1. Pengenalan
This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of your Nilight Hitch Mount Flagpole Holder. Please read these instructions carefully before use and retain this manual for future reference.
The Nilight Hitch Mount Flagpole Holder is designed to securely hold flagpoles, antennas, or similar items with a diameter between 1 inch and 2.3 inches. It is compatible with standard 2-inch hitch receivers found on various vehicles including RVs, SUVs, pickup trucks, campers, trailers, and Jeeps.
Imej 1.1: Selesaiview of the Nilight Hitch Mount Flagpole Holder and its application on a vehicle.
2. Kandungan Pakej
Sahkan bahawa semua komponen yang disenaraikan di bawah terdapat dalam pakej anda:
- 1x Flagpole Holder
- 2x Mounting Screws (knob type)
- 1x Hitch Pin & Hitch Pin Clip
- 1x Square Wire Lock Pin
- 2x 2-inch Flange Pipe Sockets (optional use)
- 1x Manual Pengguna
Image 2.1: All components included in the package for the flagpole holder.
3. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | 91068A |
| bahan | Keluli Aloi |
| Jenis Selesai | Coated (Powder Coating) |
| Compatible Hitch Receiver Size | 2 inci |
| Compatible Flagpole Diameter | 1 inch to 2.3 inches |
| Dimensi Produk (L x W x H) | 18 x 3 x 19 inci |
| Berat Barang | 8.48 paun (3.86 kg) |
| Maximum Spare Tire/Tailgate Clearance | 13 inci |
Image 3.1: Detailed dimensions of the flagpole holder components.
4. Maklumat Keselamatan
- Ensure the hitch mount is securely installed in the vehicle's 2-inch receiver with the provided hitch pin and clip before attaching any flagpole or other items.
- Verify that the flagpole or item inserted into the holder is within the specified diameter range (1 to 2.3 inches) and is securely fastened with the knob screws.
- Regularly inspect the hitch mount and all fasteners for signs of wear, damage, or loosening, especially before and after each use.
- Do not exceed the recommended weight capacity for your vehicle's hitch receiver.
- Be aware of the increased height and length of your vehicle when a flagpole or other item is mounted, especially when driving under low clearances or in reverse.
- When driving, ensure the flagpole is stable and does not obstruct your view or create a hazard for other drivers.
5. Arahan Pemasangan
Follow these steps to install the Nilight Hitch Mount Flagpole Holder:
- Masukkan ke dalam Penerima Hitch: Slide the square tube of the flagpole holder into your vehicle's 2-inch hitch receiver. The holder offers 3 hole positions for adjustment. Select the position that provides optimal clearance for your spare tire or tailgate. The maximum space for a spare tire or tailgate is 13 inches wide. Nota: Measure your spare tire's thickness to confirm compatibility. Tailgates may only rest down halfway with the holder installed.
- Selamatkan Pemegang: Align the holes on the flagpole holder's square tube with the pinhole on your hitch receiver. Insert the provided hitch pin through the aligned holes and secure it with the hitch pin clip. Ensure the pin is fully engaged and the clip is locked.
- Prepare for Flagpole Insertion: The bottom of the flagpole holder is fully open to prevent water or dirt buildup and allow the pole to rest on the ground if desired. If you need to close the bottom for shorter poles or specific applications, use the provided square wire lock pin by inserting it through the designated holes at the bottom of the tube.
- Insert Flagpole: Place your flagpole or desired item into the vertical tube of the holder. The holder accommodates diameters from 1 inch to 2.3 inches. For poles equal to or less than 2 inches in diameter, you may optionally use the two 2-inch flange pipe sockets to ensure a snug fit and reduce movement.
- Secure Flagpole: Tighten the two knob-type mounting screws on the side of the vertical tube to firmly fix the flagpole in place. Ensure the flagpole is stable and does not wobble.
Image 5.1: The hitch mount offers three adjustable positions for optimal clearance.
Image 5.2: The open bottom design and the optional square wire lock pin for closing the bottom.
Image 5.3: The holder supports various pole diameters, with optional flange pipe sockets for smaller poles.
6. Operasi
Once installed, the Nilight Hitch Mount Flagpole Holder can be used for various purposes:
- Paparan Bendera: Securely fly your flag during parades, while driving, or when parked. Ensure the flag size is appropriate for safe travel.
- Pemasangan Antena: The holder can be used to mount various types of antennas for communication or other applications.
- Pemegang payung: On stationary vehicles, the holder can support a patio umbrella for shade.
Image 6.1: Various applications of the hitch mount flagpole holder, including flags, antennas, and umbrellas.
7. Penyelenggaraan
To ensure the longevity and proper function of your flagpole holder:
- Pembersihan: Clean the holder periodically with mild soap and water to remove dirt, dust, and road grime. Rinse thoroughly and dry.
- Pemeriksaan: Regularly check all components, including the main structure, hitch pin, clip, and knob screws, for any signs of corrosion, bending, cracks, or other damage.
- Pengikat: Ensure all screws and pins remain tight. Re-tighten as necessary.
- Storan: When not in use for extended periods, store the flagpole holder in a dry place to prevent rust and prolong its lifespan.
8. Penyelesaian masalah
- Flagpole is Loose: Ensure the knob-type mounting screws are fully tightened. If using a flagpole with a diameter less than 2 inches, consider using the provided flange pipe sockets for a more secure fit.
- Hitch Mount is Loose in Receiver: Verify that the hitch pin is fully inserted and secured with the clip. If excessive play exists, a hitch tightener (not included) may be used to reduce movement.
- Tailgate/Spare Tire Clearance Issues: Adjust the flagpole holder to one of the three available hole positions in the hitch receiver to optimize clearance. Measure your spare tire's thickness before installation to ensure compatibility.
- Difficulty Inserting Flagpole: Check the flagpole diameter to ensure it is within the 1 to 2.3-inch range. Clean any debris from inside the holder tube.
9. Waranti dan Sokongan
The Nilight Hitch Mount Flagpole Holder comes with a 2-year warranty. For warranty claims, technical assistance, or any questions regarding the product, please contact Nilight customer support through their official website or the retailer where the product was purchased. Please have your model number (91068A) and proof of purchase available when contacting support.
