LIGHTAILING 10293

LIGHTAILING LED Light Kit for LEGO 10293 Santa's Visit Model - Remote-Control Version Instruction Manual

Model: 10293

1. Pengenalan

This manual provides detailed instructions for the installation and operation of the LIGHTAILING LED Light Kit, remote-control version, specifically designed for the LEGO 10293 Santa's Visit building blocks model. This kit enhances the visual appeal of your LEGO model by adding integrated lighting. Please note that the LEGO model itself is not included with this light kit.

LIGHTAILING LED Light Kit installed on LEGO 10293 Santa's Visit model, showing the house illuminated with various lights.
The LIGHTAILING LED Light Kit illuminates the LEGO 10293 Santa's Visit model, showcasing exterior and interior lighting effects.

2. Maklumat Keselamatan

3. Kandungan Pakej

Sahkan bahawa semua komponen yang disenaraikan di bawah terdapat dalam pakej anda:

Image showing the contents of the LIGHTAILING LED Light Kit package, including LED light strips, wires, a remote control, and a battery box.
The LIGHTAILING LED Light Kit includes multiple light strips, connection cables, a remote control, and a battery box.
Diagram showing the package list for the LIGHTAILING LED Light Kit, illustrating the box, light components, remote, and instruction guide.
A visual representation of the items included in the LIGHTAILING LED Light Kit package.

4. Persediaan

The installation of the light kit is integrated with the LEGO model. It is recommended to follow the detailed instruction guide provided in the package for specific placement of each LED component. The general steps are as follows:

  1. Prepare the LEGO Model: Ensure your LEGO 10293 Santa's Visit model is assembled or partially disassembled as required by the instruction guide to access specific areas for light placement.
  2. Install LED Components: Carefully place the LED lights and wires according to the step-by-step instructions. The wires are designed to be thin and can be routed between LEGO bricks.
  3. Connect to USB Hubs: Connect the individual LED light kits to the provided USB hubs.
  4. Sambungan Kuasa: Insert three AA batteries into the battery box or connect the USB power cable to a compatible USB power source (less than 5V).
  5. Lampu Ujian: Before fully reassembling the LEGO model, test all lights to ensure they are functioning correctly.
Image showing the LIGHTAILING LED Light Kit installed within the LEGO 10293 Santa's Visit model, highlighting various illuminated sections.
The light kit components are designed to integrate seamlessly into the LEGO model's structure.
Atas kepala view of the LIGHTAILING LED Light Kit components laid out on a wooden table next to the product box and instruction manual.
Layout of the light kit components, including the instruction manual, for easy reference during setup.

5. Arahan Operasi

The LIGHTAILING LED Light Kit for LEGO 10293 Santa's Visit features a remote control for convenient operation.

5.1 Menghidupkan/Mematikan

Once the light kit is connected to a power source, the lights can be turned on or off using the remote control.

5.2 Adjusting Light Colors and Modes

The remote control allows you to switch between different light colors and modes, enhancing the display of your LEGO model. Refer to the remote control diagram in the instruction guide for specific button functions.

Image showing the LEGO 10293 Santa's Visit model illuminated with various light colors, controlled by a remote control.
The remote control allows for switching between different light colors and effects on the illuminated LEGO model.
Side-by-side comparison of the LEGO 10293 Santa's Visit model unlit and then fully illuminated with the LIGHTAILING LED Light Kit.
Comparison showing the LEGO model before and after the LIGHTAILING LED Light Kit is activated, demonstrating the illumination effect.
Official product video demonstrating the LIGHTAILING LED Light Kit for LEGO 10293 Santa's Visit, showcasing various lighting effects and remote control functionality.

6. Penyelenggaraan

7. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Lampu tidak menyala.No power, loose connection, or dead batteries.Check battery installation/charge, ensure USB power is connected, and verify all wire connections are secure.
Sesetengah lampu tidak berfungsi.Damaged wire or LED, or loose connection to the USB hub.Inspect individual wires and LEDs for damage. Re-seat connections to the USB hub.
Alat kawalan jauh tidak bertindak balas.Remote battery is dead or remote is too far from the receiver.Replace the remote control battery. Ensure the remote is within effective range of the light kit's receiver.
Lampu malap.Kuasa bateri rendah.Replace batteries or ensure USB power source is adequate.

8. Spesifikasi

CiriPerincian
Dimensi Produk6.5 x 4.72 x 1.57 inci
Berat Barang7.6 auns
Nombor Model10293
Sumber Kuasa3 AA batteries (not included) or USB power (less than 5V)
Kaedah KawalanAlat Kawalan Jauh
Umur Disyorkan6 tahun dan ke atas

9. Waranti dan Sokongan

LIGHTAILING is committed to providing quality products and services. If you encounter any problems with your LED Light Kit, please do not hesitate to contact customer support.

Dokumen Berkaitan - 10293

Praview LIGHTAILING LED Lighting Kit for LEGO Hogsmeade Village Visit 76388 - Installation Guide
Detailed installation instructions for the LIGHTAILING LED lighting kit (LGK454) designed for the LEGO Harry Potter Hogsmeade Village Visit set (76388). Enhance your building block display with custom illumination.
Praview Lightailing LGK469 Lawatan Santa 10293 Arahan Membina Mainan
Arahan langkah demi langkah untuk memasang set mainan bangunan Lightailing LGK469 Santa's Visit 10293. Panduan ini menyediakan langkah terperinci untuk pembinaan yang berjaya.
Praview Lightailing LED Lighting Kit for LEGO Corner Garage 10264 Instructions
Step-by-step instructions for installing the Lightailing LED lighting kit (model LGK34_2) for the LEGO Creator Expert Corner Garage 10264 set, including remote control operation.
Praview Lightailing Empire State Building Lighting Kit Installation Guide (LGK315_2)
Step-by-step instructions for installing the Lightailing LED lighting kit (Model LGK315_2) for the LEGO Empire State Building set. Includes details on the LGA002 remote control and receiver, and visual guidance for assembly.
Praview Panduan Pemasangan Kit Pencahayaan LED Lightailing LOVE 31214
Arahan dan panduan langkah demi langkah untuk memasang kit pencahayaan LED Lightailing untuk set blok binaan LOVE 31214. Termasuk operasi alat kawalan jauh dan butiran komponen.
Praview Lightailing Orchid 10311 LED Lighting Kit Installation Guide
Detailed instructions and guide for installing the Lightailing LED lighting kit for the Orchid 10311 building block set. Enhance your model with illumination.