Manual Arahan Sensor Gerakan Gelombang Mikro LEDONE

1. Produk Lebihview

The LEDONE Microwave Motion Sensor is designed for commercial lighting applications, offering advanced motion detection and 0-10V dimming capabilities. This sensor provides reliable performance across a wide range of environmental conditions, contributing to energy efficiency and automated lighting control.

Depan view of the LEDONE Microwave Motion Sensor, a white rectangular device with a small black sensor window and a white adjustment knob, with wires extending from one end.

Rajah 1: Depan view of the LEDONE Microwave Motion Sensor.

Ciri-ciri Utama:

0-10V Boleh dimalapkan: Compatible with most popular dimmers for commercial projects.
360° Wide Angle Detection: Detects movement up to 20 feet from any angle.
Stabil dan Boleh Dipercayai: Operates effectively in temperatures from -40°F to 158°F.
Penjimatan Tenaga: Automatic on/off functionality based on detected movement.

2. Persediaan dan Pemasangan

Proper installation is crucial for optimal performance. This device is designed for wall mount installation and requires a corded electric connection. Consult a qualified electrician for wiring if you are unfamiliar with electrical installations.

sebelah view of the LEDONE Microwave Motion Sensor showing multiple colored wires (red, black, white, grey, purple) extending from one end, indicating electrical connections.

Rajah 2: Sisi view of the sensor with wiring connections.

Langkah Pemasangan:

Pemutusan Kuasa: Ensure power to the installation area is turned off at the circuit breaker before beginning any wiring.
Pemasangan: Securely mount the sensor to a wall using appropriate hardware. Ensure the sensor has an unobstructed view daripada kawasan pengesanan.
Pendawaian: Connect the sensor to the power supply and lighting fixture according to local electrical codes and the wiring diagram provided with the product packaging. The sensor supports 0-10V dimming; ensure proper connections for this functionality if desired.
Sambungan Kuasa: Setelah semua sambungan selamat, kembalikan kuasa ke litar.
Ujian Permulaan: Perform an initial test to ensure the sensor powers on and the connected lights respond.

Konfigurasi:

The sensor can be configured using either DIP switches or a remote control (sold separately). Refer to the specific instructions included with your product for detailed settings related to detection sensitivity, hold time, and daylight harvesting.

3. Arahan Operasi

The LEDONE Microwave Motion Sensor operates by detecting movement within its 360-degree detection zone. Once configured, the sensor will automatically control connected lighting based on presence detection and ambient light levels (if daylight harvesting is enabled).

Operasi automatik:

When motion is detected, the sensor will activate the connected lighting.
If no motion is detected for a pre-set "hold time," the sensor will either dim the lights (if 0-10V dimming is configured) or turn them off completely.
The detection range is up to 20 feet, covering a wide area.

Melaraskan Tetapan:

Settings such as sensitivity, hold time, and dimming levels can be adjusted via the DIP switches on the unit or through a compatible remote control. Consult the specific configuration guide for your model to understand each setting's function and how to adjust it.

4. Penyelenggaraan

The LEDONE Microwave Motion Sensor is designed for minimal maintenance. Regular checks can help ensure continued optimal performance.

Pembersihan: Periodically wipe the sensor's surface with a soft, dry cloth to remove dust or debris. Avoid using abrasive cleaners or solvents.
Pemeriksaan: Annually inspect the wiring connections for any signs of wear or damage. Ensure the sensor is securely mounted.
Faktor Persekitaran: Ensure the sensor is not obstructed by new installations or objects that could interfere with its detection field.

5. Penyelesaian masalah

If you encounter issues with your LEDONE Microwave Motion Sensor, refer to the following common troubleshooting steps:

Masalah	Kemungkinan Punca	Penyelesaian
Lampu tidak menyala dengan gerakan.	Tiada kuasa pada sensor. Pendawaian yang tidak betul. Sensor sensitivity set too low. Halangan dalam laluan pengesanan.	Check circuit breaker and power connections. Sahkan pendawaian berdasarkan gambar rajah. Increase sensor sensitivity via DIP switch or remote. Keluarkan sebarang halangan.
Lights remain on or turn on without motion.	Sensor sensitivity set too high. Interference from external sources (e.g., HVAC, vibrations). Hold time set too long.	Decrease sensor sensitivity. Relocate sensor or identify source of interference. Adjust hold time setting.
Dimming function not working.	Incorrect 0-10V wiring. Incompatible dimmer or fixture.	Verify 0-10V wiring connections. Ensure connected fixture and dimmer are 0-10V compatible.

If the problem persists after attempting these solutions, contact LEDONE customer support for further assistance.

6. Spesifikasi

Ciri	Perincian
Jenama	LEDONE
Nombor Model	0-10V DIMMING (LOD-BRI810-B-D)
warna	putih
Sumber Kuasa	Corded Electric (120-277 Vac)
Julat Maksimum	20 Kaki
Jenis Pemasangan	Lekap di dinding
Sudut Pengesanan	360 Darjah
Suhu Operasi	-40°F hingga 158°F
Dimensi Produk	4.17 x 1.6 x 1.46 inci
Berat Barang	1 paun

7. Maklumat Waranti

LEDONE products are manufactured to high standards. For specific warranty terms and conditions applicable to your Microwave Motion Sensor, please refer to the documentation included with your purchase or visit the official LEDONE website. LEDONE is based in California and aims to provide quality products and services.

8. Sokongan Pelanggan

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your LEDONE Microwave Motion Sensor, please contact LEDONE customer support.

You can typically find contact information on the LEDONE official webtapak atau melalui peruncit tempat produk itu dibeli.

Sumber Dalam Talian: Lawati LEDONE Store on Amazon untuk maklumat dan sokongan produk tambahan.

LEDONE 0-10V DIMMING (LOD-BRI810-B-D)