Risco Vupoint POE IP Camera User Manual

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Risco Vupoint POE IP Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Produk Selesaiview

The Risco Vupoint POE IP Camera is a high-resolution surveillance camera designed for robust security applications. It features Power over Ethernet (PoE) for simplified installation, a 4 Megapixel sensor for clear imaging, and advanced night vision capabilities.

Figure 1: Risco Vupoint POE IP Camera. This image shows a white cylindrical camera with a black lens housing and a circular mounting base. The 'RISCO' logo is visible on the side of the camera body.

Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• 1 x Risco Vupoint POE IP Camera (Model: RVCM52P2200A)
• Perkakasan Pemasangan (skru, sauh)
• Panduan Mula Pantas

2. Maklumat Keselamatan

Sila patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kerosakan pada produk atau kecederaan pada diri anda:

• Ensure the power source meets the camera's requirements (PoE).
• Do not expose the camera to extreme temperatures or humidity beyond its IP67 rating.
• Avoid direct exposure of the lens to strong light sources.
• Jangan cuba membuka atau mengubah suai kamera. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Install the camera securely to prevent it from falling.

3. Persediaan dan Pemasangan

Pemasangan Fizikal

The Risco Vupoint POE IP Camera is designed for wall or ceiling mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 1.06 kg / 2.34 lbs).

1. Choose a suitable location that provides the desired field of view and is within range of your network cable.
2. Use the provided mounting template (if applicable) to mark drill holes on the wall or ceiling.
3. Tebuk lubang dan masukkan penambat dinding jika perlu.
4. Lindungi tapak pelekap kamera ke permukaan menggunakan skru yang disediakan.
5. Laraskan sudut kamera untuk liputan optimum.

Sambungan Rangkaian (PoE)

This camera supports Power over Ethernet (PoE), simplifying wiring by delivering both power and data over a single Ethernet cable.

1. Sambungkan satu hujung kabel Ethernet ke port RJ45 kamera.
2. Connect the other end of the Ethernet cable to a PoE-enabled switch or PoE injector.
3. Ensure your network is configured to provide IP addresses via DHCP or assign a static IP address to the camera if required by your system.

Konfigurasi Awal

The camera is designed for Plug and Play installation with Risco systems. For integration with Risco Cloud™, Agility™ v3.59+, LightSYS™ v2.52+, or ProSYS™ Plus systems, follow the specific integration steps provided by Risco for your security panel.

• Risco NVR/License Requirement: Connection is mandatory via a Risco NVR, or a specific license may be required for full functionality and cloud connectivity.
• Keserasian ONVIF: The camera supports ONVIF protocol for integration with compatible third-party NVRs or video management systems. Refer to your NVR's manual for ONVIF device discovery and addition.
• Slot Kad SD: Insert a compatible microSD card (not included) into the camera's SD card slot for local storage of video recordings.

4. Mengendalikan Kamera

Langsung View dan Rakaman

Access the live video feed and manage recordings through your connected Risco security system's interface (e.g., Risco Cloud, NVR) or a compatible ONVIF client.

• Resolusi: The camera provides a 4 Megapixel effective video resolution. Recording resolution may be set to 1080p depending on system configuration.
• Penglihatan Malam: The camera features advanced night vision with a range of up to 50 meters, automatically activating in low-light conditions.
• Pengesanan Pergerakan: Configure motion detection zones and sensitivity settings via your connected system for event-triggered recording and alerts.

Ketersambungan Awan

For remote access and cloud-based features, ensure your camera is properly linked to your Risco Cloud account via a compatible Risco NVR or security panel.

5. Penyelenggaraan

Pembersihan

To maintain optimal image quality, periodically clean the camera lens and housing.

• Gunakan kain lembut dan kering untuk mengelap badan kamera.
• For the lens, use a lens cleaning cloth and a specialized lens cleaning solution. Do not use abrasive cleaners.

Kemas kini Perisian Tegar

Periodically check for firmware updates through your Risco system or Risco's official website. Firmware updates can improve performance, add new features, and enhance security.

6. Penyelesaian masalah

If you encounter issues with your Risco Vupoint POE IP Camera, refer to the following common problems and solutions:

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Risco webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

Risco Official Webtapak: www.riscogroup.com