Okin JLDQ.18.134.329Z02

Okin JLDQ.18.134.329Z02 Recliner Motor Actuator User Manual

Model: JLDQ.18.134.329Z02

Produk Selesaiview

The Okin JLDQ.18.134.329Z02 is a high-quality electric linear actuator designed for power recliners, lift chairs, and adjustable beds. This motor provides reliable push and pull force for smooth operation of your furniture.

Okin JLDQ.18.134.329Z02 Recliner Motor Actuator with cables

Image: The Okin JLDQ.18.134.329Z02 motor actuator with its attached cables and connectors.

This motor is an original Okin JLDQ series part, suitable for replacing models JLDQ.18.134.329Z02, JLDQ.18.134.329Z03, JLDQ.18.134.329Z05, JLDQ.18.134.329Z06, JLDQ.18.134.329Z08, JLDQ.18.134.329D, and JLDQ.18.134.329Z. While minor differences may exist between these models, they do not affect general usage.

Spesifikasi

Ciri	Perincian
Model	JLDQ.18.134.329Z02
Pengeluar	OKIN Refined Electric Technology Co., Ltd.
Kapasiti Beban (Tolak/Tarik)	750 N (Newton)
Panjang Strok	329 mm
Minimum Installation Dimension (Shrink)	134 mm
Maximum Dimension (Extended)	463 mm
Kekerapan Operasi	Hidup 1 minit / Mati 8 minit
Penampilan	Hitam (PA), Perak Putih (Aluminium)
Dimensi Produk	17.7 x 4 x 3 inci; 5 paun

Close-up of Okin JLDQ.18.134.329Z02 motor label with technical data

Imej: Terperinci view of the motor's label, showing model number JLDQ.18.134.329Z02 and other technical specifications.

Pemasangan dan Persediaan

This motor actuator set includes one motor and three distinct connectors for various functions. Ensure your furniture frame is compatible with the motor's minimum installation dimension, stroke, and plug types before proceeding.

Close-up of Okin motor connectors: 2-pin for power, 2-pin socket for slaved motor, 5-pin for recliner switch

Imej: Dari dekat view of the three connectors: a 2-pin plug for power supply, a 2-pin socket for a slaved motor, and a 5-pin round plug with a clip for the hand control switch.

Kenalpasti Penyambung:
- The connector with a 5-pin round plug and clip is for the switch hand control.
- The connector with a 2-pin square plug is for the power supply.
- The connector with a 2-pin socket is for a slaved motor (if applicable).
Remove Old Motor (if replacing): Carefully disconnect all wires and unbolt the old motor from the furniture frame. Note the orientation and connection points for reference.
Position New Motor: Align the new Okin motor with the mounting points on your furniture frame.
Secure Motor: Bolt the new motor securely into place. Ensure it is stable and does not wobble.
Sambungan Pendawaian:
- Connect the 5-pin round plug to your recliner's hand control switch.
- Sambungkan palam segi empat sama 2-pin ke unit bekalan kuasa.
- If your furniture uses a slaved motor, connect it to the 2-pin socket.
Kefungsian Ujian: Before fully reassembling your furniture, plug in the power supply and test the motor's operation using the hand control. Ensure smooth extension and retraction.

bersudut view of Okin JLDQ.18.134.329Z02 motor and cables

Image: An angled perspective of the Okin motor actuator, showcasing its compact design and integrated cable system.

Arahan Operasi

The Okin JLDQ.18.134.329Z02 motor operates in conjunction with your recliner's hand control switch and power supply. Follow the instructions provided with your furniture for specific operation of the recline mechanism.

Sambungan Kuasa: Ensure the motor's power supply cable is securely connected to a compatible power source.
Kawalan Tangan: Use the buttons on your recliner's hand control to extend or retract the motor, thereby adjusting the position of your furniture.
Kitaran Operasi: Adhere to the recommended operation frequency of "On 1 minute / Off 8 minutes" to prevent overheating and ensure the longevity of the motor. Avoid continuous operation for extended periods.

Graphic illustrating Okin motor features and ease of installation

Image: A graphic highlighting key product features, including its composition (1 motor, 3 connectors), appearance, stroke, and installation dimensions, emphasizing ease of installation and quiet operation.

Penyelenggaraan

The Okin JLDQ.18.134.329Z02 motor is designed for durability and requires minimal maintenance. Regular inspection can help ensure its continued smooth operation.

