Okin Motor Model JLDQ-12 & JLDQ.12.134.329Q Instruction Manual

1. Pengenalan

This manual provides essential information for the installation, operation, and maintenance of the Okin Motor Model JLDQ-12 & JLDQ.12.134.329Q actuator. This motor is designed as a replacement part for power recliners, electric lift chairs, and adjustable beds. It is compatible with various Okin JLDQ.12.134.329 series models, including JLDQ.12.134.329D/E/G/J/K/L/P/Q/Z.

The actuator motor set includes one motor and three connectors, facilitating connection to a switch hand control, power supply, and a slaved motor if applicable.

2. Maklumat Keselamatan

Adherence to the following safety guidelines is crucial for proper function and to prevent damage or injury:

• Before installation, ensure the existing switch and power supply are functioning correctly.
• The motor has a maximum push/pull force capacity of 750N. Do not exceed this load, as overloading may result in damage or malfunction.
• Always follow the specific installation instructions provided with your furniture or by a qualified technician.
• Produk ini direka untuk kegunaan dalaman sahaja.
• Operation frequency: On 1 minute / Off 8 minutes. Avoid continuous operation beyond recommended cycles to prevent overheating.

3. Produk Lebihview

The Okin JLDQ.12.134.329Q motor actuator is a robust component designed for reliable performance in various reclining furniture. It features a durable construction and specific connection points for seamless integration.

Imej 3.1: Selesaiview of the Okin JLDQ-12 motor actuator, showing the main body, linear shaft, and attached wiring harness with connectors.

Komponen:

• Actuator Motor: The primary unit responsible for linear motion.
• 5-pin plug with clip: For connecting to the switch hand control.
• 2-pin square plug: Untuk menyambung kepada bekalan kuasa.
• 2-pin socket: For connecting to a slaved motor (if your system uses one).

Imej 3.2: Terperinci view of the three connectors: a 5-pin plug for the recliner switch, a 2-pin plug for the power supply, and a 2-pin socket for a slaved motor.

Maklumat Label Produk:

Image 3.3: Close-up of the motor's identification label, showing model number JLDQ-12, JLDQ.12.134.329Q, voltage (29V), wattage (48W), duty cycle (1 min ON/8 min OFF), and serial number.

4. Spesifikasi

5. Pemasangan

The Okin JLDQ.12.134.329Q motor is designed for straightforward replacement. However, it is critical to ensure compatibility with your existing furniture frame and electrical system.

Pemeriksaan Keserasian:

• Verify that your current motor's brand and model number match or are listed as compatible with JLDQ.12.134.329Q (e.g., JLDQ.12.134.329D/E/G/J/K/L/P/Q/Z).
• Confirm that the minimum installation dimension (134 mm), maximum installation dimension (463 mm), and stroke (329 mm) are suitable for your furniture's frame.
• Ensure the plug types (5-pin for switch, 2-pin square for power, 2-pin socket for slaved motor) match your existing wiring.

General Installation Steps (Consult furniture-specific instructions for details):

1. Putuskan Kuasa: Always unplug the furniture from the power outlet before beginning any installation or replacement.
2. Keluarkan Motor Lama: Carefully detach the old motor from the furniture frame. Note the orientation and connection points.
3. Putuskan Sambungan Pendawaian: Unplug all connectors from the old motor.
4. Pasang Motor Baru: Secure the new Okin JLDQ.12.134.329Q motor to the furniture frame using the appropriate hardware.
5. Sambungan Pendawaian: Connect the 5-pin plug to the hand control, the 2-pin square plug to the power supply, and the 2-pin socket to the slaved motor if present. Ensure all connections are secure.
6. Kefungsian Ujian: Plug the furniture back into the power outlet and test the motor's operation using the hand control.

Image 5.1: Visual representation of the motor's key features and dimensions, including stroke, minimum, and maximum installation sizes, alongside a recliner for context.

6. Operasi

Once installed, the Okin JLDQ.12.134.329Q motor operates in conjunction with your furniture's hand control unit. The motor provides linear actuation to adjust the position of your recliner, lift chair, or bed.

• Use the buttons on your hand control to extend or retract the actuator, thereby adjusting the furniture's position.
• Observe the recommended operation frequency of 1 minute ON / 8 minutes OFF to ensure motor longevity and prevent overheating.

7. Penyelenggaraan

Proper maintenance ensures the longevity and reliable performance of your Okin motor actuator.

• Pembersihan: Wipe the motor and its components clean with a dry or slightly damp kain. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
• Pemeriksaan: Periodically inspect the motor and all connections for any signs of wear, damage, or loose wiring.
• Pelinciran: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.

8. Penyelesaian masalah

If your recliner or lift chair is not functioning correctly, perform the following basic troubleshooting steps:

• Periksa Bekalan Kuasa: Ensure the furniture is securely plugged into a working electrical outlet. Test the outlet with another device.
• Inspect Hand Control: Verify that the hand control switch is functioning. Sometimes, the issue may lie with the control unit rather than the motor.
• Periksa Sambungan: Check all motor connections (5-pin, 2-pin square, 2-pin socket) to ensure they are firmly seated and not damaged.
• Keserasian Motor: Double-check that the installed motor is the correct model and compatible with your furniture's frame and electrical system.
• Perlindungan Lebihan: If the motor was recently used for an extended period, it might have entered a thermal protection mode. Allow it to cool down for at least 8 minutes before attempting operation again.

If the problem persists after performing these checks, it is recommended to consult a qualified technician or contact Okin customer support for further assistance.