Manual Pengguna Tolok Ketebalan Cat GYS 059856

1. Pengenalan

This manual provides detailed instructions for the safe and effective use of the GYS 059856 Paint Thickness Gauge. This portable device is designed for quick and easy measurement of non-magnetic coatings (such as paint or film) on metallic surfaces. It is an essential tool for various applications including the processing industry, automotive repair, metal treatment, chemical industry, and goods inspection.

Sila baca manual ini dengan teliti sebelum mengendalikan peranti dan simpan untuk rujukan masa hadapan.

2. Maklumat Keselamatan

• Always ensure the device is clean and dry before use.
• Jangan dedahkan peranti kepada suhu yang melampau, kelembapan atau cahaya matahari langsung.
• Elakkan daripada menjatuhkan atau meletakkan peranti kepada kesan yang kuat.
• Jangan cuba membuka atau membaiki peranti ini sendiri. Rujuk kakitangan yang berkelayakan untuk servis.
• Jauhkan peranti daripada capaian kanak-kanak.
• Buang bateri secara bertanggungjawab mengikut peraturan tempatan.

3. Produk Lebihview

The GYS 059856 Paint Thickness Gauge features a compact design with an LCD display and intuitive controls.

Rajah 1: Depan view of the GYS 059856 Paint Thickness Gauge. The device is yellow with a black LCD screen at the top. Below the screen are three black buttons: 'MODE' on the left, 'UNIT' on the right, and 'ZERO' with a power symbol in the center bottom.

3.1 Komponen Utama

• Paparan LCD: Shows measurement readings, units, and mode indicators.
• Butang MOD: Used to switch between measurement modes (Single, Continuous, Differential).
• Butang UNIT: Used to switch between metric (µm) and imperial (mils) units.
• Butang SIFAR: Used for zero calibration and powering the device on/off.
• Measurement Probe: Located at the bottom of the device, used to contact the surface for measurement.

4. Persediaan

4.1 Pemasangan Bateri

Locate the battery compartment on the back of the device. Insert the required batteries, ensuring correct polarity. Close the battery compartment securely.

4.2 Menghidupkan/Mematikan

Tekan dan tahan butang SIFAR butang untuk menghidupkan peranti. Untuk mematikan kuasa, tekan dan tahan butang SIFAR button again. The device also features an automatic shut-off function to conserve battery life.

5. Arahan Operasi

The GYS 059856 offers three measurement modes and supports both metric and imperial units.

5.1 Selecting Measurement Units

Tekan ke UNIT button to toggle between metric (µm) and imperial (mils) units.

5.2 Mod Pengukuran

Tekan ke MODE button to cycle through the following measurement modes:

• Mod Pengukuran Tunggal: Takes a single reading each time the probe is placed on the surface.
• Mod Pengukuran Berterusan: Continuously takes readings as the probe is moved across the surface.
• Differential Measurement Mode: Displays the difference between the current reading and a previously set reference value.

5.3 Mengambil Pengukuran

1. Ensure the surface to be measured is clean and free of debris.
2. Select the desired measurement unit and mode.
3. Place the measurement probe firmly and perpendicularly onto the coated metallic surface.
4. Baca nilai ketebalan yang dipaparkan pada skrin LCD.
5. Lift the device from the surface to prepare for the next measurement (in Single mode).

6. Penentukuran

Accurate measurements depend on proper calibration. The device supports three calibration functions:

6.1 Penentukuran Sifar

This calibration is performed on an uncoated, bare metallic surface to establish a zero reference point. Place the probe on a clean, uncoated metal surface and follow the on-screen instructions or refer to the device's specific calibration sequence (usually involving the SIFAR butang).

6.2 Penentukuran Dua Titik

This method uses two known thickness standards (e.g., a thin film and a thicker film) to calibrate the device across a range. This provides more accurate readings for varying thicknesses.

6.3 Easy Calibration

Refer to the device's specific instructions for "Easy Calibration," which may involve a simplified process for quick adjustments.

Note: Always calibrate the device before critical measurements or if you suspect inaccurate readings.

7. Penyelenggaraan

• Pembersihan: Lap peranti dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
• Storan: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries.
• Penjagaan Probe: Keep the measurement probe clean and free from scratches or damage.

8. Penyelesaian masalah

9. Spesifikasi

• model: GYS 059856
• Pengeluar: GYS
• Dimensi Produk (L x W x H): 10.5 x 6.1 x 2.8 cm
• Berat: 137 gram
• Prinsip Pengukuran: Non-magnetic coating on metallic surfaces
• Unit Pengukuran: Metric (µm), Imperial (mils)
• Mod Pengukuran: Single, Continuous, Differential
• Calibration Functions: Zero calibration, 2-point calibration, Easy calibration
• Matikan automatik: ya
• ASIN: B09GS7G1N4
• Rujukan Pengilang: 059856
• Ketersediaan Alat Ganti: Maklumat tidak tersedia

10. Waranti dan Sokongan

For warranty information and technical support, please refer to the official GYS website or contact your local distributor. Information regarding spare parts availability is not provided in the product specifications.

GYS Official Webtapak: www.gys.fr