Jaga kebersihan: Periodically wipe down the motor and surrounding areas to prevent dust and debris buildup.
Periksa Kabel: Regularly check all cables and connectors for any signs of wear, fraying, or damage. Ensure connections are secure.
Pelinciran: The motor is pre-lubricated and generally does not require additional lubrication. If you notice unusual friction or noise, consult a qualified technician.
Elakkan beban berlebihan: Do not exceed the specified load capacity of 750 N (push/pull force) to prevent damage to the motor.

Menyelesaikan masalah

If you encounter issues with your Okin JLDQ.18.134.329Z02 motor, follow these steps to diagnose and resolve common problems:

Masalah	Kemungkinan Punca	Penyelesaian
Motor tidak beroperasi.	No power, loose connection, faulty hand control, or faulty power supply.	Check if the power cord is securely plugged into the wall outlet and the power supply unit. Verify all motor connections (hand control, power supply, slaved motor) are firm. Test the hand control switch and power supply unit if possible (e.g., with a multimeter or by swapping with known working parts).
Motor operates intermittently.	Loose connection, motor overheating, or intermittent fault in hand control/power supply.	Check all connections for looseness. Allow the motor to cool down if it has been operating continuously (adhere to "On 1 min / Off 8 min" cycle). Inspect hand control and power supply for damage.
Bunyi luar biasa semasa operasi.	Obstruction, loose mounting, or internal motor issue.	Inspect the area around the motor for any obstructions. Ensure the motor is securely bolted to the frame. Jika bunyi bising berterusan, hubungi sokongan pelanggan.

Nota: Always troubleshoot the switch and power supply first before assuming the motor is faulty. Ensure the motor and plug match your recliner system.

Waranti dan Sokongan

For warranty information or technical support regarding your Okin JLDQ.18.134.329Z02 motor, please refer to the documentation provided with your original purchase or contact Okin customer service directly.

Pengeluar: OKIN Refined Electric Technology Co., Ltd.

Untuk bantuan lanjut, anda boleh melawati Kedai Okin di Amazon.

Dokumen Berkaitan - JLDQ.18.134.329Z02

	Arahan Pemasangan untuk Kerusi Malas Angkat Kuasa YB2213 Panduan pemasangan langkah demi langkah untuk kerusi malas lif kuasa YB2213, termasuk kandungan pakej, langkah sambungan dan arahan pendawaian untuk kuasa dan alat kawalan jauh. Menampilkan fungsi haba dan urutan.
	Panduan Penyelesaian Masalah Sistem Okin: Pembaikan dan Penyelenggaraan Kerusi Lif Panduan penyelesaian masalah yang komprehensif untuk Sistem Okin yang digunakan dalam kerusi lif. Belajar untuk mendiagnosis dan menyelesaikan isu biasa dengan kawalan tangan, transformer, motor dan kacang gelendong. Termasuk petua pemasangan.
	Panduan Penggantian Alat Kawalan Jauh OKIN HSW306 5-Pin ke 7-Pin Arahan langkah demi langkah untuk menggantikan alat kawalan jauh kerusi malas 5-pin OKIN HSW306 dengan model 7-pin, termasuk pintasan pendawaian, langkah pemasangan dan aksesori yang disyorkan.
	Sistem Tempat Duduk OKIN: Komponen untuk Perabot Bergerak Katalog komprehensif sistem tempat duduk OKIN, termasuk mekanisme kerusi malas manual dan kuasa, mekatronik, kerusi lif, kerusi santai, penyandar kepala, sokongan lumbar, penggerak, telefon bimbit, suis dan aksesori untuk perabot gerakan.
	Arahan Ujian Pemalam Bluetooth untuk Penggerak OKIN EMONS Arahan ujian terperinci untuk sistem Pemalam Bluetooth OKIN EMONS, meliputi persediaan, pengujian fungsi aplikasi, penyimpanan dan penarikan balik kedudukan memori serta amaran keselamatan. Termasuk senarai komponen dan langkah operasi.
	Manual Pengguna Sistem Kawalan Jauh OKIN RF.31.24.01 Manual pengguna yang komprehensif untuk sistem kawalan jauh 22 kekunci OKIN RF.31.24.01, memperincikan fungsi butang, prosedur tetapan kedudukan dan komponen sistem untuk katil boleh laras.