Manual Pengguna Kamera Rangkaian Luar Vivotek FE9391-EHV-v2 12 Megapiksel

1. Pengenalan

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Vivotek FE9391-EHV-v2 12 Megapixel Outdoor Network Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

The Vivotek FE9391-EHV-v2 is an outdoor fisheye network camera designed for surveillance applications, featuring a 12-megapixel sensor, WDR Pro for high-contrast environments, H.265 compression, and Smart IR II technology for night vision up to 20 meters. Its housing is IP66-rated for weather protection and IK10-rated for vandal resistance.

2. Maklumat Keselamatan

Patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kerosakan pada produk atau kecederaan kepada kakitangan:

• Ensure all power connections are secure and meet specified voltage keperluan (12 Volt).
• Jangan cuba membuka atau mengubah suai kamera. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Install the camera in a location that can support its weight and is protected from extreme environmental conditions beyond its IP66 rating.
• Avoid pointing the lens directly at strong light sources for extended periods.
• Use only Vivotek-approved accessories.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Vivotek FE9391-EHV-v2 Network Camera (1 unit)
• Installation Guide (Printed or Digital)
• Skru dan Penambat Pemasangan
• Waterproof Connector (if applicable)

Note: Specific contents may vary. Refer to the packaging for exact details.

4. Persediaan dan Pemasangan

This section outlines the steps for physically installing and initially connecting your Vivotek FE9391-EHV-v2 camera.

4.1 Pertimbangan Pemasangan

The FE9391-EHV-v2 is designed for outdoor use and supports wall or desk mounting. Choose a mounting location that provides the desired field of view (180 degrees) and is within reach of network and power connections.

Rajah 1: Vivotek FE9391-EHV-v2 Fisheye Network Camera. This image shows the white dome-shaped camera with a black central lens area, featuring the Vivotek logo on the top left. The fisheye lens is visible in the center.

4.2 Langkah Pemasangan Fizikal

1. Sediakan Permukaan Pemasangan: Mark the drilling points using the provided mounting template (if applicable). Drill holes for the mounting screws and anchors.
2. Selamatkan Tapak Kamera: Attach the camera's mounting base securely to the prepared surface using the screws.
3. Connect Network and Power:
   • Rangkaian: Connect an Ethernet cable to the camera's RJ45 port. This camera supports Power over Ethernet (PoE), simplifying wiring.
   • Kuasa (Pilihan): If PoE is not used, connect a 12V DC power adapter (not included) to the camera's power input. Ensure the power source meets the camera's 22.5 watts requirement.
4. Pasangkan Badan Kamera: Secure the main camera body to the mounting base. Ensure it is properly aligned and locked into place according to the specific model's mechanism.
5. Laraskan Sudut Kanta: If adjustable, position the fisheye lens to cover the desired surveillance area.

4.3 Konfigurasi Rangkaian Awal

After physical installation, connect the camera to your network. The camera typically obtains an IP address via DHCP. Use Vivotek's IP Search utility or a network scanner to discover the camera's IP address. Access the camera's web antara muka melalui a web browser using its IP address to complete initial setup, including setting a strong password and configuring network settings.

5. Arahan Operasi

This section covers the basic operation of your Vivotek FE9391-EHV-v2 camera through its web antara muka.

5.1 Mengakses ke Web Antara muka

1. Buka a web penyemak imbas (cth, Chrome, Firefox).
2. Enter the camera's IP address in the address bar and press Enter.
3. Log in using your username and password. (Default credentials are often provided in the quick start guide; change them immediately after first login).

5.2 Langsung View and Dewarping

The camera's web interface provides a live view of the surveillance area. Due to the fisheye lens, the raw image will appear distorted. The camera features local dewarping capabilities. Navigate to the "Live View" or "Display" section to select various dewarping modes (e.g., 1O, 1P, 1R, 4R) to view the scene in a more conventional perspective.

5.3 Rakaman dan Penyimpanan

Configure recording settings through the web interface. Options typically include:

• Rakaman Berterusan: Records constantly.
• Rakaman Dicetuskan Peristiwa: Records when motion is detected or other events occur.
• Rakaman Berjadual: Records during specific times.

Recordings can be stored on a Network Video Recorder (NVR), a local SD card (if supported and installed), or network-attached storage (NAS).

5.4 Pengesanan Gerakan dan Makluman

The camera supports motion detection. Configure detection zones and sensitivity levels in the "Event" or "Alarm" settings. Set up alerts such as email notifications or FTP uploads when motion is detected.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan jangka hayat kamera anda.

• Membersihkan Lensa: Gently wipe the lens with a soft, clean, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces. Do not use abrasive cleaners.
• Kemas kini Firmware: Periodically check the Vivotek website for firmware updates. Updating firmware can improve performance, add new features, and address security vulnerabilities. Follow the provided instructions carefully during the update process.
• Pemeriksaan Fizikal: Regularly inspect the camera housing, mounting brackets, and cables for any signs of damage, corrosion, or loose connections.
• Kesambungan Rangkaian: Ensure stable network connectivity. Check cable integrity and network device status.

7. Penyelesaian masalah

Bahagian ini menyediakan penyelesaian kepada isu biasa yang mungkin anda hadapi.

If the problem persists, contact Vivotek technical support.

8. Spesifikasi

Key technical specifications for the Vivotek FE9391-EHV-v2 Network Camera:

• model: FE9391-EHV-v2
• Penderia Imej: CMOS 12 Megapiksel
• Resolusi: 2944 x 2944
• Kanta: 1.22 mm Fixed Fisheye Lens
• Bidang View: 180 Darjah
• Pemampatan Video: H.265, H.264, MJPEG
• Penglihatan Malam: Infrared (IR) up to 20m (65.62 ft) with Smart IR II
• Penilaian Alam Sekitar: IP66 (Tahan Habuk dan Air)
• Vandal Resistance: IK10
• Input Kuasa: 12 Volts DC or Power over Ethernet (PoE)
• Penggunaan Kuasa: 22.5 watt
• Ketersambungan: Wired Ethernet (PoE), Wi-Fi (for certain configurations, though primary is PoE)
• Dimensi: Kira-kira 19.69 x 19.69 x 11.02 inci
• Berat: 1.2 Kilogram (2.64 paun)
• Ciri Khas: WDR Pro, Smart Stream III, Smart VCA, Vision Object Analytics, Motion Sensor, Local Dewarp

9. Maklumat Waranti

Vivotek products typically come with a limited warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official Vivotek webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.

10. Sokongan Teknikal

For technical assistance, product inquiries, or service requests, please contact Vivotek technical support through their official channels:

• Webtapak: Visit the Vivotek official webtapak untuk sumber sokongan, Soalan Lazim dan maklumat hubungan.
• Portal Sokongan Dalam Talian: Access the Vivotek support portal for submitting tickets and finding documentation.
• Sokongan Telefon: Refer to the Vivotek webtapak untuk nombor sokongan telefon serantau.

When contacting support, please have your camera's model number (FE9391-EHV-v2) and serial number ready.