3nStar RPT006 Thermal Receipt Printer User Manual (USB+ETH+WiFi)

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the 3nStar RPT006 Thermal Receipt Printer, specifically the USB+Ethernet+Wi-Fi model. Please read this manual thoroughly before using the printer to ensure proper functionality and to prevent damage.

2. Maklumat Keselamatan

• Ensure the printer is connected to a grounded power outlet.
• Jangan dedahkan pencetak kepada air atau kelembapan yang berlebihan.
• Elakkan meletakkan pencetak di bawah cahaya matahari langsung atau berhampiran sumber haba.
• Gunakan hanya penyesuai kuasa yang dibekalkan bersama pencetak.
• Jangan cuba membuka atau membaiki pencetak sendiri. Hubungi kakitangan servis yang berkelayakan.
• Jauhkan daripada kanak-kanak.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Pencetak Resit Terma 3nStar RPT006
• Kord Kuasa
• Penyesuai AC
• Kabel USB
• USB Jenis-C ke Penyesuai Jenis-A
• Sample Roll of Thermal Paper
• USB Drive (containing Drivers, Manuals, and Tutorials)

4. Produk Lebihview

Familiarize yourself with the printer's components and indicators.

4.1 Depan View

Rajah 1: Depan view of the 3nStar RPT006 printer, showing the paper output slot and control panel with FEED, PAPER, ERROR, and POWER indicators.

4.2 Top Angled View

Rajah 2: Angled top-front view of the 3nStar RPT006 printer, highlighting the compact design and control panel.

4.3 Bahagian View

Rajah 3: sebelah view of the 3nStar RPT006 printer, illustrating its compact form factor.

4.4 Rear Angled View

Rajah 4: Angled rear-top view of the 3nStar RPT006 printer, showing the power switch and connectivity ports (not clearly visible but implied location).

4.5 Penunjuk Panel Kawalan

• Butang FEED: Press to advance paper.
• PAPER Indicator: Lights up when paper is present, flashes when paper is low, off when no paper.
• Penunjuk RALAT: Lights up or flashes to indicate various errors (e.g., paper jam, print head overheat).
• Penunjuk KUASA: Menyala apabila pencetak dihidupkan.

5. Persediaan

5.1 Membongkar dan Meletakkan

1. Tanggalkan pencetak dan semua aksesori daripada pembungkusan dengan berhati-hati.
2. Place the printer on a stable, flat surface. Ensure adequate ventilation around the printer.

5.2 Kuasa Penyambung

1. Connect the AC adapter to the printer's power input port.
2. Sambungkan kabel kuasa ke penyesuai AC.
3. Palamkan kord kuasa ke salur keluar elektrik yang dibumikan.
4. Ensure the printer's power switch (located at the rear/side) is in the OFF position before connecting power.

5.3 Memuatkan Kertas Terma

Rajah 5: Printer with the top cover open, illustrating the drop-in paper loading area.

1. Open the printer's top cover by pressing the cover release latch (if present) or lifting the cover directly.
2. Insert a new roll of 80mm thermal paper into the paper compartment. Ensure the paper feeds from the bottom of the roll and the leading edge is straight.
3. Pull a small amount of paper past the cutter mechanism.
4. Close the top cover firmly until it latches. The printer will automatically feed the paper to the correct position.

5.4 Interface Connections (USB, Ethernet, Wi-Fi)

The RPT006 (USB+ETH+WiFi) model offers multiple connectivity options:

• Sambungan USB: Connect the provided USB cable from the printer's USB port to an available USB port on your computer or POS terminal.
• Sambungan Ethernet (LAN): Connect a standard Ethernet cable from the printer's Ethernet port to your network router or switch.
• Sambungan Wi-Fi: For Wi-Fi setup, refer to the detailed instructions on the included USB drive or the manufacturer's website for specific configuration steps, as this typically involves utility software.

6. Arahan Operasi

6.1 Hidupkan/Mati Kuasa

• Hidupkan kuasa: Flip the power switch (usually located at the rear or side) to the ON position. The POWER indicator light will illuminate.
• Matikan: Flip the power switch to the OFF position. The POWER indicator light will turn off.

6.2 Pemasangan Pemandu

Drivers are required for the printer to communicate with your operating system (Windows, Linux, OPOS). The necessary drivers are provided on the included USB drive.

1. Insert the USB drive into your computer.
2. Locate and run the appropriate driver installer for your operating system.
3. Ikut arahan pada skrin untuk melengkapkan pemasangan pemacu.
4. For Wi-Fi configuration, refer to the specific utility software provided on the USB drive.

6.3 Mencetak Halaman Ujian

After driver installation, you can print a test page to confirm proper setup:

• For Windows: Go to "Devices and Printers," right-click on the 3nStar RPT006 printer, select "Printer properties," and then click "Print Test Page."
• Alternatively, you can often print a self-test page by holding down the FEED button while turning on the printer (consult the USB drive manual for exact procedure).

7. Penyelenggaraan

7.1 Membersihkan Pencetak

• Matikan pencetak dan cabut palam kord kuasa sebelum membersihkannya.
• Gunakan kain lembut dan kering untuk mengelap bahagian luar pencetak.
• Untuk membersihkan kepala cetakan terma, gunakan kapas dengan lembutampened with isopropyl alcohol. Gently wipe the print head surface. Allow it to dry completely before powering on.
• Regularly remove paper dust and debris from the paper path.

7.2 Penggantian Kertas

When the PAPER indicator flashes or no paper is detected, replace the thermal paper roll as described in Section 5.3.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the documentation provided on the included USB drive or visit the official 3nStar webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.