WEN 10-Inch Single Bevel Sliding Compound Miter Saw (MM1011T) Instruction Manual

1. Maklumat Keselamatan Penting

Sentiasa patuhi langkah berjaga-jaga keselamatan asas apabila menggunakan alatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri. Baca semua arahan sebelum mengendalikan produk ini.

• Pakai peralatan pelindung diri yang sesuai, termasuk pelindung mata, perlindungan pendengaran dan topeng habuk.
• Pastikan bahan kerja berada dalam keadaan selamatamped sebelum dipotong.
• Keep hands and fingers clear of the blade path.
• Disconnect power before making adjustments or changing accessories.
• Kekalkan kawasan kerja yang bersih dan terang.

2. Kandungan Pakej

Verify all items are present upon unpacking:

• WEN 10-Inch Single Bevel Sliding Compound Miter Saw (MM1011T)
• 10-inch 40-tooth carbide-tipped blade (pre-installed or to be installed)
• Two table extensions
• Satu clamp perhimpunan
• Beg habuk
• Penyesuai port habuk
• Class II laser guide (integrated)

3. Pemasangan dan Persediaan Awal

The miter saw requires minimal assembly. Follow these steps:

1. Attach the Throat Plate: Secure the front part of the throat plate to the saw base using the provided hardware.
2. Pasang Pemegang: Attach the main handle to the saw head with the designated screws.
3. Insert Side Tables: Slide the two table extensions into their respective slots on either side of the saw base to provide additional workpiece support.
4. Check Squareness: Before first use, verify that the blade is square to the fence and the saw bed at 90 degrees. Adjust if necessary according to the detailed instructions in the full manual.

4. Arahan Operasi

Familiarize yourself with the saw's controls and functions before making cuts.

4.1 Pelarasan Sudut Miter

The saw can miter up to 45 degrees in either direction. To adjust:

1. Loosen the miter lock knob located at the front of the saw base.
2. Press the miter detent lever and rotate the turntable to the desired angle. The saw features 9 positive miter stops: two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees, and one at 0 degrees.
3. For angles between detents, release the lever and tighten the miter lock knob to secure the position.

4.2 Pelarasan Sudut Serong

The saw bevels up to 45 degrees to the left. To adjust the bevel angle:

1. Loosen the bevel lock handle at the rear of the saw.
2. Condongkan kepala gergaji ke sudut yang dikehendaki.
3. Tighten the bevel lock handle to secure the position.

4.3 Fungsi Gelongsor

The dual-rail slide system allows for cutting wider materials. Pull the saw head forward, make the cut, and push it back. This design also enables compact operation, allowing the saw to be placed flush against a wall.

4.4 Laser Guide

The integrated Class II laser guide illuminates the line of cut for enhanced accuracy. Activate the laser using the switch located on the saw head.

4.5 Hentian Kedalaman

Utilize the depth stop feature for making partial cuts, such as dadoes or grooves. Adjust the depth stop knob to limit the downward travel of the blade.

4.6 Bahan Kerja Clamping

Always secure your workpiece using the included clamp assembly to prevent movement during cutting, ensuring safety and accuracy.

4.7 Pengumpulan Habuk

Attach the included dust bag or a dust collection device to the dust port adapter to manage sawdust and maintain a cleaner work environment.

5. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the life of your miter saw.

• Pembersihan: Regularly clean sawdust and debris from the saw, especially around the blade guard, miter scale, and sliding rails. Use compressed air for hard-to-reach areas.
• Pemeriksaan Bilah: Inspect the blade for sharpness and damage before each use. Replace dull or damaged blades promptly.
• Pelinciran: Periodically apply a light coat of lubricant to the sliding rails to ensure smooth operation.

6. Penyelesaian masalah

Address common issues with your miter saw:

• Potongan Tidak Tepat: Verify the saw's calibration for miter and bevel angles. Ensure the blade is clean and sharp. Check for any play in the sliding mechanism.
• Habuk Berlebihan: Ensure the dust bag is properly attached and emptied regularly. Check for any blockages in the dust port or collection system.
• Motor Not Starting/Overheating: Check the power supply and ensure the circuit is not overloaded. Allow the motor to cool down if it overheats. Consult the full manual for specific electrical requirements.

7. Spesifikasi Teknikal

8. Waranti dan Sokongan Pelanggan

The WEN 10-Inch Single Bevel Sliding Compound Miter Saw (MM1011T) comes backed by a two-year warranty. WEN maintains a stocked inventory of replacement parts and offers a customer help line for support.

For warranty claims, replacement parts, or technical assistance, please refer to the contact information provided in your product packaging or visit the official WEN webtapak.