1. Pengenalan
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Okin JLDQ.10.435.250I recliner bed actuator motor. Please read these instructions thoroughly before proceeding with installation or use to ensure proper function and longevity of the product.
2. Produk Lebihview
The Okin JLDQ.10.435.250I is a refined linear actuator motor designed for recliner beds and power lift chairs. It serves as a direct replacement for specific Okin JLDQ series motors. The actuator motor set includes one motor unit and two connectors: a 5-pin round plug for the switch hand control and a 2-pin square plug with a clip for the power supply.
Image 2.1: The Okin JLDQ.10.435.250I recliner bed actuator motor.
Image 2.2: Close-up of the 2-pin power supply plug and 5-pin recliner switch plug.
3. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | JLDQ.10.435.250I |
| Penampilan | Hitam (PA), Perak Putih (Aluminium) |
| Strok | 250 mm |
| Minimum Dimensions (Shrink) | 435 mm |
| Maximum Dimensions (Extended) | 685 mm |
| Load (Push Force) | 1000 N |
| Load (Pull Force) | 1000 N |
| Kekerapan Operasi | Hidup 1 minit / Mati 8 minit |
| Input Kuasa | 24V === 50W (as per label) |
| Nombor Siri Cthample | S21053376 00006 |
Image 3.1: Product label showing model number JLDQ.10.435.250I dan data teknikal.
4. Keserasian
This Okin JLDQ.10.435.250I motor is designed as a replacement for the original Okin JLDQ motor, model JLDQ.10.435.250I. It can also replace the following models, though minor differences may exist that do not affect general use:
- JLDQ.19B.435.250D02
- JLDQ.19B.435.250D03
- JLDQ.19B.435.250D04
- JLDQ.10.435.250
- JLDQ.3.435.250
- 1.28.000.110.30 siri
Penting: Always verify your existing motor's brand, model, minimum install dimension, stroke, and plug types to ensure compatibility with the replacement unit. Different actuators may not be compatible with all recliner frames.
5. Maklumat Keselamatan
Sila patuhi langkah berjaga-jaga keselamatan berikut:
- Ensure the power supply is disconnected before attempting any installation, maintenance, or troubleshooting.
- This motor is designed for indoor use only.
- Do not operate the motor if any part is damaged or if the cables are frayed.
- Jauhkan tangan dan pakaian longgar daripada bahagian yang bergerak semasa operasi.
- Connection is only to class 2 DC circuit.
- Jika anda tidak pasti tentang sebarang langkah, rujuk juruteknik bertauliah.
6. Pemasangan
The installation process is generally straightforward. Follow these steps:
- Putuskan Kuasa: Unplug the recliner or bed from the main power outlet.
- Akses Motor: Carefully position the recliner to access the existing motor. This may involve tilting the chair or removing a fabric cover.
- Putuskan Motor Lama:
- Disconnect the 5-pin round plug from the hand control.
- Disconnect the 2-pin square plug from the power supply.
- Unbolt or unclip the old motor from the recliner frame.
- Keluarkan Motor Lama: Carefully remove the old actuator motor from the recliner mechanism.
- Pasang Motor Baru:
- Position the new Okin JLDQ.10.435.250I motor in the same location as the old one.
- Securely bolt or clip the new motor to the recliner frame.
- Sambungkan Motor Baharu:
- Connect the 5-pin round plug to the hand control.
- Connect the 2-pin square plug with the clip to the power supply. Ensure a secure connection.
- Kefungsian Ujian: Reconnect the recliner to the power outlet and test the motor's operation using the hand control. Ensure smooth extension and retraction.
Imej 6.1: Sisi view of the motor, showing mounting points and overall structure.
Imej 6.2: Bersudut view of the motor, illustrating its compact design for installation.
7. Operasi
Once installed and connected, operate the recliner motor using the hand control unit. Press the appropriate buttons on the hand control to extend or retract the recliner mechanism. The motor is designed for intermittent use with an operation frequency of "On 1 min / Off 8 min" to prevent overheating and ensure longevity.
Image 7.1: Visual representation of the motor's features and its application in a recliner chair.
8. Penyelenggaraan
The Okin JLDQ.10.435.250I motor requires minimal maintenance:
- Pembersihan: Keep the motor free from dust and debris. Wipe with a dry cloth. Do not use liquid cleaners directly on the motor.
- Pemeriksaan: Periodically inspect the motor and all connections for any signs of wear, damage, or loose fittings.
- Pelinciran: The motor is factory-lubricated and generally does not require additional lubrication.
9. Penyelesaian masalah
If your recliner motor is not functioning correctly, consider the following:
- Tiada Kuasa:
- Ensure the recliner is securely plugged into a working power outlet.
- Periksa unit bekalan kuasa untuk sebarang lampu penunjuk atau tanda-tanda kerosakan.
- Verify the 2-pin square plug connection to the power supply is firm.
- Motor Tidak Bertindak balas:
- Check the 5-pin round plug connection to the hand control.
- Inspect the hand control for damage or stuck buttons.
- Ensure the motor is not jammed by any obstructions in the recliner mechanism.
- Motor Terlalu Panas:
- Adhere to the "On 1 min / Off 8 min" operation frequency. Excessive continuous use can cause overheating.
- Pastikan pengudaraan yang mencukupi di sekeliling motor.
- Bunyi Luar Biasa:
- Disconnect power and inspect the motor and recliner mechanism for any loose parts or foreign objects.
Jika langkah penyelesaian masalah tidak menyelesaikan masalah, hubungi khidmat pelanggan.
10. Waranti dan Sokongan
For warranty information, technical support, or to inquire about replacement parts, please refer to the official Okin brand store or contact your retailer. Keep your purchase receipt for warranty claims.
Visit the official Okin Store: Kedai Okin di Amazon
