pengenalan
The Keychron Q7 is a wired custom mechanical keyboard featuring a 70% layout, designed for versatility and performance. It supports QMK/VIA for extensive customization, includes hot-swappable Gateron G Pro Red switches, and is built with a double-gasket design for an enhanced typing experience. This manual provides instructions for setup, operation, maintenance, and troubleshooting.
Image: The Keychron Q7 Custom Mechanical Keyboard, showcasing its compact 70% layout and aluminum build.
Kandungan Pakej
Verify that all items listed below are included in your Keychron Q7 package:
Image: Diagram illustrating the Keychron Q7 keyboard and its accompanying accessories.
- papan kekunci: 1x Fully Assembled Keychron Q7 Keyboard (includes Aluminum Case, PCB, Steel Plate, Sound Absorbing Foam, Case Foam, 10 Gaskets (6 installed, 4 in box))
- Komponen: 5 sets x Stabilizers, 1 set x Double-Shot PBT Keycaps, 1 set x Gateron G Pro Switches
- Kabel: 1x Type-C to Type-C Cable, 1x Type-A to Type-C Adapter
- Alatan: 1x Switch Puller, 1x Keycap Puller, 1x Screwdriver, 1x Hex Key
Note: All tools are located at the bottom of the box.
Persediaan
1. Menyambung Papan Kekunci
- Locate the USB-C port on the back of the Keychron Q7 keyboard.
- Connect one end of the provided Type-C to Type-C cable to the keyboard.
- Connect the other end of the cable to your computer's USB-C port. If your computer only has USB-A ports, use the included Type-A to Type-C adapter.
- The keyboard should be recognized automatically by your operating system.
2. Switching Operating System Layout
The Keychron Q7 features a physical switch to toggle between Windows and macOS layouts. This ensures proper key mapping for your specific operating system.
Imej: Sisi view of the Keychron Q7, showing the physical switch to select between Windows and macOS modes.
- Locate the switch on the side of the keyboard, near the USB-C port.
- Slide the switch to the 'Win' position for Windows/Linux systems.
- Slide the switch to the 'Mac' position for macOS systems.
Arahan Operasi
QMK and VIA Customization
The Keychron Q7 fully supports QMK and VIA open-source firmware, allowing for extensive customization of key assignments, macros, and backlighting. This functionality is compatible with Mac, Windows, and Linux operating systems.
- To customize your keyboard, download the Keychron Launcher Web App or the VIA software from the official Keychron webtapak.
- The software provides a graphical interface to remap keys, create complex macros, and adjust RGB lighting effects.
- For detailed instructions on using QMK/VIA, refer to the documentation available on the Keychron support page or the QMK/VIA official webtapak.
Image: Keychron Launcher Web App interface for key remapping and macro programming.
Suis Boleh Tukar Panas
The Q7 features a hot-swappable design, allowing you to change switches without soldering. It supports both 3-pin and 5-pin MX-style mechanical switches.
Image: Keyboard PCB with keycaps removed, showing hot-swappable switch sockets and various switch types.
- Mengeluarkan Suis: Use the included switch puller tool. Gently grip the switch from the top and bottom, then pull straight up with even pressure until the switch detaches from the PCB.
- Memasang Suis: Align the pins of the new switch with the holes on the PCB. Ensure the switch is oriented correctly. Gently press the switch down until it clicks into place. Do not force the switch, as this can bend the pins.
Cap Kekunci PBT Dua Pukulan
The Q7 comes with durable double-shot PBT keycaps. These keycaps are resistant to shine and wear, ensuring legends remain clear over time.
Image: Close-up of the keyboard's double-shot PBT keycaps.
South-Facing RGB Backlighting
The keyboard features south-facing RGB LEDs, which provide even backlighting and are ideal for compatibility with most custom keycap sets.
Image: Illuminated south-facing RGB switches on the Keychron Q7 keyboard.
Penyelenggaraan
Membersihkan Papan Kekunci
- Putuskan sambungan papan kekunci daripada komputer anda sebelum membersihkan.
- Gunakan kain lembut dan tidak berbulu sedikit dampdibasahkan dengan air atau larutan pembersih lembut untuk mengelap penutup kekunci dan bekas. Elakkan kelembapan berlebihan.
- Untuk membersihkan antara penutup kekunci, gunakan udara termampat untuk menghilangkan habuk dan serpihan.
- For deeper cleaning, you may remove keycaps using the included keycap puller. Clean the keycaps separately with water and mild soap, then ensure they are completely dry before reattaching.
Switch and Keycap Care
- When removing or installing switches, apply gentle, even pressure to avoid bending switch pins or damaging the PCB sockets.
- Store spare switches and keycaps in a clean, dry place to prevent dust accumulation or damage.
Menyelesaikan masalah
If you encounter issues with your Keychron Q7 keyboard, refer to the following common troubleshooting steps:
- Papan Kekunci Tidak Membalas:
- Pastikan kabel USB-C disambungkan dengan selamat pada papan kekunci dan komputer anda.
- Cuba sambungkan papan kekunci ke port USB lain pada komputer anda.
- Verify that the operating system switch (Mac/Win) on the side of the keyboard is set correctly for your system.
- Uji papan kekunci pada komputer lain untuk menolak isu khusus komputer.
- Kunci Tidak Mendaftar:
- Carefully remove the keycap and switch for the non-functioning key using the provided tools.
- Inspect the switch pins for any bends or damage. Straighten bent pins gently with tweezers if possible.
- Reinsert the switch firmly into the PCB socket. If the issue persists, try swapping it with a known working switch.
- Isu Pencahayaan RGB:
- Check the Keychron Launcher Web App or VIA software to ensure lighting settings are configured as desired.
- Ensure no software conflicts are interfering with the lighting control.
- Kemas kini Firmware: Jika mengalami masalah berterusan, semak Keychron rasmi website for any available firmware updates for the Q7 model. Follow the provided instructions carefully for firmware updates.
For further assistance, please visit the official Keychron support page.
Spesifikasi
Imej: Meletup view of the Keychron Q7 keyboard's internal components.
| Ciri | Perincian |
|---|---|
| Model | Papan kekunci Q7 |
| Susun atur | 70% Susun Atur |
| Ketersambungan | Berwayar (USB-C) |
| Jenis Suis | Hot-swappable Gateron G Pro Red Switch |
| Operating Force (Gateron G Pro Red) | 45 ± 15 gf |
| Pre-travel (Gateron G Pro Red) | 2 ± 0.6 mm |
| Travel Distance (Gateron G Pro Red) | 4 ± 0.6 mm |
| Switch Behavior (Gateron G Pro Red) | Linear |
| Pre-lubed (Gateron G Pro Red) | ya |
| Sound Level (Gateron G Pro Red) | senyap |
| Kekunci Kekunci | PBT Tembakan Berganda |
| Pencahayaan latar | RGB Menghadap Selatan |
| Bahan Bingkai | aluminium |
| Gaya Pemasangan | Double Gasket Design |
| Sokongan Perisian Tegar | QMK/VIA Programmable |
| OS yang serasi | Mac, Windows, Linux |
| Dimensi Produk | 13.44 x 4.76 x 1.33 inci |
| Berat Barang | 5.17 paun |
Image: Detailed specifications for the Gateron G Pro Red switches.
Waranti dan Sokongan
Keychron products are designed for quality and durability. For information regarding warranty coverage, technical support, or to access additional resources such as firmware updates and software downloads, please visit the official Keychron website or their dedicated support pages.
You can find more information and contact support through the Keychron Brand Store on Amazon.
