1. Pengenalan
The Easythreed K1 Mini 3D Printer is an entry-level 3D printer designed for beginners, including children and teens. It offers a compact design, ease of use, and reliable performance for creating three-dimensional models. This manual provides essential information for setting up, operating, and maintaining your 3D printer.
Figure 1.1: The Easythreed K1 Mini 3D Printer, showcasing its compact design and a printed vase on the build plate.
2. Apa yang ada di dalam Kotak
Upon unboxing your Easythreed K1 Mini 3D Printer, please ensure all the following components are present:
- Easythreed K1 Mini 3D Printer Unit
- Penyesuai Kuasa
- Manual Pengguna (dokumen ini)
- Test PLA Filament (small quantity)
- TF Card (includes assembly video, sample files, and software)
3. Persediaan dan Pemasangan
The Easythreed K1 Mini 3D Printer is designed for quick and easy assembly, typically taking around 5 minutes. It consists of three main parts that need to be connected.
3.1 Perhimpunan Permulaan
- Keluarkan semua bahan pembungkusan dengan berhati-hati.
- Connect the main components as indicated in the assembly video provided on the TF card.
- Pastikan semua sambungan selamat sebelum meneruskan.
3.2 Pemuatan Filamen
The printer uses 1.75mm PLA or TPU filament. To load filament:
- Place the filament spool onto the designated holder.
- Gently feed the filament into the extruder's input hole until it catches.
- Use the 'Feed' button on the printer's control panel to automatically draw the filament into the nozzle. Wait until molten filament extrudes from the nozzle, indicating it's ready.
Figure 3.1: Key features including Dual Z Axis Design, Upgraded Extruder, Removable Magnetic Plate, and Easy Operating buttons.
4. Arahan Operasi
Operating the Easythreed K1 is straightforward with its intuitive controls.
4.1 Meratakan Katil (Langkah Penting)
Proper bed leveling is the most critical step for successful prints.
- Press the 'Home' button on the control panel. The print head will automatically move to its home (zero) position.
- Once the nozzle touches the magnetic plate, immediately disconnect the power. This prevents the nozzle from pressing too hard.
- Adjust the distance between the nozzle and the magnetic plate at four points (A, B, C, D) on the build platform. The correct distance should be approximately the thickness of a single piece of paper.
- If the nozzle is too close, it can damage the magnetic plate. If it's too far, the print will not adhere.
Figure 4.1: Visual guide for the bed leveling process, showing correct and incorrect nozzle distances.
4.2 Printing Your First Model
- Ensure the TF card with your desired model file is inserted into the printer's TF card slot. The printer will print the latest model file if multiple are present.
- Press the 'Start Printing' button. The printer will begin heating the nozzle and then commence printing.
- Monitor the initial layers to ensure proper adhesion to the build plate.
- Once printing is complete, wait for the print to cool down before carefully removing it from the removable magnetic plate. The flexible plate makes removal easy.
Gambar 4.2: Cthamples of various models that can be printed with the Easythreed K1 Mini 3D Printer.
4.3 Software and Slicing
The printer comes with its own design and slicing software on the supplied TF card. For more advanced users, Ultimaker Cura is recommended, and a profile file for import is provided.
Gambar 4.3: Lebihview of modeling software for advanced users, slicing software for intermediate users, and massive printable models for beginners.
5. Penyelenggaraan
Penyelenggaraan berkala memastikan ketahanan dan prestasi optimum pencetak 3D anda.
- Bersihkan muncung: Periodically clean any filament residue from the nozzle using a soft brush or cloth.
- Bersihkan Plat Binaan: After each print, ensure the magnetic build plate is clean and free of debris.
- Ketatkan Skru: Due to vibrations during printing, screws may loosen over time. Periodically check and tighten all screws, especially on the frame and moving parts.
- Simpan Filamen dengan Betul: Store filament in a dry, cool place to prevent moisture absorption, which can affect print quality.
6. Penyelesaian masalah
Berikut ialah beberapa isu biasa dan penyelesaiannya:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cetakan tidak melekat pada katil | Improper bed leveling, dirty build plate, incorrect print settings (e.g., first layer height) | Re-level the bed carefully (refer to Section 4.1), clean the build plate, adjust first layer settings in slicing software. |
| No filament extrusion | Nozel tersumbat, filamen kusut, suhu tidak betul | Clear nozzle clog, untangle filament, ensure correct printing temperature for PLA (typically 180-210°C). |
| Poor print quality (layers separating, rough surface) | Incorrect temperature, print speed too high, filament quality, loose components | Adjust temperature, reduce print speed, try new filament, check and tighten screws. |
| Printer making unusual noises | Loose screws, worn bearings, fan issues | Check and tighten all screws, inspect moving parts for obstruction or wear. |
7. Spesifikasi
Detailed technical specifications for the Easythreed K1 Mini 3D Printer:
- Dimensi Produk: 25D x 26.5W x 28H sentimeter
- Berat Barang: 1.4 Kilogram
- Building Size (Print Volume): 100 x 100 x 100 mm (4" x 4" x 4")
- Keserasian Filamen: PLA 1.75mm, TPU
- Ketepatan Cetakan: 0.1mm
- Diameter muncung: 0.4mm
- Extruder Heating Time: Mencapai 180°C dalam 3 minit
- Plat Binaan: Removable Magnetic Plate
- Penggunaan Kuasa (Mod dalam): 30 watt
- warna: Merah, Hitam
Figure 7.1: Dimensions of the Easythreed K1 Mini 3D Printer.
8. Waranti dan Sokongan
Easythreed is committed to providing excellent pre-sales and after-sales service. If you encounter any quality problems with the product, including damage to parts during use, or damage due to transportation, we will replace the affected parts or the entire product free of charge.
Should you experience difficulties with leveling or achieving successful prints, please do not hesitate to contact our support team. We are dedicated to resolving your issues as quickly as possible.
For support, please refer to the contact information provided on the Easythreed official webtapak atau dokumentasi yang disertakan dengan produk anda.
