- Angkat kenderaan dengan selamat dan sokong pada dirian bicu.
- Tanggalkan roda hadapan.
- Disassemble the factory front strut assembly.
- Install the front strut spacers on top of the factory struts.
- Reinstall the modified strut assembly.
- Tanggalkan roda belakang.
- Install the rear coil spacers.
- Install the brake line relocation brackets.
- Reinstall the rear wheels.
- Lower the vehicle and perform a final torque check on all fasteners.
- Arrange for a professional wheel alignment.
4.3 Video Produk Rasmi
Untuk selesai jeneralview of maXpeedingrods' commitment to performance and product quality, please watch the following video:
5. Spesifikasi
| Atribut | Nilai |
|---|---|
| Jenama | maXpeedingrods |
| Kedudukan Bahagian Auto | Depan, Belakang |
| bahan | Keluli Aloi |
| Komponen yang Disertakan | Strut spacers, Coil spacers, Hardware |
| Ketinggian Pengangkatan Maksimum | 2.5 Inches (Front) |
| Berat Barang | 15.87 paun |
| Dimensi Produk | 12.99 x 9.06 x 5.51 inci |
| Nombor Bahagian Pengilang | IE54KL |
6. Penyelenggaraan
Regular maintenance is crucial for the longevity and safe operation of your lift kit and vehicle suspension. Perform the following checks periodically:
- Tork Pengikat: Re-check the torque on all bolts and nuts installed with the lift kit after the first 500 miles of driving, and then every 5,000 miles or during routine vehicle servicing.
- Pemeriksaan Komponen: Visually inspect all lift kit components for any signs of wear, damage, or corrosion. Pay close attention to the spacers, bolts, and brake line brackets.
- Suspension Alignment: Monitor tire wear for any uneven patterns, which may indicate a need for re-alignment.
- Pembersihan: Keep the suspension components clean, especially after off-road driving, to prevent accumulation of dirt and debris that could accelerate wear or corrosion.
7. Penyelesaian masalah
If you encounter any issues after installing the lift kit, consider the following common troubleshooting steps:
- Ketinggian Tunggangan Tidak Sekata: Double-check that all spacers are correctly installed and seated. Verify that the correct spacers were used for the front and rear.
- Bunyi Luar Biasa (Berdentum, Berdecit): Inspect all fasteners for proper torque. Ensure no components are rubbing against each other or the vehicle frame. Check for any loose or damaged suspension parts.
- Masalah Pengendalian atau Stereng yang Lemah: This often indicates a need for a professional wheel alignment. Ensure all suspension components are correctly installed and functioning.
- Menggosok Tayar: Confirm that the tire size is within the recommended limits for the lift kit. Inspect for any specific areas of contact and ensure all components are properly positioned.
If problems persist after these checks, please contact maXpeedingrods customer support for further assistance.
8. Waranti dan Sokongan
maXpeedingrods komited untuk menyediakan produk berkualiti tinggi dan perkhidmatan pelanggan yang cemerlang.
- Waranti: Produk ini didatangkan dengan jaminan terhad 1 tahun yang meliputi isu berkaitan kualiti dari tarikh pembelian.
- Sokongan Teknikal: Sokongan teknikal seumur hidup tersedia untuk semua produk maXpeedingrods.
- Hubungi: For any questions, technical assistance, or warranty claims, please contact maXpeedingrods customer support. Refer to your product packaging or the official maXpeedingrods webtapak untuk maklumat hubungan semasa.
