REBEL RB-0003 3-in-1 Detector User Manual

Model: RB-0003

1. Pengenalan

Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.

The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.

2. Maklumat Keselamatan

Always exercise caution when working near detected objects.
Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
Pastikan peranti kering dan bersih. Jangan dedahkan kepada kelembapan atau suhu yang melampau.
Jangan cuba membuka atau mengubah suai peranti ini. Pembaikan hanya boleh dilakukan oleh kakitangan yang berkelayakan.
Tanggalkan bateri jika peranti tidak akan digunakan untuk tempoh yang lama.

3. Produk Lebihview

Familiarize yourself with the components of your REBEL RB-0003 detector:

REBEL RB-0003 3-in-1 Detector in its retail packaging, showing the front of the device with its display and 'SELECT' button.

Rajah 1: Depan view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.

Back of the REBEL RB-0003 3-in-1 Detector, showing the battery compartment cover and product label with model number MIE-RB-0003.

Rajah 2: Belakang view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.

Skrin Paparan: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
Butang PILIH: Used to switch between detection modes (Metal, Wood, AC Cable).
Kawasan Sensor: Located on the back of the device, this area must be flush against the surface for accurate readings.
Petak Bateri: Terletak di bahagian belakang, untuk pemasangan bateri.

4. Persediaan

4.1. Pemasangan Bateri

Open the battery compartment cover on the back of the device (refer to Figure 2).
Masukkan bateri yang diperlukan, pastikan kekutuban (+/-) betul. Peranti memerlukan bateri untuk operasi.
Tutup penutup petak bateri dengan selamat.

The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.

5. Arahan Operasi

5.1. Operasi Am

Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
Tekan ke PILIH button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.

5.2. Metal Detection

In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.

Select the Metal detection mode.
Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
A distinct audio alert or visual indicator will confirm the presence of metal.

5.3. Wood Detection

The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.

Switch to Wood detection mode.
Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
Mark the detected areas for reference.

5.4. AC Cable Detection

The RB-0003 is capable of detecting live AC 90-250V cables.

Select the AC Cable detection mode.
Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltage dikesan.
Awas: Always assume wires are live until confirmed otherwise by a qualified electrician.

6. Penyelenggaraan

Pembersihan: Lap peranti dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
Storan: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
Penggantian Bateri: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.

7. Penyelesaian masalah

Masalah	Kemungkinan Punca	Penyelesaian
Peranti tidak dihidupkan.	Bateri mati atau tidak dipasang dengan betul.	Periksa kekutuban bateri atau gantikan bateri.
Bacaan yang tidak tepat.	Low battery, improper contact with surface, or environmental interference.	Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields.
No detection in AC mode.	Wires are not live, or too deep.	Ensure power is on to the circuit. Scan slowly and thoroughly.

8. Spesifikasi

Ciri	Perincian
Nombor Model	RB-0003 (MIE-RB-0003)
Jenama	MEMBERONTAK
Kedalaman Pengesanan Logam	Sehingga 30 mm
Kedalaman Pengesanan Kayu	Up to 18 mm (for 30x30 mm profiles)
AC Cable Detection	90-250V
Saiz Paparan	51 x 25 mm
Penunjuk Bateri Rendah	ya
Sumber Kuasa	Dikuasakan Bateri
Dimensi Produk	15.5 x 5.4 x 2.7 cm
Berat Barang	157 Gram
Penilaian Perlindungan Antarabangsa	IP66

9. Waranti dan Sokongan

REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL webtapak.

For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL webtapak.

	Rebel Digital Multimeter MIE-RB-33B, C, D User Manual User manual for the Rebel Digital Multimeter models MIE-RB-33B, MIE-RB-33C, and MIE-RB-33D. Includes safety instructions, product description, operation guide, specifications, and maintenance information.
	Manual Pengguna Bekalan Kuasa Tidak Terganggu UPS Rebel RB-4020-5 Manual pengguna untuk model Rebel Uninterruptible Power Supply (UPS) RB-4020, RB-4021, RB-4022, RB-4023, RB-4024, RB-4025. Termasuk amaran keselamatan, pengenalan, spesifikasi, penyelesaian masalah dan maklumat pelupusan yang betul.
	Manual de Use Rebel RB-4026, RB-4027, RB-4028 - Invertor de Putere Anda telah melengkapkan penggunaan kawasan, memasang dan mengendalikan invertorului putere Rebel dengan sinusoida dan berfungsi sebagai penjagaan. Sertakan arahan tandatangan, pemilihan bateri dan teknik spesifikasi.
	Rebel MIE-RB-55 Digital Multimeter User Manual Comprehensive user manual for the Rebel MIE-RB-55 Digital Multimeter, covering safety instructions, product description, operation, maintenance, and technical specifications.
	Manual Pengguna Pemutar Skru Tanpa Kord Rebel RB-1003 Get detailed instructions and safety information for the Rebel RB-1003 Cordless Screwdriver. This user manual covers operation, maintenance, and troubleshooting for your Rebel tools.
	Instrukcja Obsługi Nożyc Akumulatorowych do Żywopłotu Rebel RB-5001.1 Odkryj instrukcję obsługi dla nożyc akumulatorowych do żywopłotu Rebel RB-5001.1. Dowiedz się o bezpiecznym użytkowaniu, konserwacji i danych technicznych tego narzędzia ogrodowego.

REBEL RB-0003