Manual Pengguna Pengesan Fire-Lite 4098-9714

Produk Selesaiview

The Fire-Lite 4098-9714 is an analog and addressable photoelectric smoke detector head. It is designed to provide 360-degree smoke entry for optimal response to smoke from any direction. This detector is compatible with Simplex 4010 and 4100U series control panels.

Rajah 1: Depan view of the Fire-Lite 4098-9714 photoelectric smoke detector. This image shows the circular white casing with ventilation slots around the perimeter, designed for 360-degree smoke entry.

Maklumat Keselamatan Penting

Always read and understand all instructions before installing or operating this device. Failure to follow these instructions may result in property damage, injury, or death. This device operates on 24 volts AC power. Ensure power is disconnected before installation or maintenance.

• Pemasangan mesti dilakukan oleh kakitangan yang berkelayakan mengikut semua kod elektrik tempatan dan nasional.
• Do not paint the detector. Paint can interfere with the proper operation of the device.
• Test the detector regularly as per manufacturer guidelines and local regulations.
• This detector is designed for indoor use only.

Persediaan dan Pemasangan

The 4098-9714 detector head is designed to be installed onto a compatible detector base (sold separately). Ensure the base is properly wired to the fire alarm control panel before attaching the detector head.

Langkah Pemasangan:

1. Pemutusan Kuasa: Before beginning installation, ensure that all power to the fire alarm control panel and associated circuits is disconnected.
2. Pemasangan asas: Mount the compatible detector base (e.g., 4098-9792, 4098-9793, 4098-9794) securely to the ceiling or wall according to its specific instructions. Ensure wiring connections to the base terminals are correct and secure.
3. Detector Head Attachment: Align the 4098-9714 detector head with the installed base. The detector head typically has alignment marks or notches that correspond to the base.
4. Putar ke Kunci: Gently push the detector head onto the base and twist clockwise until it clicks into place. This secures the detector and makes the electrical connections.
5. Pemulihan dan Pengujian Kuasa: Restore power to the fire alarm control panel. Perform a functional test of the detector as described in the "Operating" section to ensure proper communication and alarm activation.

Beroperasi

The Fire-Lite 4098-9714 is an intelligent addressable detector. Its operation is managed by the connected fire alarm control panel (e.g., Simplex 4010 or 4100U series). The detector continuously monitors for smoke and communicates its status to the control panel.

Petunjuk Status:

The detector typically includes an LED indicator that provides visual status feedback:

• Operasi Biasa: LED flashes periodically (e.g., green flash every few seconds) indicating normal communication with the control panel.
• Keadaan Penggera: LED illuminates steadily (e.g., red steady) when smoke is detected and an alarm is initiated.
• Keadaan Masalah: LED may flash in a specific pattern (refer to control panel manual) to indicate a fault or trouble condition.

Menguji Pengesan:

Regular testing is crucial to ensure proper operation. Consult your fire alarm control panel's manual for specific testing procedures. Common methods include:

• Ujian Fungsian: Use a can of approved aerosol smoke detector test spray. Apply the spray to the detector's sensing chamber until an alarm is initiated at the control panel.
• Magnet Test: Some bases or detectors may have a magnet test feature. Refer to the base's instructions.

Always notify relevant authorities and building occupants before conducting tests to avoid false alarms.

Penyelenggaraan

Proper maintenance ensures the longevity and reliability of your 4098-9714 detector.

Pembersihan:

• Kekerapan: Detectors should be cleaned at least once a year, or more frequently in dusty environments.
• Prosedur:
  1. Disconnect power to the detector circuit at the control panel.
  2. Gently twist the detector head counter-clockwise to remove it from its base.
  3. Use a soft brush or a vacuum cleaner with a soft brush attachment to remove dust and debris from the exterior and sensing chamber openings. Do not use liquids or cleaning solvents.
  4. Reattach the detector head to its base by aligning and twisting clockwise until it locks.
  5. Restore power and test the detector.

Penggantian:

Smoke detectors have a limited lifespan. The 4098-9714 detector should be replaced according to manufacturer recommendations or local fire codes, typically every 10 years. Refer to the date of manufacture on the detector label.

Menyelesaikan masalah

This section provides solutions to common issues. For complex problems, contact a qualified fire alarm technician.

Spesifikasi

• model: 4098-9714
• Jenama: Api-Lite
• Jenis Sensor: Fotolistrik
• Sumber Kuasa: AC (24 Volt)
• Bahan: plastik
• warna: putih
• Berat Barang: 3 Auns
• Dimensi Produk: 3 x 3 x 2 inci
• Penilaian Suhu Atas: 122 Darjah Fahrenheit
• Jenis Penggera: Audible (via control panel)
• Keserasian: Simplex 4010 and 4100U series control panels
• Pengeluar: FIRE-LITE ALARMS
• UPC: 704260143803

Waranti dan Sokongan

The Fire-Lite 4098-9714 detector typically comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact Fire-Lite Alarms directly. For technical support, installation assistance, or troubleshooting beyond this manual, please contact a certified fire alarm system technician or the manufacturer's customer service.

Pengeluar: FIRE-LITE ALARMS

Note: Warranty information provided in the product data was "1", which is not detailed. I will state that the user should refer to the documentation or manufacturer.